Failure mechanism and dynamic response of a composite lattice structure under intense explosion loadings

SHI Shengbo; WANG Renzhi; TANG Jiabin; GAN Yundan; YUAN Jianfei; CHEN Yong

doi:10.11883/bzycj-2022-0430

Volume 43 Issue 6

Jun. 2023

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2023 > 43(6): 062201

SHI Shengbo, WANG Renzhi, TANG Jiabin, GAN Yundan, YUAN Jianfei, CHEN Yong. Failure mechanism and dynamic response of a composite lattice structure under intense explosion loadings[J]. Explosion And Shock Waves, 2023, 43(6): 062201. doi: 10.11883/bzycj-2022-0430

Citation:

SHI Shengbo, WANG Renzhi, TANG Jiabin, GAN Yundan, YUAN Jianfei, CHEN Yong. Failure mechanism and dynamic response of a composite lattice structure under intense explosion loadings[J]. Explosion And Shock Waves, 2023, 43(6): 062201. doi: 10.11883/bzycj-2022-0430

Citation:

SHI Shengbo, WANG Renzhi, TANG Jiabin, GAN Yundan, YUAN Jianfei, CHEN Yong. Failure mechanism and dynamic response of a composite lattice structure under intense explosion loadings[J]. Explosion And Shock Waves, 2023, 43(6): 062201. doi: 10.11883/bzycj-2022-0430

PDF( 7832 KB)

Failure mechanism and dynamic response of a composite lattice structure under intense explosion loadings

doi: 10.11883/bzycj-2022-0430

1.
Shaanxi Aerospace Flight Vehicle Design Key Laboratory, School of Astronautics, Northwestern Polytechnical University, Xi’an 710072, Shaanxi, China
2.
Beijing Institute of Aerospace Systems Engineering, Beijing 100076, China
3.
Xi’an Modern Chemistry Research Institute, Xi’an 710065, Shaanxi, China
4.
Automobile Engineering Institute, Chongqing University of Technology, Chongqing 400054, China

Received Date: 2022-10-07
Rev Recd Date: 2023-04-10

Available Online: 2023-04-26

Publish Date: 2023-06-05

Abstract

Abstract

In order to comply with the requirements of explosive shock wave protection for the new generation of equipment structures, it is necessary to design a lightweight, high energy absorption ratio structure and further systematically understand its dynamic responses under explosion loadings. A composite lattice sandwich structure with pyramidal truss core was designed, which consisting of carbon fiber reinforced composite panels and metal cores. The explosion experiments were carried out. The failure mechanism and damage mode of this composite lattice structure under intense explosion shock loadings were analyzed. Based on the failure mechanism in mesoscale of the material, both the three-dimensional progressive damage model of the composite panels and the Johnson-Cook damage model of the metal cores were constructed. By combining with the finite element method, a numerical model for predicting explosion shock response of the composite lattice structure was developed. Both the bonding properties between layers of the composite panels, and the performances of the adhesive layer between the panels and the cores were considered in the numerical model. The initial damage criterion based on strain description was established, and the damage dynamic evolution equations corresponding to different damage modes were given. A damage variable was introduced to characterize the attenuation degree of stiffness properties of the damaged elements. Furthermore, the stress of damaged elements could be obtained. The dynamic responses of this structure under different loadings were analyzed using the developed model. The main mechanisms influencing the explosion protection properties of the composite lattice structure were discussed based on both simulated and experimental results. It is revealed that the local failures occur when the composite lattice structure is exposed and close to explosion loadings. The main failure modes are the debonding between the composite panels and the pyramidal truss cores in the edge area, and the fracture of local struts. However, the overall configuration of this composite lattice sandwich structure is basically intact and it still has a good carrying capacities. The damage function considering various variables of load conditions and structural parameters was discussed. The feasible domain for this structure design was given. These research results can provide theoretical basis and technical support for the designing and safety evaluation of lightweight, explosion protection structure of key equipment components.
- explosion shock protection,
- composite lattice structure,
- progressive damage model,
- dynamic response,
- damage function

FullText(HTML)

References(25)

References

[1]	金键, 朱锡, 侯海量, 等. 大型舰船在水下接触爆炸下的毁伤与防护研究综述 [J]. 爆炸与冲击, 2020, 40(11): 111401. DOI: 10.11883/bzycj-2020-0105. JIN J, ZHU X, HOU H L, et al. Review on damage and protection of large ships under underwater contact explosion [J]. Explosion and Shock Waves, 2020, 40(11): 111401. DOI: 10.11883/bzycj-2020-0105.
[2]	张军, 黄含军, 王军评, 等. 炸药驱动式爆炸管的载荷计算 [J]. 装备环境工程, 2021, 18(5): 21–27. DOI: 10.7643/issn.1672-9242.2021.05.004. ZHANG J, HUANG H J, WANG J P, et al. Load calculation of explosive driven explosive tube [J]. Equipment Environment Engineering, 2021, 18(5): 21–27. DOI: 10.7643/issn.1672-9242.2021.05.004.
[3]	马福临, 杨娜娜, 赵天佑, 等. 冲击波-破片群联合作用下舰船复合材料结构近场动力学损伤模拟 [J]. 爆炸与冲击, 2022, 42(3): 033304. DOI: 10.11883/bzycj-2021-0080. MA F L, YANG N N, ZHAO T Y, et al. Near field dynamic damage simulation of ship composite structure under the combined action of shock wave and fragment group [J]. Explosion and Shock Waves, 2022, 42(3): 033304. DOI: 10.11883/bzycj-2021-0080.
[4]	王志鹏, 李海波, 韦冰峰, 等. 嵌锁式CFRP方形蜂窝夹芯梁低速冲击响应及失效机理[J] [J]. 爆炸与冲击, 2022, 42(7): 073102. DOI: 10.11883/bzycj-2021-0525. WANG Z P, LI H B, WEI B F, et al. Low-velocity impact response and failure mechanism of CFRP sandwich beams with a square honeycomb core fabricated by the interlocking method [J]. Explosion and Shock Waves, 2022, 42(7): 073102. DOI: 10.11883/bzycj-2021-0525.
[5]	陈东, 吴永鹏, 李忠盛, 等. 轻质高强多功能点阵夹层结构研究进展 [J]. 装备环境工程, 2020, 17(4): 77–84. DOI: 10.7643/issn.1672-9242.2020.04.013. CHEN D, WU Y P, LI Z S, et al. Research progress of light, high strength and multi-function lattice sandwich structures [J]. Equipment Environment Engineering, 2020, 17(4): 77–84. DOI: 10.7643/issn.1672-9242.2020.04.013.
[6]	孙晓旺, 陶晓晓, 王显会, 等. 负泊松比蜂窝材料抗爆炸特性及优化设计研究 [J]. 爆炸与冲击, 2020, 40(9): 095101. DOI: 10.11883/bzycj-2020-0011. SUN X W, TAO X X, WANG X H, et al. Study on anti-explosion characteristics and optimum design of honeycomb material with negative Poisson’s ratio [J]. Explosion and Shock Waves, 2020, 40(9): 095101. DOI: 10.11883/bzycj-2020-0011.
[7]	吴艳青, 刘彦, 黄风雷, 等. 爆炸力学理论及应用[M]. 1版. 北京: 北京理工大学出版社, 2021: 1–20.
[8]	程帅, 刘文祥, 童念雪, 等. 爆炸载荷下飞机典型加筋结构毁伤特性 [J]. 爆炸与冲击, 2021, 41(1): 013302. DOI: 10.11883/bzycj-2020-0077. CHENG S, LIU W X, TONG N X, et al. Damage characteristics of typical stiffened aircraft structures under explosive loads [J]. Explosion and Shock Waves, 2021, 41(1): 013302. DOI: 10.11883/bzycj-2020-0077.
[9]	WU Q Q, GAO Y, XIONG J. Quasi-static mechanical properties of composite lattice sandwich structures with enhanced face panels [J]. European Journal of Mechanics: A/Solids, 2023, 97: 104808. DOI: 10.1016/j.euromechsol.2022.104808.
[10]	EVANS A G, HUTCHINSON J W, FLECK N A, et al. The topological design of multifunctional cellular metals [J]. Progress in Materials Science, 2001, 46(3/4): 309–327. DOI: 10.1016/S0079-6425(00)00016-5.
[11]	LI X, WANG Z H, ZHU F, et al. Response of aluminium corrugated sandwich panels under air blast loadings: experiment and numerical simulation [J]. International Journal of Impact Engineering, 2014, 65: 79–88. DOI: 10.1016/j.ijimpeng.2013.11.002.
[12]	QI C, YANG S, YANG L J, et al. Blast resistance and multi-objective optimization of aluminum foam-cored sandwich panels [J]. Composite Structures, 2013, 105: 45–57. DOI: 10.1016/j.compstruct.2013.04.043.
[13]	王涛, 余文力, 秦庆华, 等. 爆炸载荷下泡沫铝夹芯板变形与破坏模式的实验研究 [J]. 兵工学报, 2016, 37(8): 1456–1463. DOI: 10.3969/j.issn.1000-1093.2016.08.017. WANG T, YU W L, QIN Q H, et al. Experimental investigation into deformation and damage patterns of sandwich plates with aluminum foam core subjected to blast loading [J]. Acta Armamentarii, 2016, 37(8): 1456–1463. DOI: 10.3969/j.issn.1000-1093.2016.08.017.
[14]	YUNGWIRTH C J, WADLEY H N G, O’CONNOR J H, et al. Impact response of sandwich plates with a pyramidal lattice core [J]. International Journal of Impact Engineering, 2008, 35(8): 920–936. DOI: 10.1016/j.ijimpeng.2007.07.001.
[15]	WADLEY H, DHARMASENA K, CHEN Y, et al. Compressive response of multilayered pyramidal lattices during underwater shock loading [J]. International Journal of Impact Engineering, 2008, 35(9): 1102–1114. DOI: 10.1016/j.ijimpeng.2007.06.009.
[16]	DHARMASENA K P, WADLEY H N G, LIU T, et al. The dynamic response of edge clamped plates loaded by spherically expanding sand shells [J]. International Journal of Impact Engineering, 2013, 62: 182–195. DOI: 10.1016/j.ijimpeng.2013.06.012.
[17]	亓昌, 郝鹏程, 舒剑, 等. 金字塔型点阵材料夹芯板抗爆性能仿真与优化 [J]. 振动与冲击, 2019, 38(16): 245–252. DOI: 10.13465/j.cnki.jvs.2019.16.035. QI C, HAO P C, SHU J, et al. Simulation and optimization for blast-resistant performances of pyramidal lattice cored sandwich panels [J]. Journal of Vibration and Shock, 2019, 38(16): 245–252. DOI: 10.13465/j.cnki.jvs.2019.16.035.
[18]	彭航. 侵爆战斗部对典型建筑物内爆毁伤效应与评估方法研究[D]. 南京: 南京理工大学, 2021. DOI: 10.27241/d.cnki.gnjgu.2021.000774. PENG H. Study on damage effect and evaluation method of penetration warhead on typical building internal explosion [D]. Nanjing, Jiangsu, China: Nanjing University of Science and Technology, 2021. DOI: 10.27241/d.cnki.gnjgu.2021.000774.
[19]	冯晓伟, 卢永刚, 李永泽. 飞机目标在爆炸冲击波作用下的毁伤效应评估方法 [J]. 高压物理学报, 2019, 33(4): 045101. DOI: 10.11858/gywlxb.20180687. FENG X W, LU YG, LI Y Z. Damage effect evaluation method of aircraft target under explosion shock wave [J]. Chinese Journal of High Pressure Physics, 2019, 33(4): 045101. DOI: 10.11858/gywlxb.20180687.
[20]	HAN L, HAN Q, GE Y X, et al. Vulnerability assessment of combat aircraft to blast loading [J]. Proceedings of the Institution of Mechanical Engineers, 2019, 233(2): 604–615. DOI: 10.1177/0954410017740162.
[21]	胡榕,姜春兰,卢广照,等. 机场跑道内爆炸毁伤效应及工程化函数模型 [J]. 兵工学报, 2023, 44(4): 929–939. DOI: 10.12382/bgxb.2022.1220. HU R, JIANG C L, LU G Z, et al. Explosion damage effect and engineering function model in airport runway [J]. Acta Armamentarii, 2023, 44(4): 929–939. DOI: 10.12382/bgxb.2022.1220.
[22]	WEI X Y, XIONG J, WANG J, et al. New advances in fiber-reinforced composite honeycomb materials [J]. Science China Technological Sciences, 2020, 63(8): 1348–1370. DOI: 10.1007/s11431-020-1650-9.
[23]	LI Z B, GAO Y, WEI X Y, et al. Fabrication and failure mechanisms of all-composite honeycomb sandwich cylinder under the axial compression [J]. Composites Part A: Applied Science and Manufacturing, 2022, 161: 107075. DOI: 10.1016/j.compositesa.2022.107075.
[24]	ZHAO H N, FANG H Y, ZHAO X H. Experimental and numerical investigation on dynamic behaviors of glass fiber reinforced polymer plates under explosion loadings [J]. International Journal of Impact Engineering, 2023, 171: 104362. DOI: 10.1016/j.ijimpeng.2022.104362.
[25]	李伟, 王鹏, 李佳, 等. 高速冲击下多胞材料细观结构中波传播规律 [J]. 装备环境工程, 2021, 18(5): 87–93. DOI: 10.7643/issn.1672-9242.2021.05.013. LI W, WANG P, LI J, et al. Wave propagation in mesostructure of multicellular materials under high speed impact [J]. Equipment Environment Engineering, 2021, 18(5): 87–93. DOI: 10.7643/issn.1672-9242.2021.05.013.

Relative Articles

[1]	ZHOU Nan, TANG Kui, SUN Jiahui, WANG Jinxiang, LIU Dabin, FANG Yu. Damage characteristics of foamed aluminum/fiber sandwich structure under the combined loading of near-field blast shock wave and fragments[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2024-0128
[2]	ZHAO Zhujie, HOU Hailiang, WU Xiaowei, LI Yongqing, LI Dian, JIANG Anbang. A review of the dynamic response and protection mechanism of liquid filled structures under impact loads[J]. Explosion And Shock Waves, 2024, 44(5): 051101. doi: 10.11883/bzycj-2023-0328
[3]	CHEN Yang, WANG Zhaoxi, ZHAI Shihui, SHENG Peng, WANG Zhelan, ZHU Mingliang. Peridynamic simulation of impact damage to 3D printedlattice sandwich structure[J]. Explosion And Shock Waves, 2024, 44(3): 033101. doi: 10.11883/bzycj-2023-0124
[4]	DAI Quan, LI Xiangdong, ZHOU Lanwei, JI Yangziyi. An assessment method for ammunition damage effectiveness based on multiple rectangular cookie cutter function[J]. Explosion And Shock Waves, 2024, 44(3): 031404. doi: 10.11883/bzycj-2023-0316
[5]	WEI Jianhui, LI Xu, HUANG Wei, XU Hongjian, FANG Bopeng. Dynamic response and failure of sandwich beams with graded metal foam core under high-velocity impact[J]. Explosion And Shock Waves, 2023, 43(5): 053301. doi: 10.11883/bzycj-2022-0156
[6]	WANG Zhi, CHANG Lijun, HUANG Xingyuan, CAI Zhihua. Simulation on the defending effect of composite structure of body armor under the combined action of blast wave and fragments[J]. Explosion And Shock Waves, 2023, 43(6): 063202. doi: 10.11883/bzycj-2022-0515
[7]	ZHAO Haonan, FANG Hongyuan, ZHAO Xiaohua, WANG Gaohui. Analysis on the blast resistance of polymer composite slabs under contact explosions[J]. Explosion And Shock Waves, 2023, 43(5): 052201. doi: 10.11883/bzycj-2022-0161
[8]	LI Zhiyang, LEI Jianyin, LIU Zhifang. Dynamic response of nacre-like structure under explosion load[J]. Explosion And Shock Waves, 2022, 42(8): 083101. doi: 10.11883/bzycj-2022-0145
[9]	ZHANG Xinyue, HUI Xulong, GE Yujing, SHU Wan, BAI Chunyu, LIU Xiaochuan. Energy absorption characteristics and failure analysis of composite thin-walled structures with different cross-sectional configurations under medium- and low-speed compression loading[J]. Explosion And Shock Waves, 2022, 42(6): 063102. doi: 10.11883/bzycj-2021-0347
[10]	CHENG Shuai, LIU Wenxiang, TONG Nianxue, YIN Wenjun, SHI Yingju, ZHANG Dezhi. Damage mechanism of typical stiffened aircraft structures under explosive loading[J]. Explosion And Shock Waves, 2021, 41(1): 013302. doi: 10.11883/bzycj-2020-0077
[11]	LI Mao, GAO Shengzhi, HOU Hailiang, LI Dian, LI Yongqing, ZHU Xi. Damage characteristics of polyurea coated ceramic/steel composite armor structures subjected to combined loadings of blast and high-velocity fragments[J]. Explosion And Shock Waves, 2020, 40(11): 111403. doi: 10.11883/bzycj-2019-0119
[12]	LI Dian, HOU Hailiang, ZHU Xi, CHEN Changhai, LI Mao. A theoretical model for the evaluation of protective capability of a sandwich bulkhead structure in the close range of warhead explosion[J]. Explosion And Shock Waves, 2019, 39(2): 022201. doi: 10.11883/bzycj-2017-0351
[13]	Ye Nan, Zhang Wei, Huang Wei, Li Dacheng, Gao Yubo, Xie Wenbo. Dynamic response and failure mode of PVC sandwich plates subjected to impact loading[J]. Explosion And Shock Waves, 2017, 37(1): 37-45. doi: 10.11883/1001-1455(2017)01-0037-09
[14]	Chen Pengyu, Hou Hailiang, Wu Linjie, Zhu Xi. Analysis of the damage load of the underwater contact explosion on multi-layered defend cabins[J]. Explosion And Shock Waves, 2017, 37(2): 283-290. doi: 10.11883/1001-1455(2017)02-0283-08
[15]	Hou Hai-liang, Zhang Cheng-liang, Li Mao, Hu Nian-ming, Zhu Xi. Damage characteristics of sandwich bulkhead under the impact of shock and high-velocity fragments[J]. Explosion And Shock Waves, 2015, 35(1): 116-123. doi: 10.11883/1001-1455(2015)01-0116-08
[16]	Zhang Zhen-hua, Qian Hai-feng, Wang Yuan-xin, Mou Jin-lei, Mei Zhi-yuan, Niu Chuang. Experiment of dynamic response of multilayered pyramidal lattices during ball hammer collision loading[J]. Explosion And Shock Waves, 2015, 35(6): 888-894. doi: 10.11883/1001-1455(2015)06-0888-07
[17]	ZHANG Xiao-peng, GE Fei, XING Huai-nian, JIN Li-qiang. Dynamicstressmeasurementofalargeexplosion-containmentvessel[J]. Explosion And Shock Waves, 2010, 30(1): 101-104. doi: 10.11883/1001-1455(2010)01-0101-04

Supplements(0)

Cited By

Cited by

Periodical cited type(3)

1.	陈洋，王肇喜，翟师慧，盛鹏，王者蓝，朱明亮. 3D打印点阵夹芯结构冲击损伤的近场动力学模拟. 爆炸与冲击. 2024(03): 146-160 . 本站查看
2.	黄斌，范启东，梁剑烽. 薄壁仿生护具微冲击响应智能预测方法仿真. 计算机仿真. 2024(10): 438-442 .
3.	陈清华，吕可，王德俊，王建刚，王建业，冯鹏. 爆炸载荷下实验舱功能梯度防爆结构的性能. 中国机械工程. 2023(21): 2568-2576 .