Citation: | HUANG Rong, ZHANG Xinyue, HUI Xulong, BAI Chunyu, LIU Xiaochuan, MU Rangke, LI Gang, LI Kui. High-temperature dynamic mechanical properties and intrinsic relationships of K447A alloy[J]. Explosion And Shock Waves, 2025, 45(7): 071413. doi: 10.11883/bzycj-2024-0477 |
[1] |
刘阳, 叶洪涛, 张军, 等. 航空用镍基高温合金切削现状研究 [J]. 航空制造技术, 2011, 54(14): 48–51. DOI: 10.16080/j.issn1671-833x.2011.14.014.
LIU Y, YE H T, ZHANG J, et al. Research on cutting status of Ni-based superalloy in aviation industry [J]. Aeronautical Manufacturing Technology, 2011, 54(14): 48–51. DOI: 10.16080/j.issn1671-833x.2011.14.014.
|
[2] |
YANG G X, XU Y F, JIANG L, et al. High temperature tensile properties and fracture behavior of cast nickel-base K445 superalloy [J]. Progress in Natural Science: Materials International, 2011, 21(5): 418–425. DOI: 10.1016/S1002-0071(12)60078-1.
|
[3] |
CHEN J, ZHOU X Y, WANG W L, et al. A review on fundamental of high entropy alloys with promising high-temperature properties [J]. Journal of Alloys and Compounds, 2018, 760: 15–30. DOI: 10.1016/j.jallcom.2018.05.067.
|
[4] |
EYLON D, FUJISHIRO S, POSTANS P J, et al. High-temperature titanium alloys—a review [J]. JOM, 1984, 36(11): 55–62. DOI: 10.1007/BF03338617.
|
[5] |
李鹏, 叶雷, 程耀永, 等. K447A镍基高温合金钎焊接头组织及性能 [J]. 焊接, 2016(3): 11–13. DOI: 10.3969/j.issn.1001-1382.2016.03.003.
LI P, YE L, CHENG Y Y, et al. Microstructures and mechanical properties of K447A nickel-base superalloy brazed joint [J]. Welding & Joining, 2016(3): 11–13. DOI: 10.3969/j.issn.1001-1382.2016.03.003.
|
[6] |
PAN C L, YAO Z H, MA Y W, et al. Solidification microstructure characteristics and their formation mechanism of K447A nickel-based superalloy for dual-performance blisk [J]. Materials Characterization, 2023, 203: 113155. DOI: 10.1016/j.matchar.2023.113155.
|
[7] |
ZHANG Z L, ZHAO Y, SHAN J G, et al. Influence of heat treatment on microstructures and mechanical properties of K447A cladding layers obtained by laser solid forming [J]. Journal of Alloys and Compounds, 2019, 790: 703–715. DOI: 10.1016/j.jallcom.2019.03.136.
|
[8] |
ZHANG Z L, ZHAO Y, SHAN J G, et al. The role of shot peening on liquation cracking in laser cladding of K447A nickel superalloy powders over its non-weldable cast structure [J]. Materials Science and Engineering: A, 2021, 823: 141678. DOI: 10.1016/j.msea.2021.141678.
|
[9] |
谷怀鹏, 李相辉, 盖其东, 等. K447A合金的热处理组织和拉伸性能研究 [J]. 铸造, 2014, 63(8): 824–827. DOI: 10.3969/j.issn.1001-4977.2014.08.013.
GU H P, LI X H, GAI Q D, et al. Study on the heat-treated microstructure and tensile property of K447A alloy [J]. Foundry, 2014, 63(8): 824–827. DOI: 10.3969/j.issn.1001-4977.2014.08.013.
|
[10] |
WANG J J, WANG Z C, HAN Z W, et al. Effect of rejuvenation heat treatment on the microstructure and stress relaxation behavior of nickel-based superalloy with excess hardness [J]. Materials Characterization, 2023, 204: 113189. DOI: 10.1016/j.matchar.2023.113189.
|
[11] |
焦明木, 宋健民. 一种铸造镍基高温合金显微组织与力学性能研究 [J]. 铸造, 2024, 73(5): 621–625. DOI: 10.3969/j.issn.1001-4977.2024.05.005.
JIAO M M, SONG J M. Research on microstructure and mechanical properties of casting nickel base superalloy [J]. Foundry, 2024, 73(5): 621–625. DOI: 10.3969/j.issn.1001-4977.2024.05.005.
|
[12] |
KORKMAZ M E, GÜNAY M, VERLEYSEN P. Investigation of tensile Johnson-Cook model parameters for Nimonic 80A superalloy [J]. Journal of Alloys and Compounds, 2019, 801: 542–549. DOI: 10.1016/j.jallcom.2019.06.153.
|
[13] |
LIU J, ZHENG B L, ZHANG K, et al. Ballistic performance and energy absorption characteristics of thin nickel-based alloy plates at elevated temperatures [J]. International Journal of Impact Engineering, 2019, 126: 160–171. DOI: 10.1016/j.ijimpeng.2018.12.012.
|
[14] |
WANG J J, HU X Y, YUAN K B, et al. Impact resistance prediction of superalloy honeycomb using modified Johnson-Cook constitutive model and fracture criterion [J]. International Journal of Impact Engineering, 2019, 131: 66–77. DOI: 10.1016/j.ijimpeng.2019.05.001.
|
[15] |
UGODILINWA N E, KHOSHDARREGI M, OJO O A. Analysis and constitutive modeling of high strain rate deformation behavior of Haynes 282 aerospace superalloy [J]. Materials Today Communications, 2019, 20: 100545. DOI: 10.1016/j.mtcomm.2019.100545.
|
[16] |
陈杰, 杨庆祥, 翟若岱. GH4720Li镍基高温合金高应变率动态力学性能研究 [J]. 信息记录材料, 2020, 21(10): 14–16. DOI: 10.16009/j.cnki.cn13-1295/tq.2020.10.007.
CHEN J, YANG Q X, ZHAI R D. Study of high strain rate dynamic mechanical properties of GH4720Li nickel-based high temperature alloy [J]. Information Recording Materials, 2020, 21(10): 14–16. DOI: 10.16009/j.cnki.cn13-1295/tq.2020.10.007.
|
[17] |
KUHN H, MEDLIN D. ASM handbook volume 8: mechanical testing and evaluation [M]. Materials Park, OH: ASM International, 2000: 462–476. DOI: 10.31399/asm.hb.v08.9781627081764.
|
[18] |
WANG J J, GUO W G, GAO X S, et al. The third-type of strain aging and the constitutive modeling of a Q235B steel over a wide range of temperatures and strain rates [J]. International Journal of Plasticity, 2015, 65: 85–107. DOI: 10.1016/j.ijplas.2014.08.017.
|
[19] |
SONG Y, GARCIA-GONZALEZ D, RUSINEK A. Constitutive models for dynamic strain aging in metals: strain rate and temperature dependences on the flow stress [J]. Materials, 2020, 13(7): 1794. DOI: 10.3390/ma13071794.
|
[20] |
KUMAR N, YING Q, NIE X, et al. High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy [J]. Materials & Design, 2015, 86: 598–602. DOI: 10.1016/j.matdes.2015.07.161.
|
[21] |
LEYENS C, PETERS M. Titanium and titanium alloys: fundamentals and applications [M]. Weinheim: Wiley-VCH, 2003. DOI: 10.1002/3527602119.
|
[22] |
MA H J, HUANG L, TIAN Y, et al. Effects of strain rate on dynamic mechanical behavior and microstructure evolution of 5A02-O aluminum alloy [J]. Materials Science and Engineering: A, 2014, 606: 233–239. DOI: 10.1016/j.msea.2014.03.081.
|
[23] |
KHAN A S, MEREDITH C S. Thermo-mechanical response of Al6061 with and without equal channel angular pressing (ECAP) [J]. International Journal of Plasticity, 2010, 26(2): 189–203. DOI: 10.1016/j.ijplas.2009.07.002.
|
[24] |
王忠堂, 张士宏, 冯斌. TC11钛合金应变速率和温度敏感系数 [J]. 沈阳理工大学学报, 2009, 28(3): 5–8. DOI: 10.3969/j.issn.1003-1251.2009.03.002.
WANG Z T, ZHANG S H, FENG B. Strain-rate and temperature sensitivity coefficient for TC11 titanium alloy [J]. Journal of Shenyang Ligong University, 2009, 28(3): 5–8. DOI: 10.3969/j.issn.1003-1251.2009.03.002.
|
[1] | HUANG Qingdan, LI Honggang, LI Jingqiu, KANG Huang, LIAO Xiangbiao, ZHANG Chao. Compressive mechanical behavior and constitutive modeling of power lithium-ion battery separators under strain rate-temperature coupling[J]. Explosion And Shock Waves, 2025, 45(2): 021411. doi: 10.11883/bzycj-2024-0329 |
[2] | WANG Hongli, ZENG Zelin, SU Xingya, LING Jing, MEI Guiming, LIANG Yanxiang, JING Lin. Rate-temperature coupled deformation mechanism and constitutive parameters of catenary copper-magnesium alloy materials for high-speed railway[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2025-0047 |
[3] | XU Peidong, NI Ping, YANG Bao, JIANG Zhenyu, LIU Yiping, LIU Zejia, ZHOU Licheng, TANG Liqun. An intermediate strain rate LSHPB system for soft materials and its application[J]. Explosion And Shock Waves, 2025, 45(3): 031001. doi: 10.11883/bzycj-2024-0307 |
[4] | JIANG Yuting, ZHONG Donghai, FANG Zehui, DING Yuanyuan, ZHOU Fenghua. Mechanical behavior of cuttlebone structure and its strain rate effect[J]. Explosion And Shock Waves, 2024, 44(4): 043102. doi: 10.11883/bzycj-2023-0142 |
[5] | QIU Ji, SU Buyun, JIN Tao, YAO Xiaohu, SHU Xuefeng, LI Zhiqiang, FANG Huiqing. Dynamic deformation behavior and constitutive modeling of multi-component alloys at high temperature[J]. Explosion And Shock Waves, 2024, 44(7): 071001. doi: 10.11883/bzycj-2023-0439 |
[6] | ZHANG Xiangru, CHENG Yuehua, WU Hao. Analysis on dynamic compressive behavior of concrete based on a 3D mesoscale model[J]. Explosion And Shock Waves, 2024, 44(2): 023102. doi: 10.11883/bzycj-2022-0541 |
[7] | GUO Weiguo. An introduction to dynamic consititutive relation ship[J]. Explosion And Shock Waves, 2022, 42(9): 091400. doi: 10.11883/bzycj-2022-0411 |
[8] | ZHU Lei, LIU Yang, MENG Jinhui, LI Zhiguo, HU Jianbo, LI Guoping, WANG Yonggang. Dynamic mechanical properties and constitutive relationship of selective laser melted Ti-6Al-4V alloy[J]. Explosion And Shock Waves, 2022, 42(9): 091405. doi: 10.11883/bzycj-2021-0227 |
[9] | ZHOU Lun, SU Xingya, JING Lin, DENG Guide, ZHAO Longmao. Dynamic tensile constitutive relationship and failure behavior of 6061-T6 aluminum alloy[J]. Explosion And Shock Waves, 2022, 42(9): 091407. doi: 10.11883/bzycj-2022-0154 |
[10] | YUAN Kangbo, YAO Xiaohu, WANG Ruifeng, MO Yonghui. A review on rate-temperature coupling response and dynamic constitutive relation of metallic materials[J]. Explosion And Shock Waves, 2022, 42(9): 091401. doi: 10.11883/bzycj-2021-0416 |
[11] | GAO Yulong, SUN Xiaohong. On the parameters of dynamic deformation and damage models of aluminum alloy 6008-T4 used for high-speed railway vehicles[J]. Explosion And Shock Waves, 2021, 41(3): 033101. doi: 10.11883/bzycj-2020-0119 |
[12] | MA Shengguo, WANG Zhihua. Dynamic mechanical properties and constitutive relations of CoCrFeNiAlx high entropy alloys[J]. Explosion And Shock Waves, 2021, 41(11): 111101. doi: 10.11883/bzycj-2020-0293 |
[13] | CHEN Haihua, ZHANG Xianfeng, LIU Chuang, LIN Kunfu, XIONG Wei, TAN Mengting. Research progress on impact deformation behavior of high-entropy alloys[J]. Explosion And Shock Waves, 2021, 41(4): 041402. doi: 10.11883/bzycj-2020-0414 |
[14] | HU Ling, ZHENG Hang, FENG Qijie, ZHOU Wei, YE Xiangping, LU Lei. Mechanical behavior of long-term neutron-irradiated Al-Mg-Si alloy under compression[J]. Explosion And Shock Waves, 2019, 39(12): 123101. doi: 10.11883/bzycj-2018-0483 |
[15] | HU Liangliang, HUANG Ruiyuan, GAO Guangfa, JIANG Dong, LI Yongchi. A novel method for determining strain rate of concrete-like materials in SHPB experiment[J]. Explosion And Shock Waves, 2019, 39(6): 063102. doi: 10.11883/bzycj-2018-0142 |
[16] | SUN Wenxu, LUO Zhiheng, TANG Mingfeng, LI Ming, LIU Tong, ZHANG Dingguo. Compressive mechanical properties and constitutive relations of PBX-1[J]. Explosion And Shock Waves, 2019, 39(7): 072301. doi: 10.11883/bzycj-2018-0398 |
[17] | Hou Hai-zhou, Hu Yi-ting, Peng Jin-hua, Jin Jian-wei. Dynamic behavior and constitutive model of phenolic cotton fabric material under impact loading[J]. Explosion And Shock Waves, 2015, 35(6): 858-863. doi: 10.11883/1001-1455(2015)06-0858-06 |
[18] | WANG Yang, LI Yu-long, LIU Chuan-xiong. Dynamicmechanicalbehaviorsoficeathighstrainrates[J]. Explosion And Shock Waves, 2011, 31(2): 215-219. doi: 10.11883/1001-1455(2011)02-0215-05 |
[19] | LI Guo-he, WANG Min-jie. Dynamicmechanicalpropertiesandconstitutiverelationshipof hardenedsteel(45HRC)underhightemperatureandhighstrainrate[J]. Explosion And Shock Waves, 2010, 30(4): 433-438. doi: 10.11883/1001-1455(2010)04-0433-06 |