A study on dynamic mechanical properties of Al<sub>0.3</sub>CoCrFeNi high-entropy alloy considering crystal orientation

CHEN Jialin; LI Shutao; CHEN Yeqing

doi:10.11883/bzycj-2023-0324

Volume 44 Issue 3

Mar. 2024

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2024 > 44(3): 031401

WU Xu-tao, HU Shi-sheng, CHEN De-xing, YU Ze-qing. Impact compression experiment of steel fiber reinforced high strength concrete[J]. Explosion And Shock Waves, 2005, 25(2): 125-131. doi: 10.11883/1001-1455(2005)02-0125-07

Citation:

CHEN Jialin, LI Shutao, CHEN Yeqing. A study on dynamic mechanical properties of Al_0.3CoCrFeNi high-entropy alloy considering crystal orientation[J]. Explosion And Shock Waves, 2024, 44(3): 031401. doi: 10.11883/bzycj-2023-0324

Citation:

PDF( 42071 KB)

A study on dynamic mechanical properties of Al_0.3CoCrFeNi high-entropy alloy considering crystal orientation

doi: 10.11883/bzycj-2023-0324

Institute of Defense Engineering, AMS, PLA, Beijing 100036, China

Received Date: 2023-09-07
Rev Recd Date: 2023-11-23

Available Online: 2023-11-24

Publish Date: 2024-03-14

Abstract

Abstract

High-entropy alloy (HEA) materials exhibit different failure modes and mechanical properties under high strain rate dynamic response. Because its potential mechanism cannot be fully explained from a macro perspective, it is necessary to study the atomic structure change, dislocation distribution change, evolution mechanism and deformation mechanism in the dynamic response process from a microscopic perspective. This study provides a reference for optimizing the processing technology and preparation method of HEA protective materials. The molecular dynamics simulation is adopted to design the compression, tensile at different strain rates and impact tests of [110], [111] and [100] three oriented Al_0.3CoCrFeNi HEA. The atomic structure changes, dislocation distribution change, evolution mechanism and deformation mechanism in the dynamic response process are then analyzed. In the compression test: the yield strength of Al_0.3CoCrFeNi high-entropy alloy with [110] orientation structure is the highest, followed by [111] and [100]. The main deformation mechanism of the [100] orientation structure is twin deformation, [110] orientation structure is slip deformation, and [111] orientation structure is dislocation deformation. In the tensile test: the yield strength of Al_0.3CoCrFeNi high-entropy alloy with [111] orientation structure is the highest, followed by [100] and [110]. [100] orientation structure presents more twin structure during the tensile process; [110] exhibits more regular hexagonal close-packed structure slip surface; while [111] does not produce any slip surface. With the increase of strain rate, the compressive and tensile yield strength increased greatly, and the corresponding elongation increased, too. The plastic deformation mechanism at low strain rate (1×10⁹ s⁻¹) is mainly slip deformation, but the number of slip systems is small. The plastic deformation mechanism at medium strain rate (1×10¹⁰ s⁻¹) is mainly slip deformation mechanism, but many slip systems appear. The plastic deformation mechanism at high strain rate (1×10¹¹ s⁻¹) is induced by amorphous atoms with disordered atomic arrangement. The Al_0.3CoCrFeNi high-entropy alloy with [110] orientation structure has the best impact resistance, which is attributed to its highest yield strength and the highest stress at the end of the yield stage.
- crystal orientation,
- high-entropy alloy,
- deformation mechanism,
- microstructure evolution,
- molecular dynamics

FullText(HTML)

References(64)

References

[1]	CHENG J C, ZHANG S, LIU Q, et al. Ballistic impact experiments and modeling on impact cratering, deformation and damage of 2024-T4 aluminum alloy [J]. International Journal of Mechanical Sciences, 2022, 224: 107312. DOI: 10.1016/j.ijmecsci.2022.107312.
[2]	RANAWEERA P, BAMBACH M R, WEERASINGHE D, et al. Ballistic impact response of monolithic steel and tri-metallic steel-titanium-aluminium armour to nonrigid NATO FMJ M80 projectiles [J]. Thin-Walled Structures, 2023, 182: 110200. DOI: 10.1016/j.tws.2022.110200.
[3]	LI L, ZHANG Q C, LU T J. Ballistic penetration of deforming metallic plates: experimental and numerical investigation [J]. International Journal of Impact Engineering, 2022, 170: 104359. DOI: 10.1016/j.ijimpeng.2022.104359.
[4]	DUBEY R, JAYAGANTHAN R, RUAN D, et al. Ballistic perforation and penetration of 6xxx-series aluminium alloys: A review [J]. International Journal of Impact Engineering, 2023, 172: 104426. DOI: 10.1016/j.ijimpeng.2022.104426.
[5]	FAIDZI M K, ABDULLAH S, ABDULLAH M F, et al. Computational analysis on the different core configurations for metal sandwich panel under high velocity impact [J]. Soft Computing, 2021, 25(16): 10561–10574. DOI: 10.1007/s00500-021-06015-6.
[6]	LIU J, ZHENG B L, ZHANG K, et al. Ballistic performance and energy absorption characteristics of thin nickel-based alloy plates at elevated temperatures [J]. International Journal of Impact Engineering, 2019, 126: 160–171. DOI: 10.1016/j.ijimpeng.2018.12.012.
[7]	REN J, XU Y X, LIU J X, et al. Effect of strength and ductility on anti-penetration performance of low-carbon alloy steel against blunt-nosed cylindrical projectiles [J]. Materials Science and Engineering: A, 2017, 682: 312–322. DOI: 10.1016/j.msea.2016.11.012.
[8]	DENG Y F, HU A, XIAO X K, et al. Experimental and numerical investigation on the ballistic resistance of ZK61m magnesium alloy plates struck by blunt and ogival projectiles [J]. International Journal of Impact Engineering, 2021, 158: 104021. DOI: 10.1016/j.ijimpeng.2021.104021.
[9]	CHOUDHURI D, JANNOTTI P A, MUSKERI S, et al. Ballistic response of a FCC-B2 eutectic AlCoCrFeNi_2.1 high entropy alloy [J]. Journal of Dynamic Behavior of Materials, 2019, 5(4): 495–503. DOI: 10.1007/s40870-019-00220-z.
[10]	ZHANG Y, ZUO T T, TANG Z, et al. Microstructures and properties of high-entropy alloys [J]. Progress in Materials Science, 2014, 61: 1–93. DOI: 10.1016/j.pmatsci.2013.10.001.
[11]	SADEGHILARIDJANI M, MUSKERI S, HASANNAEIMI V, et al. Strain rate sensitivity of a novel refractory high entropy alloy: intrinsic versus extrinsic effects [J]. Materials Science and Engineering: A, 2019, 766: 138326. DOI: 10.1016/j.msea.2019.138326.
[12]	LI Z Z, ZHAO S T, ALOTAIBI S M, et al. Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy [J]. Acta Materialia, 2018, 151: 424–431. DOI: 10.1016/j.actamat.2018.03.040.
[13]	张平, 李远田, 张金勇, 等. Si对AlCoCrFeNi高熵合金热腐蚀行为的影响 [J]. 稀有金属材料与工程, 2021, 50(10): 3640–3647. ZHANG P, LI Y T, ZHANG J Y, et al. Effect of Si addition on hot corrosion behavior of AlCoCrFeNi high entropy alloys [J]. Rare Metal Materials and Engineering, 2021, 50(10): 3640–3647.
[14]	吴炳乾, 饶湖常, 张冲, 等. Si含量对FeCoCr_0.5NiBSi _x高熵合金涂层组织结构和耐磨性的影响 [J]. 表面技术, 2015, 44(12): 85–91. DOI: 10.16490/j.cnki.issn.1001-3660.2015.12.014. WU B Q, RAO H C, ZHANG C, et al. Effect of silicon content on the microstructure and wear resistance of FeCoCr_0.5NiBSi_x high-entropy alloy coatings [J]. Surface Technology, 2015, 44(12): 85–91. DOI: 10.16490/j.cnki.issn.1001-3660.2015.12.014.
[15]	王根, 李新梅. 第一性原理计算Cu、Co含量对CoCuFeNi系高熵合金的影响 [J]. 功能材料, 2020, 51(3): 3189–3195. DOI: 10.3969/j.issn.1001-9731.2020.03.029. WANG G, LI X M. Effects of Cu, Co contents on CoCuFeNi system high-entropy alloys by the first principle calculation [J]. Journal of Functional Materials, 2020, 51(3): 3189–3195. DOI: 10.3969/j.issn.1001-9731.2020.03.029.
[16]	CANTOR B, CHANG I T H, KNIGHT P, et al. Microstructural development in equiatomic multicomponent alloys [J]. Materials Science and Engineering: A, 2004, 375/376/377: 213–218. DOI: 10.1016/j.msea.2003.10.257.
[17]	YEH J W, CHEN S K, LIN S J, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes [J]. Advanced Engineering Materials, 2004, 6(5): 299–303. DOI: 10.1002/adem.200300567.
[18]	TSAI M H, YEH J W. High-entropy alloys: a critical review [J]. Materials Research Letters, 2014, 2(3): 107–123. DOI: 10.1080/21663831.2014.912690.
[19]	DENG Y, TASAN C C, PRADEEP K G, et al. Design of a twinning-induced plasticity high entropy alloy [J]. Acta Materialia, 2015, 94: 124–133. DOI: 10.1016/j.actamat.2015.04.014.
[20]	LEI Z F, LIU X J, WU Y, et al. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes [J]. Nature, 2018, 563(7732): 546–550. DOI: 10.1038/s41586-018-0685-y.
[21]	GLUDOVATZ B, HOHENWARTER A, CATOOR D, et al. A fracture-resistant high-entropy alloy for cryogenic applications [J]. Science, 2014, 345(6201): 1153–1158. DOI: 10.1126/science.1254581.
[22]	FU Z Q, JIANG L, WARDINI J L, et al. A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength [J]. Science Advances, 2018, 4(10): eaat8712. DOI: 10.1126/sciadv.aat8712.
[23]	ZHANG Z J, MAO M M, WANG J W, et al. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi [J]. Nature Communications, 2015, 6: 10143. DOI: 10.1038/ncomms10143.
[24]	DING Q Q, ZHANG Y, CHEN X, et al. Tuning element distribution, structure and properties by composition in high-entropy alloys [J]. Nature, 2019, 574(7777): 223–227. DOI: 10.1038/s41586-019-1617-1.
[25]	ZOU Y, MA H, SPOLENAK R. Ultrastrong ductile and stable high-entropy alloys at small scales [J]. Nature Communications, 2015, 6: 7748. DOI: 10.1038/ncomms8748.
[26]	TANG Y Q, LI D Y. Dynamic response of high-entropy alloys to ballistic impact [J]. Science Advances, 2022, 8(32): eabp9096. DOI: 10.1126/sciadv.abp9096.
[27]	ANDREOLI A F, HAN X L, KABAN I. In situ studies of non-equilibrium crystallization of Al_xCoCrFeNi ( x=0.3, 1) high-entropy alloys [J]. Journal of Alloys and Compounds, 2022, 922: 166209. DOI: 10.1016/j.jallcom.2022.166209.
[28]	DIAO H Y, MA D, FENG R, et al. Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility [J]. Materials Science and Engineering: A, 2019, 742: 636–647. DOI: 10.1016/j.msea.2018.11.055.
[29]	KIREEVA I V, CHUMLYAKOV Y I, POBEDENNAYA Z V, et al. Effect of V-phase particles on the orientation and temperature dependence of the mechanical behaviour of Al_0.3CoCrFeNi high-entropy alloy single crystals [J]. Materials Science and Engineering: A, 2020, 772: 138772. DOI: 10.1016/j.msea.2019.138772.
[30]	ZHANG J L, QIU R S, TAN X N, et al. The precipitation behavior in Al_0.3CoCrFeNi high-entropy alloy affected by deformation and annealing [J]. Metals, 2023, 13(1): 157. DOI: 10.3390/met13010157.
[31]	YASUDA H Y, SHIGENO K, NAGASE T. Dynamic strain aging of Al_0.3CoCrFeNi high entropy alloy single crystals [J]. Scripta Materialia, 2015, 108: 80–83. DOI: 10.1016/j.scriptamat.2015.06.022.
[32]	KIREEVA I V, CHUMLYAKOV Y I, POBEDENNAYA Z V, et al. The orientation dependence of critical shear stresses in Al_0.3CoCrFeNi high-entropy alloy single crystals [J]. Technical Physics Letters, 2017, 43(7): 615–618. DOI: 10.1134/S1063785017070082.
[33]	MUSKERI S, GWALANI B, JHA S, et al. Excellent ballistic impact resistance of Al_0.3CoCrFeNi multi-principal element alloy with unique bimodal microstructure [J]. Scientific Reports, 2021, 11(1): 22715. DOI: 10.1038/s41598-021-02209-y.
[34]	张荣, 祁文军, 张爽. Al_xCoCrFeNi拉伸力学性能的分子动力学模拟 [J]. 钢铁钒钛, 2022, 43(6): 173–179. DOI: 10.7513/j.issn.1004-7638.2022.06.026. ZHANG R, QI W J, ZHANG S. Molecular dynamics simulation of tensile mechanical properties of Al_xCoCrFeNi [J]. Iron Steel Vanadium Titanium, 2022, 43(6): 173–179. DOI: 10.7513/j.issn.1004-7638.2022.06.026.
[35]	李健, 郭晓璇, 马胜国, 等. AlCrFeCuNi高熵合金力学性能的分子动力学模拟 [J]. 高压物理学报, 2020, 34(1): 011301. DOI: 10.11858/gywlxb.20190762. LI J, GUO X X, MA S G, et al. Mechanical properties of AlCrFeCuNi high entropy alloy: a molecular dynamics study [J]. Chinese Journal of High Pressure Physics, 2020, 34(1): 011301. DOI: 10.11858/gywlxb.20190762.
[36]	张路明. Al_xCoCrFeNi高熵合金力学性能的分子动力学模拟 [D]. 太原: 太原理工大学, 2022. ZHANG L M. Mechanical properties of Al_xCoCrFeNi high-entropy alloy: a molecular dynamics study [D]. Taiyuan: Taiyuan University of Technology, 2022.
[37]	尹宗军, 苏蓉, 方传智, 等. FeNiCrCoCu高熵合金拉伸行为特征研究: 分子动力学模拟 [J]. 南阳师范学院学报, 2023, 22(3): 29–33. DOI: 10.3969/j.issn.1671-6132.2023.03.005. YIN Z J, SU R, FANG C Z, et al. Study on tensile behavior characteristics of FeNiCrCoCu high entropy alloys: molecular dynamics simulation [J]. Journal of Nanyang Normal University, 2023, 22(3): 29–33. DOI: 10.3969/j.issn.1671-6132.2023.03.005.
[38]	BARTON N R, BERNIER J V, BECKER R, et al. A multiscale strength model for extreme loading conditions [J]. Journal of Applied Physics, 2011, 109(7): 073501. DOI: 10.1063/1.3553718.
[39]	HUANG X, DING J, SONG K, et al. Crystal orientation effect on the irradiation mechanical properties and deformation mechanism of α-Fe: molecular dynamic simulations [J]. Journal of Materials Engineering and Performance, 2023, 32(18): 8063–8074. DOI: 10.1007/s11665-022-07730-3.
[40]	ZHANG Y, YU D J, WANG K M. Atomistic simulation of the orientation-dependent plastic deformation mechanisms of iron nanopillars [J]. Journal of Materials Science & Technology, 2012, 28(2): 164–168. DOI: 10.1016/S1005-0302(12)60037-1.
[41]	DASH M K, CHIU Y L, JONES I P, et al. Quasi-static compression of shock loaded, single crystal tantalum micropillars [J]. Materials Science and Engineering:A, 2023, 881: 145415. DOI: 10.1016/j.msea.2023.145415.
[42]	ISLAM A S M J, ISLAM M S, HASAN M S, et al. Anisotropic crystal orientations dependent mechanical properties and fracture mechanisms in zinc blende ZnTe nanowires [J]. RSC Advances, 2023, 13(33): 22800–22813. DOI: 10.1039/D3RA03825D.
[43]	XU W W, DÁVILA L P. Effects of crystal orientation and diameter on the mechanical properties of single-crystal MgAl₂O₄ spinel nanowires [J]. Nanotechnology, 2019, 30(5): 055701. DOI: 10.1088/1361-6528/aaef11.
[44]	SHI K W, CHENG J C, CUI L, et al. Ballistic impact response of Fe₄₀Mn₂₀Cr₂₀Ni₂₀ high-entropy alloys [J]. Journal of Applied Physics, 2022, 132(20): 205105. DOI: 10.1063/5.0130634.
[45]	QI Y M, XU H M, HE T W, et al. Effect of crystallographic orientation on mechanical properties of single-crystal CoCrFeMnNi high-entropy alloy [J]. Materials Science and Engineering: A, 2021, 814: 141196. DOI: 10.1016/j.msea.2021.141196.
[46]	ZHANG Q, HUANG R R, ZHANG X, et al. Deformation mechanisms and remarkable strain hardening in single-crystalline high-entropy-alloy micropillars/nanopillars [J]. Nano Letters, 2021, 21(8): 3671–3679. DOI: 10.1021/acs.nanolett.1c00444.
[47]	PLIMPTON S. Fast parallel algorithms for short-range molecular dynamics [J]. Journal of Computational Physics, 1995, 117(1): 1–19. DOI: 10.1006/jcph.1995.1039.
[48]	FARKAS D, CARO A. Model interatomic potentials for Fe-Ni-Cr-Co-Al high-entropy alloys [J]. Journal of Materials Research, 2020, 35(22): 3031–3040. DOI: 10.1557/jmr.2020.294.
[49]	JONES J E. On the determination of molecular fields: II. from the equation of state of a gas [J]. Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1924, 106(738): 463–477. DOI: 10.1098/rspa.1924.0082.
[50]	FAKEN D, JÓNSSON H. Systematic analysis of local atomic structure combined with 3D computer graphics [J]. Computational Materials Science, 1994, 2(2): 279–286. DOI: 10.1016/0927-0256(94)90109-0.
[51]	HONEYCUTT J D, ANDERSEN H C. Molecular dynamics study of melting and freezing of small Lennard-Jones clusters [J]. The Journal of Physical Chemistry, 1987, 91(19): 4950–4963. DOI: 10.1021/j100303a014.
[52]	STUKOWSKI A. Structure identification methods for atomistic simulations of crystalline materials [J]. Modelling and Simulation in Materials Science and Engineering, 2012, 20(4): 045021. DOI: 10.1088/0965-0393/20/4/045021.
[53]	CORDERO Z C, KNIGHT B E, SCHUH C A. Six decades of the Hall-Petch effect: a survey of grain-size strengthening studies on pure metals [J]. International Materials Reviews, 2016, 61(8): 495–512. DOI: 10.1080/09506608.2016.1191808.
[54]	DEWAPRIYA M A N, MILLER R E. Energy absorption mechanisms of nanoscopic multilayer structures under ballistic impact loading [J]. Computational Materials Science, 2021, 195: 110504. DOI: 10.1016/j.commatsci.2021.110504.
[55]	CHENG Y J, DONG J L, LI F C, et al. Scaling law for impact resistance of amorphous alloys connecting atomistic molecular dynamics with macroscale experiments [J]. ACS Applied Materials and Interfaces, 2023, 15(10): 13449–13459. DOI: 10.1021/acsami.2c19719.
[56]	LI Z M, PRADEEP K G, DENG Y, et al. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off [J]. Nature, 2016, 534(7606): 227–230. DOI: 10.1038/nature17981.
[57]	叶天舟, 姚欢, 巫英伟, 等. FeCrAl合金拉伸力学性能分子动力学研究 [J]. 稀有金属材料与工程, 2023, 52(2): 777–784. DOI: 10.12442/j.issn.1002-185X.20220441. YE T Z, YAO H, WU Y W, et al. Molecular dynamics study on tensile mechanical properties of FeCrAl alloy [J]. Rare Metal Materials and Engineering, 2023, 52(2): 777–784. DOI: 10.12442/j.issn.1002-185X.20220441.
[58]	GAO X Z, LU Y P, ZHANG B, et al. Microstructural origins of high strength and high ductility in an AlCoCrFeNi_2.1 eutectic high-entropy alloy [J]. Acta Materialia, 2017, 141: 59–66. DOI: 10.1016/j.actamat.2017.07.041.
[59]	ZHANG D D, ZHANG J Y, KUANG J, et al. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications [J]. Acta Materialia, 2021, 220: 117288. DOI: 10.1016/j.actamat.2021.117288.
[60]	DE COOMAN B C, ESTRIN Y, KIM S K. Twinning-induced plasticity (TWIP) steels [J]. Acta Materialia, 2018, 142: 283–362. DOI: 10.1016/j.actamat.2017.06.046.
[61]	SUN X H, WU D X, ZOU L F, et al. Dislocation-induced stop-and-go kinetics of interfacial transformations [J]. Nature, 2022, 607(7920): 708–713. DOI: 10.1038/s41586-022-04880-1.
[62]	GANGIREDDY S, GWALANI B, SONI V, et al. Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: single phase FCC vs. dual phase FCC-BCC [J]. Materials Science and Engineering: A, 2019, 739: 158–166. DOI: 10.1016/j.msea.2018.10.021.
[63]	ZHANG Z R, ZHANG H, TANG Y, et al. Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa_0.53 [J]. Materials & Design, 2017, 133: 435–443. DOI: 10.1016/j.matdes.2017.08.022.
[64]	BHAV S B, SUKUMAR G, PRAKASA R P, et al. Superior ballistic performance of high-nitrogen steels against deformable and non-deformable projectiles [J]. Materials Science and Engineering: A, 2019, 751: 115–127. DOI: 10.1016/j.msea.2019.02.044.

Relative Articles

[1]	WANG Hongli, ZENG Zelin, SU Xingya, LING Jing, MEI Guiming, LIANG Yanxiang, JING Lin. Rate-temperature coupled deformation mechanism and constitutive parameters of catenary copper-magnesium alloy materials for high-speed railway[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2025-0047
[2]	CHEN Jialin, LI Shutao, AN Ming, ZHOU Longyun, ZHANG Sheng, LI Rongxin, CHEN Yeqing. Dynamic Response Mechanism and Cumulative Damage Effect of Al0.3CoCrFeNi High Entropy Alloy under Repeated Impact Loading[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2025-0106
[3]	LI Haifeng, MEN Jianbing, JIN Wen, LIU Xudong. J-C model of high-entropy alloy Ta-Hf-Nb-Zr system and its application test[J]. Explosion And Shock Waves, 2025, 45(3): 033103. doi: 10.11883/bzycj-2024-0069
[4]	ZHOU Ziqing, WANG Pengfei, XU Songlin. Wave propagation in lattices based on Tersoff potential[J]. Explosion And Shock Waves, 2024, 44(9): 091421. doi: 10.11883/bzycj-2024-0007
[5]	QIAO Yonggang, HUA Jie, YUAN Danping, ZHANG Zeyu, ZUO Wenzhe. Experimental and molecular dynamics studies on the synergistic suppression of gas explosions in gas-solid media[J]. Explosion And Shock Waves, 2024, 44(5): 055402. doi: 10.11883/bzycj-2023-0322
[6]	YANG Xin, ZHAO Han, GAO Xuejun, CHEN Zhenlin, WANG Fang, ZENG Xiangguo. Molecular dynamics study on spallation in single-crystal and nanocrystalline tin[J]. Explosion And Shock Waves, 2023, 43(2): 023101. doi: 10.11883/bzycj-2022-0203
[7]	YE Haiwang, QIAN Zhengkun, LEI Tao, WEN Ying, LI Rui. Bedding effect and macro-micro mechanism of graphite ore dynamic mechanical properties under impact loads[J]. Explosion And Shock Waves, 2023, 43(12): 123102. doi: 10.11883/bzycj-2023-0223
[8]	LIU Mengting, LI Wanghui, FENG Lanxi, ZHANG Xiaoqing, YAO Xiaohu. Study on shock compression phase transition of single crystal siliconbased on molecular dynamics simulation[J]. Explosion And Shock Waves, 2022, 42(1): 013102. doi: 10.11883/bzycj-2021-0074
[9]	MA Shengguo, WANG Zhihua. Dynamic mechanical properties and constitutive relations of CoCrFeNiAl_xhigh entropy alloys[J]. Explosion And Shock Waves, 2021, 41(11): 111101. doi: 10.11883/bzycj-2020-0293
[10]	CHEN Haihua, ZHANG Xianfeng, LIU Chuang, LIN Kunfu, XIONG Wei, TAN Mengting. Research progress on impact deformation behavior of high-entropy alloys[J]. Explosion And Shock Waves, 2021, 41(4): 041402. doi: 10.11883/bzycj-2020-0414
[11]	LIU Xiaowen, FENG Jianrui, ZHOU Qiang, CHEN Pengwan. Molecular dynamics simulation of shock consolidation of nano tungsten powder[J]. Explosion And Shock Waves, 2020, 40(2): 024202. doi: 10.11883/bzycj-2019-0057
[12]	CHENG Xiangli, ZHAO Hui, JIAO Min, YE Haifu, LI Linchuan. Dynamic response characteristics of the protection system for a projectile-borne recorder under high impact loading[J]. Explosion And Shock Waves, 2019, 39(12): 125102. doi: 10.11883/bzycj-2018-0418
[13]	LI Yixiao, WANG Shengjie. Simulation of hypervelocity impact by the material point method coupled with a new equation of state[J]. Explosion And Shock Waves, 2019, 39(10): 104201. doi: 10.11883/bzycj-2018-0261
[14]	GUO Pengcheng, LI Jian, CAO Shufen, XU Congchang, LIU Zhiwen, LI Luoxing. Deformation behavior and microstructure evolution of an AM80 magnesium alloy at large strain rate range[J]. Explosion And Shock Waves, 2018, 38(3): 586-595. doi: 10.11883/bzycj-2016-0266
[15]	Lu Zi-xing, Li Kang. Numerical simulation on dynamic crushing behaviors of tetrachiral honeycombs[J]. Explosion And Shock Waves, 2014, 34(2): 181-187. doi: 10.11883/1001-1455(2014)02-0181-07
[16]	Guo Zhao-liang, Ren Guo-wu, Tang Tie-gang, Liu Cang-li. Microscopic and macroscopic numerical simulation on interaction between stress wave and flaw[J]. Explosion And Shock Waves, 2014, 34(1): 52-58. doi: 10.11883/1001-1455(2014)01-0052-07
[17]	LIU Ying, ZHANG Xin-chun. Influence of cell micro-topology on the in-plane dynamic properties of honeycombs[J]. Explosion And Shock Waves, 2008, 28(6): 494-502. doi: 10.11883/1001-1455(2008)06-0494-09
[18]	LIU Feng, XI Feng. Deformation mechanism and energy dissipation of an elastic-plastic cantilever beam subjected to step loading[J]. Explosion And Shock Waves, 2008, 28(3): 243-251. doi: 10.11883/1001-1455(2008)03-0243-09
[19]	MA Xiu-fang, ZHAO Feng, XIAO Ji-jun, JI Guang-fu, ZHU Wei, XIAO He-ming. Simulation study on structure and property of HMX-based multi-components PBX[J]. Explosion And Shock Waves, 2007, 27(2): 109-115. doi: 10.11883/1001-1455(2007)02-0109-07

Supplements(0)

Cited By

Cited by

Periodical cited type(2)

1.	李海峰，门建兵，金文，刘旭东. Ta-Hf-Nb-Zr体系高熵合金J-C模型及应用试验. 爆炸与冲击. 2025(03): 55-65 . 本站查看
2.	陈嘉琳，李述涛，安明，艾天淳，马上，陈叶青. 晶界类型对Al_(0.3)CoCrFeNi高熵合金压缩力学性能的影响及机制研究. 力学学报. 2025(03): 658-670 .