基于动能定理的火炮炮闩系统冲击试验台设计

杨艳峰 郑坚 狄长春 王宏凯 王帅

杨艳峰, 郑坚, 狄长春, 王宏凯, 王帅. 基于动能定理的火炮炮闩系统冲击试验台设计[J]. 爆炸与冲击, 2015, 35(1): 76-81. doi: 10.11883/1001-1455(2015)01-0076-06
引用本文: 杨艳峰, 郑坚, 狄长春, 王宏凯, 王帅. 基于动能定理的火炮炮闩系统冲击试验台设计[J]. 爆炸与冲击, 2015, 35(1): 76-81. doi: 10.11883/1001-1455(2015)01-0076-06
Yang Yan-feng, Zheng Jian, Di Chang-chun, Wang Hong-kai, Wang Shuai. Shock test platform design of gun breech system based on kinetic energy theorem[J]. Explosion And Shock Waves, 2015, 35(1): 76-81. doi: 10.11883/1001-1455(2015)01-0076-06
Citation: Yang Yan-feng, Zheng Jian, Di Chang-chun, Wang Hong-kai, Wang Shuai. Shock test platform design of gun breech system based on kinetic energy theorem[J]. Explosion And Shock Waves, 2015, 35(1): 76-81. doi: 10.11883/1001-1455(2015)01-0076-06

基于动能定理的火炮炮闩系统冲击试验台设计

doi: 10.11883/1001-1455(2015)01-0076-06
基金项目: 国家自然科学基金项目(50645019)
详细信息
    作者简介:

    杨艳峰(1988—), 男, 博士研究生, yyf2012yyf@163.com

  • 中图分类号: O389;TJ303.3

Shock test platform design of gun breech system based on kinetic energy theorem

  • 摘要: 针对火炮射击条件下炮闩系统性能数据测量困难,提出将炮闩系统单独出来建立系统冲击试验台进行分析研究的思路。在确定了试验台设计原理的前提下,通过对自动开闩虚拟样机模型进行改进,建立了试验台原理模型。依据动能定理,确定了炮闩系统冲击试验台实现开闩所需的最小开闩力。在最小开闩力下,基于试验台原理模型分别对开闩板质量取初始值m、10m、50m、100m时进行模拟实验,结果表明:4种工况下皆未实现开闩,但随着开闩板质量的增加,外力做功损失的能量越小,曲柄转过角度越大,越容易实现开闩。研究结果可为试验台建立提供理论支撑。
  • 图  1  炮闩系统冲击试验台原理模型

    Figure  1.  Principle model showing the shock test platform of breech system

    图  2  炮闩系统冲击试验台原理模型

    Figure  2.  Principle model showing the shock test platform of breech system

    图  3  自动开闩时曲柄转动角度曲线

    Figure  3.  Curve of the crank lever's rotation angleunder auto breechblock operating

    图  4  曲柄转角和开闩板位移曲线

    Figure  4.  Curves of the crank lever's rotation angle andthe breechblock operating cam's displacement

    图  5  不同工况下曲柄转动角度曲线

    Figure  5.  Curves of the crank lever's rotation angleunder different working conditions

    图  6  开闩板质量对开闩参数影响规律

    Figure  6.  Influence of the mass of the breechblock operating camon the parameters of breechblock operating

    图  7  不同工况下开闩板位移曲线

    Figure  7.  Curves of the breechblock operating cam'sdisplacement under different working conditions

    图  8  开闩板质量对外力做功影响规律

    Figure  8.  Influence of the mass of breechblock operating camon the work of the force

    表  1  不同工况下开闩参数

    Table  1.   Parameters of breechblock operating under different working conditions

    M ts/s ta/s θmax/(°)
    m 0.047 0.153 19.2
    10m 0.140 0.353 47.1
    50m 0.314 0.511 87.6
    100m 0.444 0.542 93.6
    下载: 导出CSV

    表  2  外力做功

    Table  2.   Work of the force

    M Smax/mm W/J W1/J η/%
    m 255.0 132.1 19.2 14.5
    10m 297.7 154.3 62.7 40.6
    50m 355.6 184.3 147.3 79.9
    100m 362.2 187.7 163.2 86.9
    下载: 导出CSV
  • [1] 曹立军, 秦俊奇, 王兴贵.炮闩系统故障仿真预测系统研究[J].火炮发射与控制学报, 2002(2): 50-53.

    Cao Li-jun, Qin Jun-qi, Wang Xing-gui. Research of fault simulation and prediction system for breech mechanism[J]. Journal of Gun Launch & Control, 2002(2): 50-53.
    [2] 杜中华, 王兴贵, 马吉胜.基于虚拟样机技术的某型火炮开闩过程动力学特性研究[J].机械工程学报, 2004, 40(6): 123-126.

    Du Zhong-hua, Wang Xing-gui, Ma Ji-sheng. Research on guns breech-opening process dynamic characteristics based on prototype technology[J]. Chinese Journal of Mechanical Engineering, 2004, 40(6): 123-126.
    [3] 石明全, 刘雷, 陈运生.火炮开闩过程动力学分析[J].弹道学报, 2003, 15(2): 23-28.

    Shi Ming-quan, Liu Lei, Chen Yun-sheng. Research on process of opening block and ejecting container of a certain gun[J]. Journal of Ballistics, 2003, 15(2): 23-28.
    [4] 陈永才, 李鹏, 熊宜光.炮闩闩体击针孔强度仿真计算与结构改进[J].军械工程学院学报, 2009, 21(2): 38-40.

    Chen Yong-cai, Li Peng, Xiong Yi-guang. Analyzing the strength of gun breech block and upgrading the structure of gun firing pin[J]. Journal of Ordnance Engineering College, 2009, 21(2): 38-40.
    [5] 谢锋, 何行.基于有限元模型的炮闩结构的静力学强度分析[J].科技情报开发与经济, 2007, 17(9): 182-183.

    Xie Feng, He Hang. Analysis on the static strength of the breechblock structure based on FEM[J]. Sci-Tech Information Development & Economy, 2007, 17(9): 182-183.
    [6] 张金忠, 丛孟凯, 张双喜, 等. 125 mm坦克炮炮闩抽筒装置故障仿真分析[J].火力与指挥控制, 2012, 37(7): 155-157.

    Zhang Jin-zhong, Cong Meng-kai, Zhang Shuang-xi, et al. Research on failure analysis based on simulation about 125mm tank gun breechblock extractor mechanism[J]. Fire Control & Command Control, 2012, 37(7): 155-157.
    [7] 项立银, 顾克秋.基于响应面法炮尾炮闩6σ稳健优化设计[J].机械制造与研究, 2011, 40(1): 20-22.

    Xiang Li-yin, Gu Ke-qiu. 6σ Robust optimal design of breech and block's fillet based on respond surface method[J]. Machine Building Automation, 2011, 40(1): 20-22.
    [8] 张建, 唐文献, 徐省省, 等.火炮炮闩抽筒子结构优化设计[J].兵工学报, 2012, 33(6): 647-651.

    Zhang Jian, Tang Wen-xian, Xu Xing-xing, et al. Structural optimization design for breechblock extractor[J]. Acta Armamentarii, 2012, 33(6): 647-651.
  • 加载中
图(8) / 表(2)
计量
  • 文章访问数:  3090
  • HTML全文浏览量:  335
  • PDF下载量:  413
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-06-13
  • 修回日期:  2013-10-17
  • 刊出日期:  2015-01-25

目录

    /

    返回文章
    返回