Projectile target response model for normal penetration process based on mechanical vibration theory

CHENG Xiangli; ZHAO Hui; LI Linchuan; YE Haifu

doi:10.11883/bzycj-2018-0242

Volume 39 Issue 9

Sep. 2019

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2019 > 39(9): 093301

CHENG Xiangli, ZHAO Hui, LI Linchuan, YE Haifu. Projectile target response model for normal penetration process based on mechanical vibration theory[J]. Explosion And Shock Waves, 2019, 39(9): 093301. doi: 10.11883/bzycj-2018-0242

Citation:

CHENG Xiangli, ZHAO Hui, LI Linchuan, YE Haifu. Projectile target response model for normal penetration process based on mechanical vibration theory[J]. Explosion And Shock Waves, 2019, 39(9): 093301. doi: 10.11883/bzycj-2018-0242

Citation:

PDF( 1640 KB)

Projectile target response model for normal penetration process based on mechanical vibration theory

doi: 10.11883/bzycj-2018-0242

Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang 621999, Sichuan, China

Received Date: 2018-07-03
Rev Recd Date: 2018-09-08

Available Online: 2019-08-25

Publish Date: 2019-09-01

Abstract

Abstract

In order to provide exact mechanics input for anti-high-overload optimal design of penetration fuze, the mechanical vibration theory is introduced into theoretical analysis on normal penetration and a projectile target response model combining the rigid body motion with the first order axial vibration is proposed. On the basis of force analysis for normal penetration process, a rigid body motion model for projectile is built by adopting Newton second law. The first-order axial vibration model is built based on single DOF spring-mass-damper system. Then, numerical integration calculation is carried out and the trend of each physical variable in normal penetration process is obtained. To verify the credibility of the model proposed, artillery test is carried out and the acceleration signal in the penetration process is collected. Considering that the calculated values agree well with the experimental ones, it could be concluded that the model taking axial vibration effect into account is suitable to analyze force conditions, therefore, could be applied to guide the optimal design of penetration fuze.
- normal penetration,
- mechanical vibration,
- projectile target response model,
- spring-mass-damper system

FullText(HTML)

References(21)

References

[1]	李晓峰. 侵彻弹药引信技术 [M]. 北京: 国防工业出版社, 2016: 1−3.
[2]	王伟力, 黄雪峰, 杨雨潼. 半穿甲战斗部侵彻过程中装药安定性研究 [J]. 海军航空工程学院学报, 2010, 25(1): 79–82. DOI: 10.3969/j.issn.1673-1522.2010.01.019. WANG Weili, HUANG Xuefeng, YANG Yutong. Research on the grain safety during the penetration process of semi-armor-piercing warhead [J]. Journal of Naval Aeronautical and Astronautical University, 2010, 25(1): 79–82. DOI: 10.3969/j.issn.1673-1522.2010.01.019.
[3]	张建新. 侵彻引信炸点控制理论及试验研究 [D]. 南京: 南京理工大学, 2012: 1−2.
[4]	赵生伟, 初哲, 李明. 抗侵彻过载战斗部装药安定性实验研究 [J]. 兵工学报, 2010, 31(S1): 284–287. ZHAO Shengwei, CHU Zhe, LI Ming. Experiment investigation on stability of explosive in anti-overload warhead [J]. Acta Armamentarii, 2010, 31(S1): 284–287.
[5]	赵南, 王可慧, 李明, 等. 薄壁弹体高速侵彻钢筋混凝土实验研究 [J]. 实验力学, 2017, 32(4): 573–579. DOI: 10.7520/1001-4888-16-179. ZHAO Nan, WANG Kehui, LI Ming, et al. Experimental study of high speed penetration of thin-wall projectile in steel reinforced concreete [J]. Journal of Experimental Mechanics, 2017, 32(4): 573–579. DOI: 10.7520/1001-4888-16-179.
[6]	FORRESTAL M J, TZOU D Y. A spherical cavity-expansion penetration model for concrete targets [J]. International Journal of Solids and Structures, 1997, 34(31-32): 4127–4146. DOI: 10.1016/S0020-7683(97)00017-6.
[7]	BENDOR G, DUBINSKY A, ELPERIN T. Analytical solution for penetration by rigid conical impactors using cavity expansion models [J]. Mechanics Research Communications, 2000, 27(2): 185–189. DOI: 10.1016/S0093-6413(00)00080-X.
[8]	FORRESTAL M J, FREW D J, HICKERSON J P, et al. Penetration of concrete targets with deceleration-time measurements [J]. International Journal of Impact Engineering, 2003, 28(5): 479–497. DOI: 10.1016/S0734-743X(02)00108-2.
[9]	虞青俊, 李玉龙, 金连宝, 等. 侵彻多层混凝土目标弹丸过载特性研究 [J]. 探测与控制学报, 2007, 29(1): 13–17. DOI: 10.3969/j.issn.1008-1194.2007.01.004. YU Qingjun, LI Yulong, JIN Lianbao, et al. Research of deceleration-time curves during penetration of multi-plate concrete targets [J]. Journal of Detection & Control, 2007, 29(1): 13–17. DOI: 10.3969/j.issn.1008-1194.2007.01.004.
[10]	周栋, 吴俊斌. 动能战斗部侵彻混凝土力学响应研究 [J]. 战术导弹技术, 2012(4): 16–19. ZHOU Dong, WU Junbin. Research on penetrating concrete effective of kinetic warhead [J]. Tactical Missile Technology, 2012(4): 16–19.
[11]	徐文亮, 何春, 李朝君. 侵彻爆破型战斗部侵彻性能总体评估系统研究 [J]. 战术导弹技术, 2013(1): 93–100. XU Wenliang, HE Chun, LI Chaojun. General evaluation study of penetration warhead’s penetrate capability [J]. Tactical Missile Technology, 2013(1): 93–100.
[12]	皮爱国, 黄风雷. 大长细比结构弹体侵彻2024-O铝靶的弹塑性动力响应 [J]. 爆炸与冲击, 2008, 28(3): 252–260. DOI: 10.11883/1001-1455(2008)03-0252-09. PI Aiguo, HUANG Fenglei. Elastic-plastic dynamic response of slender projectiles penetrating into 2024-O aluminum targets [J]. Explosion and Shock Waves, 2008, 28(3): 252–260. DOI: 10.11883/1001-1455(2008)03-0252-09.
[13]	王琳, 王富耻, 王鲁, 等. 空心弹体垂直侵彻混凝土靶板的应变测试研究 [J]. 北京理工大学学报, 2002, 22(4): 453–456. DOI: 10.3969/j.issn.1001-0645.2002.04.014. WANG Lin, WANG Fuchi, WANG Lu, et al. Strain measurement in hollow projectiles impacting concrete targets [J]. Journal of Beijing Institute of Technology, 2002, 22(4): 453–456. DOI: 10.3969/j.issn.1001-0645.2002.04.014.
[14]	程兴旺, 王富耻, 王鲁, 等. 钨合金壳体侵彻混凝土靶板过程壳体应变的实验测试 [J]. 兵工学报, 2004, 25(1): 102–105. DOI: 10.3321/j.issn:1000-1093.2004.01.026. CHENG Xingwang, WANG Fuchi, WANG Lu, et al. Experimental study on the strain history of critical section during a normal penetration of tungsten alloy shell into a concrete target [J]. Acta Armamentarii, 2004, 25(1): 102–105. DOI: 10.3321/j.issn:1000-1093.2004.01.026.
[15]	韩学平, 芮筱亭, 王国平, 等. 基于小波的弹性弹丸膛内引信过载研究 [J]. 系统仿真学报, 2008, 20(13): 3496–3499. HAN Xueping, RUI Xiaoting, WANG Guoping, et al. Research of fuze overload in bore of flexibility pills based on wavelet method [J]. Journal of System Simulation, 2008, 20(13): 3496–3499.
[16]	陈学强, 闫明明, 徐晓辉, 等. 微加速度计在高冲击下的断裂失效分析 [J]. 仪表技术与传感器, 2014(2): 16–19. DOI: 10.3969/j.issn.1002-1841.2014.02.006. CHEN Xueqiang, YAN Mingming, XU Xiaohui, et al. Fracture failure analysis of micro-accelerometer under high impact [J]. Instrument Technique and Sensor, 2014(2): 16–19. DOI: 10.3969/j.issn.1002-1841.2014.02.006.
[17]	刘燕芳, 郭海波, 潘启智, 等. 多层陶瓷电容器的失效分析 [J]. 电子元件与材料, 2010, 29(11): 72–74. DOI: 10.3969/j.issn.1001-2028.2010.11.021. LIU Yanfang, GUO Haibo, PAN Qizhi, et al. Failure analysis of multi-layer ceramic capacitor [J]. Electronic Components and Materials, 2010, 29(11): 72–74. DOI: 10.3969/j.issn.1001-2028.2010.11.021.
[18]	何涛, 文鹤鸣. 靶体响应力函数的确定方法及其在侵彻力学中的应用 [J]. 中国科学技术大学学报, 2007, 37(10): 1249–1261. DOI: 10.3969/j.issn.0253-2778.2007.10.017. HE Tao, WEN Heming. Determination of the analytical forcing function of target response and its applications in penetration mechanics [J]. Journal of University of Science and Technology of China, 2007, 37(10): 1249–1261. DOI: 10.3969/j.issn.0253-2778.2007.10.017.
[19]	刘波, 杨黎明, 李东杰, 等. 侵彻弹体结构纵向振动频率特性分析 [J]. 爆炸与冲击, 2018, 38(3): 677–682. DOI: 10.11883/bzycj-2016-0282. LIU Bo, YANG Liming, LI Dongjie, et al. Analysis of axial vibration frequency for projectile structure in penetration [J]. Explosion and Shock Waves, 2018, 38(3): 677–682. DOI: 10.11883/bzycj-2016-0282.
[20]	罗梦翔, 刘涛, 蔡国平. 导弹振动的动力学建模和频率分析 [J]. 中国科技论文, 2015, 10(16): 1924–1927. DOI: 10.3969/j.issn.2095-2783.2015.16.012. LUO Mengxiang, LIU Tao, CAI Guoping. Dynamics modeling and frequency analysis of missile vibration [J]. China Science Paper, 2015, 10(16): 1924–1927. DOI: 10.3969/j.issn.2095-2783.2015.16.012.
[21]	季文美. 机械振动 [M].北京: 科学出版社, 2016: 68−69.

Relative Articles

[1]	FENG XiaoWei, LI Juncheng, LU Yonggang, WANG Shouqian, LU Zhengcao, LIU Chuang, FU Dan. Characteristics of high-mass tungsten alloy kinetic projectile penetrating ultra-high strength steel targets at high velocity[J]. Explosion And Shock Waves, 2023, 43(9): 091410. doi: 10.11883/bzycj-2023-0016
[2]	HONG Zhijie, YANG Yaozong, KONG Xiangzhen, FANG Qin. Practical engineering calculation models for rigid projectile penetrating and perforating into concrete target[J]. Explosion And Shock Waves, 2023, 43(8): 083302. doi: 10.11883/bzycj-2022-0482
[3]	LIU Junwei, ZHANG Xianfeng, LIU Chuang, CHEN Haihua, WANG Jipeng, XIONG Wei. Study on mass erosion model of projectile penetrating concrete at high speed considering variation of friction coefficient[J]. Explosion And Shock Waves, 2021, 41(8): 083301. doi: 10.11883/bzycj-2020-0250
[4]	TANG Kui, WANG Jinxiang, CHEN Xingwang, LI Yuanbo, PENG Chucai. Penetration characteristics of jacketed rods into semi-infinite steel targets[J]. Explosion And Shock Waves, 2020, 40(5): 053302. doi: 10.11883/bzycj-2019-0323
[5]	LIU Yongyou, YANG Huawei, ZHANG Jie, WANG Zhiyong, WANG Zhihua. A resistance model for a rigid flat projectile penetrating a reinforced concrete target[J]. Explosion And Shock Waves, 2020, 40(3): 033301. doi: 10.11883/bzycj-2018-0389
[6]	WU Qunbiao, SHEN Peihui, FANG Haifeng, FAN Jihua, CAI Lihua. Simplified model of pre-composited rod's normal penetration into steel target[J]. Explosion And Shock Waves, 2019, 39(1): 013302. doi: 10.11883/bzycj-2017-0287
[7]	XING Boyang, LIU Rongzhong, ZHANG Dongjiang, CHEN Liang, HOU Yunhui, GUO Rui. A mass model for behind-armor debris generated by normal penetration of a variable cross-section explosively-formed projectile into an armor steel plate[J]. Explosion And Shock Waves, 2019, 39(7): 074202. doi: 10.11883/bzycj-2018-0187
[8]	CHENG Xiangli, ZHAO Hui, JIAO Min, YE Haifu, LI Linchuan. Dynamic response characteristics of the protection system for a projectile-borne recorder under high impact loading[J]. Explosion And Shock Waves, 2019, 39(12): 125102. doi: 10.11883/bzycj-2018-0418
[9]	DENG Yongjun, SONG Wenjie, CHEN Xiaowei, YAO Yong. A dynamic cavity-expansion penetration model of compressible elastic-plastic response for reinforced concrete targets[J]. Explosion And Shock Waves, 2018, 38(5): 1023-1030. doi: 10.11883/bzycj-2017-0043
[10]	WANG Wenjie, ZHANG Xianfeng, DENG Jiajie, ZHENG Yingmin, LIU Chuang. Analysis of projectile penetrating into mortar target with elliptical cross-section[J]. Explosion And Shock Waves, 2018, 38(1): 164-173. doi: 10.11883/bzycj-2017-0020
[11]	LI Rui, HUANG Zhengxiang, ZU Xudong, XIAO Qiangqiang, JIA Xin. Spallation of targets subjected to vertical penetraion of explosively-formed projectiles[J]. Explosion And Shock Waves, 2018, 38(5): 1039-1044. doi: 10.11883/bzycj-2017-0055
[12]	Wang Bin, Cao Ren-yi, Tan Duo-wang. Experimental study on penetration of reinforced concrete by a high-speed penetrator with large mass[J]. Explosion And Shock Waves, 2013, 33(1): 98-102. doi: 10.11883/1001-1455(2013)01-0098-05
[13]	HE Li-ling, CHEN Xiao-wei, FAN Ying. Metallographicobservationofreduced-scaleadvancedEPW afterhigh-speedpenetration[J]. Explosion And Shock Waves, 2012, 32(5): 515-522. doi: 10.11883/1001-1455(2012)05-0515-08
[14]	LI Ji-cheng, CHEN Xiao-wei. Comparison among depths of penetration of different targets subjected to rigid projectile impact[J]. Explosion And Shock Waves, 2009, 29(3): 225-230. doi: 10.11883/1001-1455(2009)03-0225-06
[15]	ZHU Jian-sheng, ZHAO Guo-zhi, DU Zhong-hua, WANG Xian-zhi. Mechanism of PELE projectiles perpendicularly impacting on thin target plates[J]. Explosion And Shock Waves, 2009, 29(3): 281-288. doi: 10.11883/1001-1455(2009)03-0281-08
[16]	WANG Feng, WANG Xiao-jun, HU Xiu-zhang1, LIU Wen-tao. Oblique penetration of an ogive-nosed rod into the aluminum target[J]. Explosion And Shock Waves, 2005, 25(3): 265-270. doi: 10.11883/1001-1455(2005)03-0265-06

Supplements(0)

Cited By

Cited by

Periodical cited type(10)

1.	梁君，范宣华，肖世富，陈红永，鄂林仲阳. 弹体结构局部响应放大的现象研究. 科学技术与工程. 2024(02): 557-565 .
2.	刘波，程祥利，杨荷，赵慧，吴学星，刘涛. 基于弹-靶参数匹配的侵彻多层目标引信载荷特性分析. 兵工学报. 2024(07): 2240-2250 .
3.	赵慧，程祥利，刘军，刘波，吴学星. 侵彻战斗部-引信宽频域加载特性. 兵工学报. 2024(10): 3696-3705 .
4.	王卿硕，郭磊，高洪寅，何源，王传婷，陈鹏翔，何勇. 梯度弹体结构轴向振动仿真研究. 兵工学报. 2024(S1): 191-199 .
5.	刘伟钊，李蓉，牛兰杰，施坤林. 硬目标侵彻起爆控制技术研究现状及展望. 兵工学报. 2023(06): 1602-1619 .
6.	李飞胤，马少杰，张合. 连续高冲击试验装置动态作用过程仿真研究. 兵器装备工程学报. 2022(01): 255-259 .
7.	邱云潇，何丽灵，陈刚，吴昊，李继承. 压装连接对加速度计层间信号粘连的影响. 高压物理学报. 2022(04): 43-54 .
8.	马孟新，牛兰杰，李蓉，孙亚杰. 基于侵彻过载信号应力波补偿的靶后精确起爆控制技术. 探测与控制学报. 2022(05): 31-38 .
9.	青泽，牟东，廉璞，刘军，周铭. 侵彻姿态测量中MEMS陀螺仪结构仿真与冲击实验. 微纳电子技术. 2021(09): 812-817 .
10.	张美云，石庚辰，刘强，张力，邱强强. 侵彻硬目标引信侵彻信号获取与处理技术. 制导与引信. 2020(03): 1-10+24 .