Detonation wave structure of CL-20 composite explosive

Liu Danyang; Chen Lang; Wang Chen; Zhang Liansheng

doi:10.11883/1001-1455(2016)04-0568-05

Volume 36 Issue 4

Oct. 2018

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2016 > 36(4): 568-572

Liu Danyang, Chen Lang, Wang Chen, Zhang Liansheng. Detonation wave structure of CL-20 composite explosive[J]. Explosion And Shock Waves, 2016, 36(4): 568-572. doi: 10.11883/1001-1455(2016)04-0568-05

Citation:

Liu Danyang, Chen Lang, Wang Chen, Zhang Liansheng. Detonation wave structure of CL-20 composite explosive[J]. Explosion And Shock Waves, 2016, 36(4): 568-572. doi: 10.11883/1001-1455(2016)04-0568-05

Liu Danyang, Chen Lang, Wang Chen, Zhang Liansheng. Detonation wave structure of CL-20 composite explosive[J]. Explosion And Shock Waves, 2016, 36(4): 568-572. doi: 10.11883/1001-1455(2016)04-0568-05

Citation:

PDF( 1306 KB)

Detonation wave structure of CL-20 composite explosive

doi: 10.11883/1001-1455(2016)04-0568-05

State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

Received Date: 2015-01-06
Rev Recd Date: 2015-05-27
Publish Date: 2016-07-25

Abstract

Abstract

The detonation reaction of CL-20 composite explosive was numerically simulated to analyze its detonation reaction characteristics, and then an experimental setup was designed for measuring the particle velocity at the explosive-window interface. The laser interference method was used to measure the particle velocity at the interface between the LiF window and the C-1 explosive, and ninety-four percent of the C-1 explosive is CL-20 and six percent is binder by weight. And the measured particle velocity-time curves were processed by the method of derivation and piecewise fitting to determine the corresponding CJ point. According to the corresponding CJ velocity, the reaction time and CJ pressure were determined. The detonation reaction time of the C-1 explosive with the density of 1.943 g/cm³ is 38 ns and the CJ pressure is 34.2 GPa.
- mechanics of explosion,
- detonation reaction zone,
- laser interference method,
- CL-20 composite explosive

FullText(HTML)

References(12)

References

[1]	Seitz W L, Stacy H L, Wackerle J. Detonation reaction zone studies on TATB explosives[C]//Proceedings of 8th Symposium (International) on Detonation. Albuquerque, NM, USA, 1985.
[2]	Sheffield S A, Bloomquist D D, Tarver C M. Subnanosecond measurements of detonation fronts in solid high explosives[J]. The Journal of Chemical Physics, 1984, 80(8):3831-3844. doi: 10.1063/1.447164
[3]	韩勇, 龙新平, 刘柳, 等.炸药化学反应区结构试验研究[C]//全国危险物质与安全应急技术研讨会论文集: 上.2011: 230-235.
[4]	彭其先, 马如超.VISAR测试技术研究炸药反应区厚度[J].流体力学实验与测量, 2003, 17(1):43-45. doi: 10.3969/j.issn.1672-9897.2003.01.011 Peng Qixian, Ma Ruchao. VISAR used in explosive reaction zone measurement[J]. Experiments and Measurements in Fluid Mechanics, 2003, 17(1):43-45. doi: 10.3969/j.issn.1672-9897.2003.01.011
[5]	Loboiko B G, Lubyatinsky S N. Reaction zones of detonating solid explosives[J]. Combustion, Explosion, and Shock Waves, 2000, 36(6):716-733. doi: 10.1023/A:1002898505288
[6]	Livemore Software Technology Corporation. LS-DYNA users' manual[M]. Version 971. California: Lawerence Livermore National Laboratory, 2007: 15.11-15.12.
[7]	Lee E L, Tarver C M. Phenomenological model of shock initiation in heterogeneous explosives[J]. Physics of Fluids, 1980, 23(12):2362-2372. doi: 10.1063/1.862940
[8]	Tarver C M, Simpson R L, Urtiew P A. Shock initiation of an ε-CL-20-estane formulation[J]. AIP Conference Proceedings, 1996, 370(1):891-894.
[9]	李雪梅, 俞宇颖, 张林, 等. <100>LiF的低压冲击响应和1 550 nm波长下的窗口速度修正[J].物理学报, 2012, 61(15):414-419. Li Xuemei, Yu Yuying, Zhang Lin, et al. Elasic-plastic response of shocked <100>LiF and its window correction under 1 550 nm wavelength[J]. Acta Physica Sinica, 2012, 61(15):414-419.
[10]	赵万广, 周显明, 李加波, 等.LiF单晶的高压折射率及窗口速度的修正[J].高压物理学报, 2014, 28(5):571-576. http://www.cnki.com.cn/Article/CJFDTOTAL-GYWL201405011.htm Zhao Wanguang, Zhou Xianming, Li Jiabo, et al. Refractive index of LiF single crystal at high pressure and its window correction[J]. Chinese Journal of High Pressure Physics, 2014, 28(5):571-576. http://www.cnki.com.cn/Article/CJFDTOTAL-GYWL201405011.htm
[11]	Lubyatinsky S N, Loboiko B G. Density effect on detonation reaction zone length in solid explosives[J]. AIP Conference Proceedings, 1998, 429(1):743-746.
[12]	陈清畴, 蒋小华, 李敏, 等.HNS-Ⅳ炸药的点火增长模型[J].爆炸与冲击, 2012, 32(3):328-332. doi: 10.3969/j.issn.1001-1455.2012.03.017 Chen Qingchou, Jiang Xiaohua, Li Min, et al. Ignition and growth reactive flow model for HNS-Ⅳ explosive[J]. Explosion and Shock Waves, 2012, 32(3):328-332. doi: 10.3969/j.issn.1001-1455.2012.03.017

Relative Articles

[1]	XU Feng, JIANG Jianwei, WANG Shuyou, LI Mei, HAO Zehui. Response of CL-20-based high-detonation-velocity pressed explosive to drop-hammer impact[J]. Explosion And Shock Waves, 2025, 45(4): 041406. doi: 10.11883/bzycj-2024-0109
[2]	DING Tong, PEI Hongbo, GUO Wencan, ZHANG Xu, ZHENG Xianxu, LIU Cangli. Experimental study on detonation wave profiles in RDX-based aluminized explosives[J]. Explosion And Shock Waves, 2022, 42(6): 062301. doi: 10.11883/bzycj-2021-0217
[3]	QIN Jincheng, PEI Hongbo, HUANG Wenbin, ZHANG Xu, ZHENG Xianxu, ZHAO Feng. Measuring the detonation reaction zone structure ofJOB-9003 explosive using PDV[J]. Explosion And Shock Waves, 2019, 39(4): 041404. doi: 10.11883/bzycj-2018-0101
[4]	FENG Song, RAO Guoning, PENG Jinhua, WANG Bin. Experimental study of bubble pulsation by underwater explosion of CL-20-based explosives[J]. Explosion And Shock Waves, 2018, 38(4): 855-862. doi: 10.11883/bzycj-2017-0093
[5]	Pi Zhengdi, Chen Lang, Liu Danyang, Wu Junying. Shock initiation of CL-20 based explosives[J]. Explosion And Shock Waves, 2017, 37(6): 915-923. doi: 10.11883/1001-1455(2017)06-0915-09
[6]	Hu Hongwei, Yan Jiajia, Chen Lang, Guo Wei, Song Pu. Effect of aluminum powder content and its particle size on reaction characteristics for underwater explosion of CL-20-based explosives containing aluminum[J]. Explosion And Shock Waves, 2017, 37(1): 157-161. doi: 10.11883/1001-1455(2017)01-0157-05
[7]	Ma Xin, Chen Lang, Lu Feng, Wu Jun-ying. Calculation on multi-step thermal decomposition of HMX-and TATB-based composite explosive under cook-off conditions[J]. Explosion And Shock Waves, 2014, 34(1): 67-74. doi: 10.11883/1001-1455(2014)01-0067-08
[8]	Han Zao, Wang Bo-liang. A new method for predicting detonation velocity of composite explosive[J]. Explosion And Shock Waves, 2014, 34(4): 421-426. doi: 10.11883/1001-1455(2014)04-0421-06
[9]	Han Zhi-wei, Xie Li-feng, Deng Ji-ping, Xie Yi-chao, Chen Ji-yang. Synthesis of nano-CeO₂ powder by detonation method[J]. Explosion And Shock Waves, 2014, 34(1): 106-110. doi: 10.11883/1001-1455(2014)01-0106-05
[10]	Zhang Li, Chen Lang, Wang Chen, Wu Jun-ying. Molecular dynamics simulation on thermal decomposition mechanism of CL-20with different polymorphs[J]. Explosion And Shock Waves, 2014, 34(2): 188-194. doi: 10.11883/1001-1455(2014)02-0188-07
[11]	Zhong Wei, Tian Zhou. Calculation of quasi-static pressures for confined explosions considering chemical reactions under isobaric assumption[J]. Explosion And Shock Waves, 2013, 33(4): 375-380. doi: 10.11883/1001-1455(2013)04-0375-06
[12]	LI Xiao-jie, ZHAO Chun-feng. Characteristiccurvemethodforanalyzingmovementofflyerplate basedonuniversalequationofstateofexplosive[J]. Explosion And Shock Waves, 2012, 32(3): 237-242. doi: 10.11883/1001-1455(2012)03-0237-06
[13]	LI Xiao-jie, ZHANG Xiao-jun, LUO Ning, WANG Xiao-hong. Synthesisofcarbon-encapsulatedcoppernanoparticles bydetonationmethod[J]. Explosion And Shock Waves, 2012, 32(2): 174-178. doi: 10.11883/1001-1455(2012)02-0174-05
[14]	WANG Xiao-hong, LI Xiao-jie, YAN Hong-hao, YI Cai-hong, LUO Ning. Detonationreactioncharacteristicofemulsionexplosives usedfornano-materialssynthesi[J]. Explosion And Shock Waves, 2012, 32(5): 523-527. doi: 10.11883/1001-1455(2012)05-0523-05
[15]	TIAN Zhan-dong, ZHANG Zhen-yu, LU Fang-yun, ZHAOJian-heng. Modelingandsimulationoflaser-inducedignition usingdetailedchemicalkinetics[J]. Explosion And Shock Waves, 2011, 31(3): 285-289. doi: 10.11883/1001-1455(2011)03-0285-05
[16]	WANG De-tian, LI Ze-ren, WU Jian-rong, LIU Shou-xian, LIU Jun, MENG Jian-hua, PENG Qi-xian, CHEN Guang-hua, LIU Qiao. An optical-fiber displacement interferometer for measuring velocities of explosively-driven metal plates[J]. Explosion And Shock Waves, 2009, 29(1): 105-108. doi: 10.11883/1001-1455(2009)01-0105-04
[17]	HONG Tao, QIN Cheng-sen, LIN Wen-zhou. Numerical simulation of detonation in suspended mixed RDX and aluminum dust[J]. Explosion And Shock Waves, 2009, 29(5): 468-473. doi: 10.11883/1001-1455(2009)05-0468-06
[18]	WANG Bao-guo, CHEN Ya-fang, ZHANG Jing-lin, GAO Min. Preparation, characterization and performances of submicron -CL-20[J]. Explosion And Shock Waves, 2009, 29(5): 550-554. doi: 10.11883/1001-1455(2009)05-0550-05
[19]	WANG Bao-guo, ZHANG Jing-lin, WANG Zuo-shan, LIU Yu-cun, WANG Jian-hua. Influencing factors of the yield of diamond powder synthesised by detonation and explosion shock[J]. Explosion And Shock Waves, 2006, 26(5): 429-433. doi: 10.11883/1001-1455(2006)05-0429-05
[20]	HUANG Hui, JIANG Xiao-hua, HUANG Yi-min. Study on the detonation properties of extrusion cast explosives[J]. Explosion And Shock Waves, 2005, 25(1): 70-73. doi: 10.11883/1001-1455(2005)01-0070-04

Supplements(0)

Cited By

Cited by
Periodical cited type(1)
1. 周正青，杜泽晨，蒋慧灵，刘创，刘宇哲，周亮，巨圆圆. 铝含量对TNT/Al炸药爆轰反应区结构的影响. 南京理工大学学报. 2022(05): 523-528+543 .
Other cited types(2)