Lin Wenzhou, Hong Tao. Numerical simulation of friction sensitivity of high explosives[J]. Explosion And Shock Waves, 2016, 36(6): 745-751. doi: 10.11883/1001-1455(2016)06-0745-07
Citation:
Lin Wenzhou, Hong Tao. Numerical simulation of friction sensitivity of high explosives[J]. Explosion And Shock Waves, 2016, 36(6): 745-751. doi: 10.11883/1001-1455(2016)06-0745-07
Lin Wenzhou, Hong Tao. Numerical simulation of friction sensitivity of high explosives[J]. Explosion And Shock Waves, 2016, 36(6): 745-751. doi: 10.11883/1001-1455(2016)06-0745-07
Citation:
Lin Wenzhou, Hong Tao. Numerical simulation of friction sensitivity of high explosives[J]. Explosion And Shock Waves, 2016, 36(6): 745-751. doi: 10.11883/1001-1455(2016)06-0745-07
In order to study the explosive friction safety, a numerical simulation of high explosive friction sensitivity experiment was performed based on a melting friction model. The numerical results agree with the experiment results. The law of friction sensitivity was then analyzed based on the thermal decomposition rate. As the melting temperature is usually lower than the ignition temperature, a one-dimension numerical simulation of sensitivity experiment was conducted using a model that took account of melting, and the ignition times and melting results were obtained. The order of four explosives' ignition time including DATB, NQ, TATB and TNT meet agree with the experiment results, proving the applicability of the model. Furthermore, based on the order of the thermal decomposition rate, the numerical results have proved that, when the friction strength reaches certain degrees, the order of ignition time will change, which means that the sensitivity experiment cannot fully describe the order of the explosive sensitivity.
Asay B W. Shock wave science and technology reference library: Non-shock initiation of explosives[M]. Springer, 2010:537-554.
[2]
戴振东.摩擦体系热力学引论[M].北京:国防工业出版社, 2002:1-4.
[3]
Glenn J G, Foster J C, Gunger M. A test method and model to determine the thermal initiation properties of an energetic material in a low pressure long duration event[C]//Proceedings of Twelfth Symposium (International) on Detonation. San Diego, California, 2002: 299-307.
[4]
Birk A, Baker P, Kooker D E. Nondetonative explosions and burning of composition-B explosive[C]//Proceedings of Seventh twelfth Symposium (International) on Detonation. San Diego, California, 2002: 248-257.
[5]
Diens J K. A fractional hot-spot theory for peopellant sensitivity[C]//Proceedings of Second JANNAF Propulsion Syetems Hazards Meeting. China Lake, California, 1982: 200-208.
[6]
Hoffman D, Chandler J. Aspects of the tribology of the plastic bonded explosive LX-04[J]. Propellants, Explosives, Pyrotechnics, 2004, 29(6):368-373. doi: 10.1002/(ISSN)1521-4087
[7]
Wu Yanqing, Huang Fenglei. Frictional properties of explosive single crystals of HMX, RDX and PETN and a model of impact ignition by frictional heating[C]//Proceedings of Fourteenth Symposium (International) on Detonation. Coeur d'Alene, Idaho, 2010: 324-333.
Lin Wenzhou, Hong Tao. Theoretical analysis on friction sensitivity of high explosive[J]. Chinese Journal of Energetic Materials, 2007, 15(1):12-15. doi: 10.3969/j.issn.1006-9941.2007.01.004
[9]
林文洲.摩擦条件下的炸药热爆炸问题的研究[D].北京: 中国工程物理研究院研究生部, 2007.
[10]
董海山, 周芬芬.高能炸药及相关物性能[M].北京:科学出版社, 1989:107-109.
[11]
孙锦山, 朱建士.理论爆轰物理[M].北京:国防科技出版社, 1995:325-327.
[12]
陶文铨.数值传热学[M].西安:西安交通大学出版社, 1988:590-592.
[13]
Gibbs T R, Popolato A. LASL explosive property data[M]. USA: University of California Press, 1980:37-176.
[14]
Hirsehfelder J O, Curtis C F, Bird R B. Molecular theory of gases and liquids[M]. USA: University of Wisconsin Press, 1954:100-101.
DownLoad:
