[1] 谢鲁.膨胀管分离装置研究[J].火工品, 1997, 2:1-6.
XIE Lu. Study on the expansion tube separating device[J]. Initiators & Pyrotechnics, 1997, 2:1-6.
[2]

谢鲁.膨胀管分离装置的研究[D].南京: 南京理工大学, 2005.

[3]

夏晓宇.火工分离装置工作过程性能分析[D].长沙: 国防科学技术大学, 2009.

[4] 王江, 李虹.线性分离装置分离性能仿真[J].强度与环境, 2011, 38(2):28-33.  doi: 10.3969/j.issn.1006-3919.2011.02.006
WANG Jiang, LI Hong. Simulation on the separating performance of linear separation system[J]. Structure & Environment Engineering, 2011, 38(2):28-33.  doi: 10.3969/j.issn.1006-3919.2011.02.006
[5] 宋保永, 吴晗玲, 王帅, 等.膨胀管分离装置设计参数的敏感性分析[J].北京理工大学学报, 2013, 33(2):76-79.
SONG Baoyong, WU Hanling, WANG Shuai, et al. Design parameter sensitivity analysis of super-zip separation devices[J]. Transactions of Beijing Institute of Technology, 2013, 33(2):76-79.
[6] 宋保永, 胡振兴, 孙璟, 等.膨胀管分离装置分离时间测试研究[J].实验力学, 2015, 30(2):151-156.
SONG Baoyong, HU Zhenxing, SUN Jing, et al. On the measurement of the separation time of expanding tube separation device[J]. Journal of Experimental Mechanics, 2015, 30(2):151-156.
[7]

孙璟, 阳志光.膨胀管分离装置爆炸分离过程仿真和优化[C]//第九届全国爆炸与安全技术学术会议.沈阳, 2006: 140-143.

[8]

阳志光.航天运载器线式火工分离装置结构优化设计[D].北京: 北京工业大学, 2007.

[9]

DREXELIUS V, LAKE E, SCHIMMEL M. Explosive severance means: US3486410[P]. 1969-12-30.

[10]

ANDERSON M, HEIDEMANN W. A study of an advanced confined linear energy source: NASA-CR-112096-19720022304[R]. 1972.

[11]

BRANDT O, HARRIS J. Explosive system: US3698281[P]. 1972-10-17.

[12]

NOEL V, VAN SHOUBROUEK F. Separation system: US004685376[P]. 1987-08-11.

[13]

FRITZ J. Separation joint technology[C]//39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Huntsville, Alabama. 2003.

[14]

CLEVELAND M. Low shock separation joint and method therefore: WO2005040713A2[P]. 2005-05-06.

[15]

BLAIN J, NELSON R, GROSSKRUEGER D, et al. Separation system: US005969287[P]. 1999-10-19.

[16]

CLEVELAND M. Low shock separation joint and method therefore: US20050193916A1[P]. 2005-09-08.

[17]

CLEVELAND M. Low shock separation joint and method therefor: US007261038B2[P]. 2007-08-28.

[18]

GOLDEN P, BEAUDOIN J, HOSKINS R, et al. Low shock rocket body separation: US008607705B2[P]. 2013-12-17.

[19] HAN C, SUN C. Attenuation of stress wave propagation in periodically layered elastic media[J]. Journal of Sound and Vibration, 2001, 243(4):747-761.  doi: 10.1006/jsvi.2000.3420
[20] HUI D, DUTTA P. A new concept of shock mitigation by impedance-graded materials[J]. Composites:Part B, 2011, 42:2181-2184.  doi: 10.1016/j.compositesb.2011.05.016
[21]

NEMAT-NASSER S, AMIRKHIZI A. Microstructural design for stress wave energy management: ONR N00014-09-1-0547[R]. 2013.

[22]

RAFIEE-DEHKHARGHANI R. Stress wave scattering in solids for mitigating impulsive loadings[D]. New York: the State University of New York at Buffalo, 2014.

[23] RAFIEE-DEHKHARGHANI R, AREF A, DARGUSH G. Characterization of multilayered stress wave attenuators subjected to impulsive transient loadings[J]. Journal of Engineering Mechanics, 2015, 141(4):04014137.  doi: 10.1061/(ASCE)EM.1943-7889.0000859
[24] NEMAT-NASSER S, SADEGHI H, AMIRKHIZI A, et al. Phononic layered composites for stress-wave attenuation[J]. Mechanics Research Communications, 2015, 68:65-69.  doi: 10.1016/j.mechrescom.2015.05.001
[25] RAFIEE-DEHKHARGHANI R, AREF A, DARGUSH G. Planar stress wave attenuation in plates with circular voids and inclusions[J]. Composites:Part B, 2015, 75:307-318.  doi: 10.1016/j.compositesb.2015.01.051
[26] 任怀宇.粘弹阻尼减振在导弹隔冲击结构中的应用[J].宇航学报, 2007, 28(6):1494-1499.  doi: 10.3321/j.issn:1000-1328.2007.06.011
REN Huaiyu. The application of viscoelastic damping vibration suppression for shock-isolation structure of multistage missile[J]. Journal of Astronautics, 2007, 28(6):1494-1499.  doi: 10.3321/j.issn:1000-1328.2007.06.011
[27] 王贤宙.粘弹性阻尼安装架结构设计及减振效能分析[J].电子机械工程, 2015, 31(1):35-38.  doi: 10.3969/j.issn.1008-5300.2015.01.008
WANG Xianzhou. Structure design and vibration reduction performance analysis of viscoelastic damping mounting rack[J]. Electro-Mechanical Engineering, 2015, 31(1):35-38.  doi: 10.3969/j.issn.1008-5300.2015.01.008
[28] HOOPUTRA H, GESE H, DELL H, et al. A comprehensive failure model for crashworthiness simulation of aluminium extrusions[J]. International Journal of Crashworthiness, 2004, 9(5):449-464.  doi: 10.1533/ijcr.2004.0289
[29]

Dassault Systèmes. Progressive failure analysis of thin-wall aluminum extrusion under quasi-static and dynamic loads[Z]. Abaqus Example Problems Manual, 2011.