[1] 赵寿根, 何著, 杨嘉陵, 等.几种航空铝材动态力学性能实验[J].北京航空航天大学学报, 2007, 33(8):982-985. doi: 10.3969/j.issn.1001-5965.2007.08.027

Zhao Shougen, He Zhu, Yang Jialing, et al. Experiment investigation of dynamic material property of aluminum alloy[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(8):982-985. doi: 10.3969/j.issn.1001-5965.2007.08.027
[2] Holt D L, Babcock S G, Green S J, et al. The strain-rate dependence of the flow stress in some aluminum alloys[J]. Transactions of the ASM: Transactions Quarterly, 1967, 60(2):152-159.
[3] 王洪欣, 查晓雄.3004铝的动态力学性能及本构关系[J].华中科技大学学报, 2011, 39(5):39-42.

Wang Hongxin, Zha Xiaoxiong. Dynamic mechanical behavior and constitutive model of 3004 aluminum alloys[J]. Journal of Huazhong University of Science and Technology, 2011, 39(5):39-42.
[4] 张伟, 魏刚, 肖新科, 等.2A12铝合金本构关系和失效模型[J].兵工学报, 2013, 34(3):276-282. http://d.old.wanfangdata.com.cn/Periodical/bgxb201303004

Zhang Wei, Wei Gang, Xiao Xinke, et al. Constitutive relation and fracture criterion of 2A12 aluminum alloys[J]. Acta Armamentarii, 2013, 34(3):276-282. http://d.old.wanfangdata.com.cn/Periodical/bgxb201303004
[5] 张伟, 肖新科, 魏刚.7A04铝合金的本构关系和失效模型[J].爆炸与冲击, 2011, 31(1):81-87. doi: 10.11883/1001-1455(2011)01-0081-07

Zhang Wei, Xiao Xinke, Wei Gang. Constitutive relation and fracture model of 7A04 aluminum alloys[J]. Explosion and Shock Waves, 2011, 31(1):81-87. doi: 10.11883/1001-1455(2011)01-0081-07
[6] 张正礼.2024铝合金动态力学本构模型构建[J].沈阳航空航天大学学报, 2014, 31(2):47-50. doi: 10.3969/j.issn.2095-1248.2014.02.011

Zhang Zhengli. Construction of dynamic mechanical constitutive model of 2024 aluminum[J]. Journal of Shenyang Aerospace University, 2014, 31(2):47-50. doi: 10.3969/j.issn.2095-1248.2014.02.011
[7] 朱耀.AA 7055铝合金在不同温度及应变率下力学性能的实验研究[D].哈尔滨: 哈尔滨工业大学, 2010. http://cdmd.cnki.com.cn/Article/CDMD-10213-1011278756.htm
[8] 谢灿军, 童明波, 刘富, 等.7075-T6铝合金动态力学试验及本构模型研究[J].振动与冲击, 2014, 33(18):100-114. http://d.old.wanfangdata.com.cn/Periodical/zdycj201418018

Xie Canjun, Tong Mingbo, Liu Fu, et al. Dynamic tests and constitutive model for 7075-T6 aluminum alloy[J]. Journal of Vibration and Shock, 2014, 33(18):110-114. http://d.old.wanfangdata.com.cn/Periodical/zdycj201418018
[9] 杨超, 朱涛, 肖守讷.列车车体铝合金动态力学性能及其对吸能的影响[J].中南大学学报(自然科学版), 2015, 46(7):2744-2749.

Yang Chao, Zhu Tao, Xiao Shoune. Dynamic mechanical properties of aluminum alloy used in carbodies of trains and effect on energy absorption[J]. Journal of Central South University (Science and Technology), 2015, 46(7):2744-2749.
[10] Yatnalkar R S. Experimental investigation of plastic deformation of Ti-6Al-4V under various loading conditions[D]. The Ohio State: The Ohio State University, 2010.
[11] Wood P K C, Schley C A, Kenny S, et al. Validating performance of automotive materials at high strain rate for improved crash design[C]//9th International LS-DYNA Users Conference. Detroit, 2006.
[12] 白春玉, 刘小川, 周苏枫, 等.中应变率下材料动态拉伸关键参数测试方法[J].爆炸与冲击, 2015, 35(4):507-512. doi: 10.11883/1001-1455(2015)04-0507-06

Bai Chunyu, Liu Xiaochuan, Zhou Sufeng, et al. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rate[J]. Explosion and Shock Waves, 2015, 35(4):507-512. doi: 10.11883/1001-1455(2015)04-0507-06
[13] 余同希, 邱信明.冲击动力学[M].北京:清华大学出版社, 2011.
[14] Johnson G R, Cook W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]//Proceedings of the 7th International Symposium on Ballistics. The Hague, Netherlands, 1983: 541-547.
[15] Kang W J, Cho S S, Huh H, et al. Modified Johnson-Cook model for vehicle body crashworthiness simulation[J]. International Journal of Vehicle Design, 1999, 21(4):424-435. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=caec5e2883f57b1720cefbd750b33c61
[16] Cowper G R, Symonds P S. Strain hardening and strain rate effects in the impact loading of cantilever beams[R]. Division of Applied Mathematics, Brown University, 1957.
[17] Huh H, Kang W J, Han S S. A tension split Hopkinson bar for investigating the dynamic behavior of sheet metals[J]. Experimental Mechanics, 2002, 42(1):8-17. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=355b24d3ea891696370e4add7922dbb8