粒子入射角度对冷喷涂涂层形成的影响

Study of incidence angle of particle on its coating formation in cold spraying

1.
School of Energy and Power Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China;
2.
LERMPS-UTBM, Site de Sévenans, 90010 Belfort Cedex, France

摘要: 采用有限元数值计算方法，研究冷喷涂材料改性过程中铜粒子与铜基体非垂直碰撞的变形行为。针对单个粒子相同入射速度不同入射角度的碰撞条件，探讨粒子与基体的结合强度、侵彻深度以及绝热剪切失稳的发生条件。结果表明：随着粒子入射角度的增大，侵彻深度逐渐减少，粒子与基体的结合强度逐渐减弱。发生绝热剪切失稳的条件是入射速度的法向分量大于碰撞过程的临界速度。
- 流体力学 /
- 绝热剪切失稳 /
- 数值模拟 /
- 冷喷涂 /
- 斜碰撞
Abstract: Based on developed numerical simulation method, the impacting behavior of copper particle colliding copper substrate in process of transforming material property is investigated. The join strength, penetration depth and condition of emerging adiabatic shear instability are discussed with single particle of uniform speed and different angle. It is revealed that with increasing incidence angle, the penetration depth decreases and the join strength is weakened. Adiabatic shear instability will take place when the normal component of particle velocity excesses critical value.
- fluid mechanics /
- adiabatic shear instability /
- numerical simulation /
- cold spraying /
- tilting collision

点击查看大图