一种低附带弹药金属颗粒定向加载技术

李俊承; 樊壮卿; 梁斌; 康建毅; 高海鹰; 陈菁; 卢永刚

doi:10.11883/bzycj-2016-0376

一种低附带弹药金属颗粒定向加载技术

doi: 10.11883/bzycj-2016-0376

1.
中国工程物理研究院总体工程研究所, 四川绵阳 621999
2.
第三军医大学野战外科研究所, 重庆 400042

基金项目:

国家自然科学基金委员会-中国工程物理研究院联合基金项目 U1330139

详细信息

作者简介:
李俊承(1984-), 男, 博士研究生, 工程师

通讯作者:
卢永刚, lygcaep@263.net

中图分类号: O389
计量
- 文章访问数: 5241
- HTML全文浏览量: 1978
- PDF下载量: 176
- 被引次数: 0
出版历程
- 收稿日期: 2016-12-13
- 修回日期: 2017-03-22
- 刊出日期: 2018-07-25

Experimental study on directed loading metal particles of low collateral damage ammunition

1.
Institute of Systems of Engineering, China Academy of Engineering Physics, Mianyang 621999, Sichuan, China
2.
Institute of Surgery, Third Military Medical University, Chongqing 400042, China

摘要

摘要: 为了实现低附带弹药金属颗粒定向可控加载，研制了采用爆轰方式驱动低附带弹药金属颗粒的发射装置，并进行了不同尺寸钨球颗粒与不同装药比的发射实验。运用高速摄影与高速红外摄影捕捉爆轰驱动过程中颗粒抛撒分布和速度，并采用CT断层扫描和三维图像重建再现了颗粒在肥皂靶中的三维空间分布。实验结果揭示了爆轰驱动下颗粒加速、减速和散落3个阶段的特征。钨球颗粒速度均值范围为689.84~889.14 m/s，最大侵彻深度为65.23~167.35 mm，颗粒加载上靶率在30%以上。发射装置中金属颗粒/装药质量比可调，能重复使用。采用肥皂靶、高速摄影、高速红外相结合的测试方法有效可行，CT图像重建用于终点弹道参数判读能提高结果分析精度。以上结果可为研究低附带弹药对生物目标的毁伤效应、致伤机理和生物损伤判定与救治提供有效可行的技术与方法。
- 低附带 /
- 金属颗粒 /
- 定向加载 /
- 发射装置
Abstract: In this work, to realize explosive directed loading metal particles of low collateral damage ammunition, we developed a launching device and used it to carry out the dispersing of tungsten particles of different sizes and charging ratios. We captured the dispersion attitude and velocity of tungsten particles using high speed photography and high speed infrared photography, and demonstrated the three dimensional spatial distribution of tungsten particles inside the soap target using computerized tomography and three dimensional reconstruction. The results revealed the three phases of detonation-driven particles, i.e. acceleration, deceleration, and scattering. For particles of different sizes, the average velocity ranged from 689.84 m/s to 889.14 m/s, and the maximum penetrating depth ranged from 65.23 mm to 167.35 mm. The launching device was observed to perform well at directed loading metal particles with a rate of over 30% in hitting the target. We adjusted the mass ratio of the charge to the particles to meet various experimental requirements and improved the analysis accuracy of terminal ballistics parameters using the CT image reconstruction technique. Our study here can serve as a useful technique for further investigation of the damage effects, wounding mechanism, injury evaluation and treatment of low collateral damage ammunition.
- low collateral damage ammunition /
- metal particle /
- directed loading /
- launching device

HTML全文

图 1 发射装置结构示意图

Figure 1. Launching device

下载: 全尺寸图片幻灯片

图 2 现场布置

Figure 2. Layout of experiment

下载: 全尺寸图片幻灯片

图 3 爆轰驱动的高速红外图像

Figure 3. High speed infrared images of detonation-driven particles

下载: 全尺寸图片幻灯片

图 4 爆轰驱动过程的高速摄影

Figure 4. High speed photos of detonation-driven particles

下载: 全尺寸图片幻灯片

图 5 回收靶影像分析得到的钨球颗粒散布情况

Figure 5. Distribution of tungsten particles obtained by the analyses of soap target image

下载: 全尺寸图片幻灯片

图 6 柱形装药驱动下的颗粒周向飞散

Figure 6. Illustration of particles' circuital flying driven by cylindrical charge

下载: 全尺寸图片幻灯片

图 7 不同装药量下颗粒平均速度随直径的变化曲线

Figure 7. Average velocities of particles versus diameter with different charge ratios

下载: 全尺寸图片幻灯片

图 8 各组肥皂靶CT扫描图像

Figure 8. CT images of soap targets

下载: 全尺寸图片幻灯片

表 1 实验工况

Table 1. Tungsten particles used in experiments

编号	颗粒状材料	d/μm	m₀/g	ρ/(g·cm^-3)	m/g	L/cm
1	球形钨合金	50	6.8	1.7	6.8	40
2	球形钨合金	200	6.8	1.7	6.8	40
3	球形钨合金	500	6.8	1.7	6.8	40
4	球形钨合金	1 000	6.8	1.7	6.8	40
5	球形钨合金	1 500	6.8	1.7	6.8	40
6	球形钨合金	50	6.8	1.7	13.6	40
7	球形钨合金	200	6.8	1.7	13.6	40
8	球形钨合金	500	6.8	1.7	13.6	40
9	球形钨合金	1 000	6.8	1.7	13.6	40
10	球形钨合金	1 500	6.8	1.7	13.6	40

下载: 导出CSV

表 2 不同直径颗粒打击肥皂靶的弹道参数统计

Table 2. Ballistic parameters of the soap target penetrated by particles with different diameters

D/μm	颗粒侵彻深度分布(m=6.8 g)		h_max/mm	D/μm	颗粒侵彻深度分布(m=13.6 g)		h_max/mm
D/μm	h/mm	P/%	h_max/mm	D/μm	h/mm	P/%	h_max/mm
50	≤13.82	12.98	65.23	50	≤14.56	10.93	102.72
	13.82~25.26	58.56			14.56~31.70	48.77
	≥25.26	28.46			≥31.70	40.30
200	≤18.24	19.37	70.26	200	≤16.85	15.96	118.46
	18.24~52.62	67.17			16.85~46.55	43.62
	≥52.62	13.46			≥46.55	40.42
500	≤10.00	6.36	76.52	500	≤38.67	22.92	124.63
	10.00~43.00	50.63			38.67~55.88	54.99
	≥43.00	43.01			≥55.88	22.09
1 000	≤21.75	21.04	110.58	1 000	≤24.00	11.42	130.98
	21.75~87.00	66.15			24.00~50.50	47.85
	≥87.00	12.81			≥50.50	40.73
1 500	≤26.18	18.16	115.00	1 500	≤25.72	13.17	167.35
	26.18~65.37	39.71			25.72~52.30	39.82
	≥65.37	42.13			≥52.30	47.01

下载: 导出CSV

参考文献(8)

[1]	刘俊, 姚文进, 郑宇, 等.低附带毁伤弹药的炸药/钨粉质量比对钨粉抛撒特性的影响[J].含能材料, 2015, 23(3):258-264. doi: 10.11943/j.issn.1006-9941.2015.03.011 LIU Jun, YAO Wenjin, ZHANG Yu, et al. Effect of explosive/tugsten powder mass ratio for LCD ammunition on dispersal characteristics of tungsten powder[J]. Chinese Journal of Energetic Materials, 2015, 23(3):258-264. doi: 10.11943/j.issn.1006-9941.2015.03.011
[2]	蒋海燕, 王树山, 魏继锋, 等.爆炸驱动固/液介质爆炸抛撒的实验研究[J].爆炸与冲击, 2014, 34(5):574-579. doi: 10.11883/1001-1455(2014)05-0574-06 JIANG Haiyan, WANG Shushan, WEI Jifeng, et al. Explosive dispersal of solid and liquid media: experimental investigation[J]. Explosion and Shock Waves, 2014, 34(5):574-579. doi: 10.11883/1001-1455(2014)05-0574-06
[3]	郑波, 陈力, 丁雁生, 等.温压炸药爆炸抛撒的运动规律[J].爆炸与冲击, 2008, 28(5):433-437. doi: 10.11883/1001-1455(2008)05-0433-05 ZHENG Bo, CHEN Li, DING Yansheng, et al. Dispersal process of explosion production of thermobaric explosive[J]. Explosion and Shock Waves, 2008, 28(5):433-437. doi: 10.11883/1001-1455(2008)05-0433-05
[4]	陈亚红, 白春华, 李建平, 等.装药比对中心炸药抛撒钨颗粒群影响的实验研究[J].实验力学, 2010, 25(6):661-666. http://www.cnki.com.cn/Article/CJFDTOTAL-SYLX201006010.htm CHEN Yahong, BAI Chunhua, LI Jianping, et al. Experimenal study of tungsten particles explosion dispersal with different charge ratios[J]. Journal of Experimental Mechanics, 2010, 25(6):661-666. http://www.cnki.com.cn/Article/CJFDTOTAL-SYLX201006010.htm
[5]	郭学永, 惠君明, 解立峰.燃料爆炸抛撒过程的实验研究[J].高压物理学报, 2005, 19(2):120-126. doi: 10.11858/gywlxb.2005.02.004 GUO Xueyong, HUI Junming, XIE Lifeng. Experimental study on the process of fuel explosion dispersion[J]. Chinese Journal of High Pressure Physics, 2005, 19(2):120-126. doi: 10.11858/gywlxb.2005.02.004
[6]	白春华, 陈亚红, 李建平, 等.爆炸抛撒金属颗粒群的装药方式[J].爆炸与冲击, 2010, 30(6):652-657. doi: 10.11883/1001-1455(2010)06-0652-06 BAI Chunhua, CHEN Yahong, LI Jianping, et al. Charge forms for explosion dispersal of metal particles[J]. Explosion and Shock Waves, 2010, 30(6):652-657. doi: 10.11883/1001-1455(2010)06-0652-06
[7]	陈亚红, 白春华, 刘意, 等.爆炸抛撒颗粒群动能特性的评价[J].火炸药学报, 2011, 34(4):45-48. http://www.cnki.com.cn/Article/CJFDTOTAL-MKBP200104000.htm CHEN Yahong, BAI Chunhua, LIU Yi, et al. Assessment on kinetic characteristics of granular swarm dispersed by explosion[J]. Chinese Journal of Explosives and Propellants, 2011, 34(4):45-48. http://www.cnki.com.cn/Article/CJFDTOTAL-MKBP200104000.htm
[8]	LIU G, HOU F, CAO B, et al. Experimental study of fuel-air explosive[J]. Combustion, Explosion, and Shock Waves, 2008, 44(2):213-217. doi: 10.1007/s10573-008-0028-7