中应变率下材料动态拉伸关键参数测试方法

白春玉 刘小川 周苏枫 黎伟明 舒挽

白春玉, 刘小川, 周苏枫, 黎伟明, 舒挽. 中应变率下材料动态拉伸关键参数测试方法[J]. 爆炸与冲击, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06
引用本文: 白春玉, 刘小川, 周苏枫, 黎伟明, 舒挽. 中应变率下材料动态拉伸关键参数测试方法[J]. 爆炸与冲击, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06
Bai Chun-yu, Liu Xiao-chuan, Zhou Su-feng, Li Wei-ming, Shu Wan. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates[J]. Explosion And Shock Waves, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06
Citation: Bai Chun-yu, Liu Xiao-chuan, Zhou Su-feng, Li Wei-ming, Shu Wan. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates[J]. Explosion And Shock Waves, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06

中应变率下材料动态拉伸关键参数测试方法

doi: 10.11883/1001-1455(2015)04-0507-06
基金项目: 中国飞机强度研究所创新基金项目
详细信息
    作者简介:

    白春玉(1984-), 男, 工程师, baichunyu2006@163.com

  • 中图分类号: O347

Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates

  • 摘要: 通过高速液压伺服材料试验机进行金属材料的中等应变率动态拉伸力学性能测试。为获取精确的动态拉伸载荷数据,提出了一种拉伸载荷的间接测量方法,在不改变试验机原有结构的情况下,解决了试验机自带载荷传感器测试数据在塑性段振荡导致材料真正动力学行为被掩盖的问题;通过数字图像相关的非接触测量方式进行动态拉伸应变的测量。实验验证表明,提出的载荷和应变测试方法可实现金属材料动态拉伸试验中的力学性能参数测试。
  • 图  1  高速液压伺服材料试验机

    Figure  1.  High-speed servo-hydraulic machine

    图  2  高速拉伸试件

    Figure  2.  The especimen used for high-speed tensile

    图  3  试验机自带传感器安装位置图示

    Figure  3.  Transducer set-up in servo-hydraulic machine

    图  4  6 m/s拉伸速度下载荷传感器测试数据

    Figure  4.  Dynamic load data cell at the stretching speed of 6 m/s

    图  5  应变片连接及粘贴示意图

    Figure  5.  Circle connection and paste position of the strain gauges

    图  6  测试系统示意图

    Figure  6.  Sketch of testing system

    图  7  0.6 m/s拉伸速度下测试载荷数据

    Figure  7.  Force measurement data at the stretching speed of 0.6 m/s

    图  8  6 m/s拉伸速度下测试载荷数据对比

    Figure  8.  Force measurement data at the stretching speed of 6 m/s

    图  9  非接触测量应变数据

    Figure  9.  Local strain measurement data by digital speckle photographs

    图  10  4 m/s拉伸速度下应力-应变关系

    Figure  10.  Stress versus strain at the stretching speed of 4 m/s

    图  11  6 m/s拉伸速度下应力-应变关系

    Figure  11.  Stress versus strain at the stretching speed of 6 m/s

    图  12  10 m/s拉伸速度下应力-应变关系

    Figure  12.  Stress versus strain at the stretching speed of 10 m/s

  • [1] 郑修麟, 工程材料的力学行为[M].西安: 西北工业大学出版社, 2004: 5-19.
    [2] 张庆明, 刘彦.材料的动力学行为[M].北京: 国防工业出版社, 2006: 36-48.
    [3] 王礼立.应力波基础[M].北京: 国防工业出版社, 2005: 28-47.
    [4] LeBlanc M, Lassila D. A hybrid technique for compression testing at intermediate strain rates[J]. Experiment Techniques, 1996, 20(5): 21-24. doi: 10.1111/j.1747-1567.1996.tb00459.x
    [5] Ramzi O, Pierrick G. A modified servo-hydraulic machine fort esting at intermediate strain rates[J]. International Journal of Impact Engineering, 2009, 36(3): 460-467. doi: 10.1016/j.ijimpeng.2008.06.003
    [6] Lundberg B, Henchoz A. Analysis of elastic waves from two-point strain measurement[J]. Experiment Techniques, 1977, 17(6): 213-218. doi: 10.1007/BF02324491
    [7] Wallace D C. Flow process of weak shocks in solids[J]. Physical Review B, 1980, 22(4): 1487-1494. doi: 10.1103/PhysRevB.22.1487
    [8] Diot S, Guines D, Gavrus A. Two-step procedure for identification of metal behavior from dynamic compression tests[J]. International Journal of Impact Engineering, 2007, 34(7): 1163-1184. doi: 10.1016/j.ijimpeng.2006.07.003
    [9] 余同希, 邱信明.冲击动力学[M].北京: 清华大学出版社, 2011: 37-49.
    [10] 周生国.机械工程测试技术[M].北京: 北京理工大学出版社, 1993: 38-46.
    [11] Wood P K C, Schley C A. Strain rate testing of metallic materials and their modelling for use in CAE based automotive crash simulation tools[M]. Smithers Rapra Press, 2009: 412-424.
    [12] 孙侠生, 齐丕骞.民用飞机结构强度刚度设计与验证指南[M].北京: 航空工业出版社, 2012: 151-202.
  • 加载中
图(12)
计量
  • 文章访问数:  4015
  • HTML全文浏览量:  457
  • PDF下载量:  810
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-11-29
  • 修回日期:  2015-01-20
  • 刊出日期:  2015-07-25

目录

    /

    返回文章
    返回