A new type of explosive diode and its mechanism
-
摘要: 针对工业上起爆网路的早爆问题, 设计并研制了一种可控单向传爆的新型爆炸二极管, 通过一系列理论计算以及对称结构正反起爆实验, 研究了该爆炸二极管的正向稳定传爆及反向可靠隔爆机理和限制因素。结果表明:该爆炸二极管可实现正向稳定传爆, 反向可靠隔爆, 二者对应的限制因素分别为激发药药量和延期体长度。理论分析得到的激发药的极限药量和延期体的临界尺寸与实验结果较为吻合。Abstract: In the present work, to address the premature explosion for the detonating network, we designed a new type of irreversible detonation explosive diode and studied the mechanism and limiting factors about the explosive diode in transmitting the positive detonation and stopping the backward detonation, using the calculation and experiments of the symmetrical charge structure. The results show that the new type of explosive diode can achieve this aim and that the maximum amount of the firing charge and the crucial length of the delay elements from the theoretical calculation are fairly consistent with those from the experiments.
-
Key words:
- explosive diode /
- mass limited of firing charge /
- crucial length /
- delay elements
-
物质 KClO3 C3H3N6O6 CO2 H2O KCl N2 O2 Qf/(kJ·mol-1) 389.9 -65.44 395.43 241.7 430.8 0 0 ρ1, 0/(g·cm-3) ρ2, 0/(g·cm-3) M/mg m0/mg d/mm a1/(m·s-1) a2/(m·s-1) b1 b2 γ 7.8 1.0 80 5 0.2 4000 300 1.58 1.78 3 表 3 不同药量下的部分计算结果
Table 3. Results with variable masses of charge increase
m/mg v0/(m·s-1) pτ/GPa Df/(m·s-1) τ/ns p2·τ/(Pa2·s) 7 171.3 0.10 4265.6 93.8 9.51×108 9 453.3 0.47 4 692.3 85.2 1.91×1010 10 541.8 0.64 4 823.8 82.9 3.40×1010 11 617.7 0.80 4 935.8 81.0 5.21×1010 15 856.6 1.42 5 282.9 75.7 1.52×1011 20 1 083.5 2.14 5 606.2 71.4 3.28×1011 25 1 270.5 2.84 5 868.3 68.2 5.51×1011 30 1 433.4 3.52 6 093.6 65.6 8.15×1011 35 1 579.5 4.19 6 293.7 63.6 1.11×1012 40 1 713.2 4.84 6 475.2 61.8 1.45×1012 45 1 837.2 5.48 6 642.2 60.2 1.81×1012 50 1 953.3 6.11 6 797.6 58.8 2.20×1012 Table 4. Parameters for the calculation of stopping backward detonation
ρ3, 0/(g·cm-3) ρ4, 0/(g·cm-3) η/(Pa·s) pj/GPa c0/(m·s-1) a3/(m·s-1) a4/(m·s-1) b3 b4 γ 11.34 1.0 17 000 8.7 2 029 2 028 300 1.52 1.78 3 表 5 不同延期体长度下的计算结果
Table 5. Results with the variable lengths of the delay elements increase
X/mm vX/(m·s-1) pτ/GPa Df/(m·s-1) τ/μs $p_{\tau }^{2}$·τ/(Pa2·s) 0.5 353.0 1.040 3 069.8 0.33 3.54×1011 1.0 251.7 0.614 2 802.0 0.71 2.69×1011 1.5 179.5 0.364 2 598.8 1.15 1.53×1011 2.0 128.0 0.217 2 446.2 1.64 7.72×1010 2.2 111.8 0.177 2 396.6 1.84 5.78×1010 2.3 104.5 0.161 2 374.0 1.94 4.99×1010 2.5 91.2 0.132 2 332.6 2.14 3.71×1010 3.0 65.1 0.081 2 248.8 2.67 1.76×1010 3.5 46.4 0.051 2 187.4 3.20 8.33×109 4.0 33.1 0.033 2 142.7 3.73 4.01×109 4.5 23.6 0.022 2 110.3 4.26 1.97×109 5.0 16.8 0.014 2 087.0 4.79 9.83×108 表 6 不同激发药药量下的正向传爆率和反向隔爆率
Table 6. Percentages of transmission for positive detonation and stopping backward detonation with mass of firing charge increase
激发药药量/mg 延期体长度/mm 实验次数 正向传爆率/% 反向隔爆率/% 说明 50 5.50 10 100 100 当激发药药量为5 mg时,将不能爆轰产生飞片 40 5.50 10 100 100 30 5.50 10 100 100 20 5.50 10 100 100 15 5.50 10 60 60 12 5.50 10 40 40 10 5.50 10 0 0 5 5.50 10 0 0 表 7 不同延期体长度的隔爆率
Table 7. Percentage of stopping backward detonation with length of delay elements increase
第3段管壳装药/mg 延期体长度/mm 试验次数 隔爆率/% 20 6.00 10 100 20 5.00 10 100 20 4.50 10 100 20 4.30 10 100 20 4.20 10 100 20 4.10 10 40 20 4.00 10 0 -
[1] 王付景.论城市控制爆破中的安全管理[J].低碳世界, 2015(23):264-265. http://d.old.wanfangdata.com.cn/Periodical/dtsj201523161Wang Fujing. The safety management in the urban controlled blasting[J]. Low Carbon World, 2015(23):264-265. http://d.old.wanfangdata.com.cn/Periodical/dtsj201523161 [2] 王飞, 马宏昊, 沈兆武.一种应用于高温火区爆破中的不可逆起爆网路的耐温与传爆性能[J].含能材料, 2016, 24(1):106-110. http://d.old.wanfangdata.com.cn/Periodical/hncl201601018Wang Fei, Ma Honghao, Shen Zhaowu.Heat resistance and explosive transfer performance in the irreversible detonating network applied in high temperature mine blasting[J]. Chinese Journal of Energetic Materials, 2016, 24(1):106-110. http://d.old.wanfangdata.com.cn/Periodical/hncl201601018 [3] 田程.防控早爆引起群死群伤事故分析及应急预案[J].现代矿业, 2011(6):93-94. doi: 10.3969/j.issn.1674-6082.2011.06.035Tian Cheng. The accident analysis and contingency plans about death and injury caused by premature explosion[J]. Express Information of Mining Industry, 2011(6):93-94. doi: 10.3969/j.issn.1674-6082.2011.06.035 [4] 张艳.一起离奇露天早爆事故原因分析[C]//中国爆破器材行业协会乳化炸药安全技术交流会论文集.昆明, 2013: 78-80. [5] 张杰, 郝新民, 马伟.高温炮孔爆破的安全处理探讨[J].工程爆破, 2013, 19(1):102-104. http://d.old.wanfangdata.com.cn/Periodical/gcbp201301027Zhang Jie, Hao Xinmin, Ma Wei. Discussion on the safe disposal of the high temperature hole blasting[J]. Engineering Blasting, 2013, 19(1):102-104. http://d.old.wanfangdata.com.cn/Periodical/gcbp201301027 [6] 宋庆刚, 李迎.层次分析法在早爆事故中的应用[J].采矿技术, 2014(5):154-156. doi: 10.3969/j.issn.1671-2900.2014.05.063Song qingang, Li ying. The application of AHP in premature blasting[J]. Mining Technology, 2014(5):154-156. doi: 10.3969/j.issn.1671-2900.2014.05.063 [7] 沈兆武, 马宏昊.小直径低线密度装药的导爆索或雷管延期线的制作方法: CN101556130 A[P]. 2009-10-14. [8] 张宝平, 张庆明, 黄风雷.爆轰物理学[M].北京:兵器工业出版社, 2001:265-319. [9] 金韶华.炸药理论[M].西安:西北工业大学出版社, 2010:19-20. [10] 章冠人, 陈大年.凝聚炸药起爆动力学[M].北京:国防工业出版社, 1991:90-109. [11] Walker F E, Wasley R J. Critical energy for shock initiation of heterogeneous explosives[J]. Explosive Stoffe, 1969, 17(1):9. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK000001148783 [12] 奥尔连科Л Л.爆炸物理学[M].孙承纬, 译.北京: 科学出版社, 2011: 1301-1331. [13] Seay G E, Seely Jr L B. Initiation of a low-density PETN pressing by a plane shock wave[J]. Journal of Applied Physics, 1961, 32(6):1092-1097. doi: 10.1063/1.1736165 [14] Stirpe D, Johnson J O, Wackerle J. Shock initiation of XTX-8003 and pressed PETN[J]. Journal of Applied Physics, 1970, 41(9):3884-3893. doi: 10.1063/1.1659523 [15] 王作山, 刘玉存, 郑敏, 等.爆轰冲击波在有机隔板中衰减模型的研究[J].应用基础与工程科学学报, 2001, 9(4):316-319. doi: 10.3969/j.issn.1005-0930.2001.04.004Wang Zuoshan, Liu Yucun, Zheng Min, et al. Study on the attenuating model of detonation shock wave in the PMMA gap[J]. Journal of Basic Science and Engineering, 2001, 9(4):316-319. doi: 10.3969/j.issn.1005-0930.2001.04.004 [16] 王礼立.应力波基础[M].北京:国防工业出版社, 2005:154-155. [17] Green L G, Lee E L. Detonation pressure measurements on PETN[C]//Proceedings of 13th International Detonation Symposium. America: Norfolk, 2006: 1141-1150. [18] Mineev V N, Mineev A V. Viscosity of metals under shock-loading conditions[J]. Le Journal de Physique IV, 1997, 7(C3):583-585. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10fdb1e3e88c46c13ccf333894f60c23