Numerical simulation of influence of constrained layer on expanding deformation of metal cylindrical shell

Ren Guowu; Wen Shangjie; Zhang Ru; Guo Zhaoliang; Tang Tiegang

doi:10.11883/1001-1455(2017)06-0946-06

Volume 37 Issue 6

Sep. 2017

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2017 > 37(6): 946-951

Ren Guowu, Wen Shangjie, Zhang Ru, Guo Zhaoliang, Tang Tiegang. Numerical simulation of influence of constrained layer on expanding deformation of metal cylindrical shell[J]. Explosion And Shock Waves, 2017, 37(6): 946-951. doi: 10.11883/1001-1455(2017)06-0946-06

Citation:

Ren Guowu, Wen Shangjie, Zhang Ru, Guo Zhaoliang, Tang Tiegang. Numerical simulation of influence of constrained layer on expanding deformation of metal cylindrical shell[J]. Explosion And Shock Waves, 2017, 37(6): 946-951. doi: 10.11883/1001-1455(2017)06-0946-06

Citation:

Ren Guowu, Wen Shangjie, Zhang Ru, Guo Zhaoliang, Tang Tiegang. Numerical simulation of influence of constrained layer on expanding deformation of metal cylindrical shell[J]. Explosion And Shock Waves, 2017, 37(6): 946-951. doi: 10.11883/1001-1455(2017)06-0946-06

PDF( 4367 KB)

Numerical simulation of influence of constrained layer on expanding deformation of metal cylindrical shell

doi: 10.11883/1001-1455(2017)06-0946-06

Institute of Fluid Physics, China Academy of Engineering Physics,Mianyang 621999, Sichuan, China

Received Date: 2016-04-27
Rev Recd Date: 2017-01-22
Publish Date: 2017-11-25

Abstract

Abstract

In this work we investigated the influence of the constrained layer, composed of metal aluminum and polyurethane foam, on the expanding deformation of a metal cylindrical shell using numerical simulation, obtained the velocity and displacement profiles for 45 steel and aluminum affected by shock wave, and compared its simulated dynamic behaviors under the influence with those from the corresponding experiments performed using a high-speed framing camera and medium-energy X-ray photography and found them in good agreement. The findings obtained here provide a quantitative understanding of the constrained layer in terms of its influence on the expanding deformation of the metal cylindrical shell subjected to the high explosive loading.
- cylindrical shell,
- constrained layer,
- expanding deformation,
- X-ray

FullText(HTML)

References(14)

References

[1]	Gurnery R W.The initial velocity of fragment from bombs, shells and grenades[R].Army Ballistic Research Laboratory Report No.405, 1943.
[2]	Taylor G I.Analysis of the explosion of a long cylindrical bomb detonated at one end[M].Scientific Papers of G.I.Taylor, vol.Ⅲ.Cambridge: Cambridge University Press, 1963: 277-286.
[3]	Hoggatt R H, Recht R F.Fracture behavior of tubular bombs[J].Journal of Applied Physics, 1968, 93(3):1856-1862. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=5093397&contentType=Journals+%26+Magazines&sortType%3Dasc_p_Sequence%26filter%3DAND(p_IS_Number%3A5093320)%26pageNumber%3D4
[4]	Al-Hassani S T S, Johnson W.The dynamics of the fragmentation process for spherical shells containing explosives[J].International Journal of Mechanical Sciences, 1969, 11(10):811. doi: 10.1016/0020-7403(69)90034-4
[5]	Grady D E.Fragmentation of rings and shells:the Legacy of N.F.Mott[M].New York:Springer, 2006.
[6]	Grady D E, Olsen M L.A statistics and energy based theory of dynamic fragmentation[J].International Journal of Impact Engineering, 2003, 29(10):293-306. http://www.sciencedirect.com/science/article/pii/S0734743X03001325
[7]	Ivanov A G.Dynamic rupture of thin-walled cylindrical shells[J].Journal de Physique Ⅳ, 1991(C3):759-768. http://cn.bing.com/academic/profile?id=7165d9daa49b010d77104d3c893cbeec&encoded=0&v=paper_preview&mkt=zh-cn
[8]	Goto D M, Becker R, Orzechowski T J, et al.Investigation of the fracture and fragmenation of explosively driven rings and cylinders[J].International Journal of Impact Engineering, 2008, 35(12):1547-1556. doi: 10.1016/j.ijimpeng.2008.07.081
[9]	Zhang H, Ravi-Chandar K.On the dynamics of localization and fragmentation-Ⅳ:expansion of Al 6061-O tubes[J].International Journal of Fracture, 2010, 163(1/2):41-65. doi: 10.1007/s10704-009-9441-5
[10]	Bolis C, Counilh D, Lagrange J M, et al.Fragmentation of a titanium alloy shell in expansion:from experiments to simulation[J].Procedia Engineering, 2013, 58:672-677. doi: 10.1016/j.proeng.2013.05.077
[11]	汤铁钢, 谷岩, 李庆忠, 等.爆轰加载下金属柱壳膨胀破裂过程研究[J].爆炸与冲击, 2003, 23(6):529-533. doi: 10.3321/j.issn:1001-1455.2003.06.008 Tang Tiegang, Gu Yan, Li Qingzhong, et al.Expanding fracture of steel cylinder shell by detonation driving[J].Explosion and Shock Waves, 2003, 23(6):529-533. doi: 10.3321/j.issn:1001-1455.2003.06.008
[12]	陈马旭, 乐贵高.带泡沫缓冲的导弹跌落仿真[J].兵工自动化, 2014, 33(3):34-36. http://d.old.wanfangdata.com.cn/Periodical/bgzdh201403011 Chen Maxu, Le Guigao.Simulation of missile drop with foam cushions[J].Ordnance Industry Automation, 2014, 33(3):34-36. http://d.old.wanfangdata.com.cn/Periodical/bgzdh201403011
[13]	任国武, 郭昭亮, 张世文, 等.金属柱壳膨胀断裂的实验与数值模拟[J].爆炸与冲击, 2015, 35(6):895-900. http://www.bzycj.cn/CN/abstract/abstract9550.shtml Ren Guowu, Guo Zhaoliang, Zhang Shiwen, et al.Experiment and numerical simulation on expansion deformation and fracture of cylindrical shell[J].Explosion and Shock Waves, 2015, 35(6):895-900. http://www.bzycj.cn/CN/abstract/abstract9550.shtml
[14]	Dattelbaum D M, Robbins D L, Gustavsen R L, et al.Shock compression of polyurethane foams[J].EPJ Web of Conferences, 2012, 26:02014. doi: 10.1051/epjconf/20122602014

Relative Articles

[1]	ZHANG Suoshuo, NIE Jianxin, ZHANG Jian, SUN Xiaole, GUO Xueyong, ZHANG Tao. Sympathetic detonation of explosive charge in confined space and its protection[J]. Explosion And Shock Waves, 2023, 43(8): 085101. doi: 10.11883/bzycj-2022-0456
[2]	LI Manjiang, ZHAO Zhihao, DONG Xinlong, FU Yingqian, YU Xinlu, ZHOU Gangyi. Deformation and phase transformation of 20 steel cylinders driven by inner explosion[J]. Explosion And Shock Waves, 2023, 43(1): 013105. doi: 10.11883/bzycj-2022-0074
[3]	ZHANG Shiwen, JIN Shan, CHEN Yan, GUO Zhaoliang, DAN Jiakun, LIU Mingtao, TANG Tiegang. Influence of a cushion on dynamic expansion and fracture of an explosively-driven metallic cylinder[J]. Explosion And Shock Waves, 2022, 42(8): 083102. doi: 10.11883/bzycj-2021-0456
[4]	LI Yinglei, LIU Mingtao, CHEN Yan, ZHANG Shiwen, TANG Tiegang. Technologies for loading and diagnosis of expanding cylinder experiments with linearly-initiated explosives[J]. Explosion And Shock Waves, 2022, 42(12): 124101. doi: 10.11883/bzycj-2021-0484
[5]	WU Sisi, DONG Xinlong, YU Xinlu. An investigating on explosive expanding fracture of 45 steel cylinders by SPH method[J]. Explosion And Shock Waves, 2021, 41(10): 103101. doi: 10.11883/bzycj-2021-0172
[6]	ZHANG Shiwen, LONG Jianhua, JIA Hongzhi, LIU Cangli. Influence of cylindrical shell on spatial distribution of pressure during propagation of divergent shockwave[J]. Explosion And Shock Waves, 2018, 38(2): 345-352. doi: 10.11883/bzycj-2016-0214
[7]	Liu Wenxiang, Zhang Qingming, Zhong Fangping, Cheng Shuai, Zhang Dezhi. Strain growth of spherical shell subjected to internal blast loading during plastic response[J]. Explosion And Shock Waves, 2017, 37(5): 893-898. doi: 10.11883/1001-1455(2017)05-0893-06
[8]	Guo Zhaoliang, Ren Guowu, Zhang Shiwen, Tang Tiegang, Liu Cangli. Constitutive equation of expanding cylindrical shell at constant strain rate[J]. Explosion And Shock Waves, 2016, 36(5): 583-589. doi: 10.11883/1001-1455(2016)05-0583-07
[9]	Zhang Ke, Tang Zhi-ping. Experimental study of TiNi tubes under radial impact with and without lateral constraint[J]. Explosion And Shock Waves, 2015, 35(3): 296-303. doi: 10.11883/1001-1455-(2015)03-0296-08
[10]	Zhang Zhi-biao, Huang Feng-lei. The number of circumferential fragments of a cylindrical shell subjected to internal explosive loading[J]. Explosion And Shock Waves, 2015, 35(5): 763-767. doi: 10.11883/1001-1455(2015)05-0763-05
[11]	Ren Guo-wu, Guo Zhao-liang, Zhang Shi-wen, Tang Tie-gang, Jin Shan, Hu Hai-bo. Experiment and numerical simulation on expansion deformation and fracture of cylindrical shell[J]. Explosion And Shock Waves, 2015, 35(6): 895-900. doi: 10.11883/1001-1455(2015)06-0895-06
[12]	Liu Ming-tao, Tang Tie-gang, Hu Hai-bo, Li Qing-zhong, Hu Xiu-zhang, Li Yong-chi. Numerical studies of explosion induced cylindrical shell fractureunder different detonating modes[J]. Explosion And Shock Waves, 2014, 34(4): 415-420. doi: 10.11883/1001-1455(2014)04-0415-06
[13]	Tang Zhi-ping, Zhang Hui-jie. Radial impact responses of cylindrical shells with phase transformation[J]. Explosion And Shock Waves, 2013, 33(1): 47-53. doi: 10.11883/1001-1455(2013)01-0047-07
[14]	ZHOU Hong-qiang, ZHANG Feng-guo. Theplasticexpansionanddeformationofacylindershell[J]. Explosion And Shock Waves, 2012, 32(1): 91-96. doi: 10.11883/1001-1455(2012)01-0091-06
[15]	LI Xue-mei, WANG Xiao-song, WANG Peng-lai, LU Min, JIA Lu-feng. Spall of cylindrical copper by converging sliding detonation[J]. Explosion And Shock Waves, 2009, 29(2): 162-166. doi: 10.11883/1001-1455(2009)02-0162-05
[16]	TANG Tie-gang, LI Qing-zhong, SUN Xue-lin, SUN Zhan-feng, JIN Shan, GU Yan. Strain-rate effects of expanding fracture of 45 steel cylinder shells driven by detonation[J]. Explosion And Shock Waves, 2006, 26(2): 129-133. doi: 10.11883/1001-1455(2006)02-0129-05
[17]	LI Yong-chi, DONG Jie, HU Xiu-zhang, FAN Shu-qun. Imploding load induced deformation and spallation of thermal-plastic spherical shell of medium thickness[J]. Explosion And Shock Waves, 2005, 25(4): 319-324. doi: 10.11883/1001-1455(2005)04-0319-06
[18]	ZHANG Chong-yu, GU Yan, ZHANG Shi-wen, SUN Xue-lin, PENG Qi-xian. Study on expanding characteristic of steel tube driven by two head-on colliding detonation waves[J]. Explosion And Shock Waves, 2005, 25(3): 222-226. doi: 10.11883/1001-1455(2005)03-0222-05

Supplements(0)

Cited By

Cited by

Periodical cited type(3)

1.	杨智程，刘龙飞，刘炼煌，殷鹏志，吴志强. 外部爆炸载荷下表面粗糙度对45钢柱壳剪切带行为的影响. 高压物理学报. 2022(04): 114-126 .
2.	殷鹏志，刘龙飞，刘炼煌，杨涛. 海水腐蚀对薄壁钢管冲击膨胀断裂行为的影响. 兵器材料科学与工程. 2020(04): 12-17 .
3.	陈清畴，马弢，李勇. 爆炸箔起爆器作用机理研究进展. 含能材料. 2019(01): 79-88 .