Research on penetration of small size fragment to single soldier protection equipment

ZHOU Jie; ZHI Xiaoqi; XU Jinbo; YUE Zhonghao

doi:10.11883/bzycj-2018-0023

Volume 39 Issue 2

Feb. 2019

Turn off MathJax

Article Contents

Article Navigation > Explosion And Shock Waves > 2019 > 39(2): 023304

ZHOU Jie, ZHI Xiaoqi, XU Jinbo, YUE Zhonghao. Research on penetration of small size fragment to single soldier protection equipment[J]. Explosion And Shock Waves, 2019, 39(2): 023304. doi: 10.11883/bzycj-2018-0023

Citation:

ZHOU Jie, ZHI Xiaoqi, XU Jinbo, YUE Zhonghao. Research on penetration of small size fragment to single soldier protection equipment[J]. Explosion And Shock Waves, 2019, 39(2): 023304. doi: 10.11883/bzycj-2018-0023

Citation:

PDF( 1644 KB)

Research on penetration of small size fragment to single soldier protection equipment

doi: 10.11883/bzycj-2018-0023

1.
School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, Shanxi, China
2.
Jinxi Industrial Refco Group Ltd, Taiyuan 030051, Shanxi, China

Received Date: 2018-01-23
Rev Recd Date: 2018-04-26
Publish Date: 2019-02-05

Abstract

Abstract

In order to find out whether the small size fragment can penetrate the ordinary single-soldier bulletproof clothes and bulletproof helmets effectively, the spherical fragment has been selected as the object, obtained the limit velocities of the 0.2 g spherical tungsten alloy fragment penetrating the level Ⅲ body armor and level Ⅳ bulletproof helmet. The thickness of Q235 equivalent targets of body armor and bulletproof helmet is obtained by the means of numerical simulation, and the influence rule of the fragment's mass on the limit velocity is investigated.The conclusions is important to the development of new anti-infantry weapons and soldier's basic protective equipments.
- small size spherical fragment,
- single soldier bulletproof equipment,
- limit penetration velocity,
- equivalent targrt

FullText(HTML)

References(14)

References

[1]	邹渝.机械化步兵单兵防护装备发展研究[J].中国个体防护装备, 2015, 3(4):18-22. http://d.old.wanfangdata.com.cn/Periodical/zggtfhzb201503004 ZOU Yu. Research on development of protection equipment for mechanic infantry soldier[J]. China Personal Protective Equipment, 2015, 3(4):18-22. http://d.old.wanfangdata.com.cn/Periodical/zggtfhzb201503004
[2]	邹渝, 李曙光, 肖南.单兵防弹衣对穿甲破片的防护效应研究[J].医疗卫生装备, 2015, 36(11):36-38. http://d.old.wanfangdata.com.cn/Periodical/ylwszb201511010 ZOU Yu, LI Shuguang, XIAO Nan. Study on protective effect of individual bulletproof cloth against armor-piercing fragments[J]. Chinese Medical Equipment Journal, 2015, 36(38):36-38. http://d.old.wanfangdata.com.cn/Periodical/ylwszb201511010
[3]	王晓强, 朱锡, 梅志远, 等.超高分子量聚乙烯纤维增强层合厚板抗弹性能实验研究[J].爆炸与冲击, 2009, 29(1):29-34. doi: 10.3321/j.issn:1001-1455.2009.01.006 WANG Xiaoqiang, ZHU Xi, MEI Zhiyuan, et al. Ballistic performances of ultra-high molecular weight polyethylene fiber-reinforced thick laminated plates[J]. Explosion and Shock Waves, 2009, 29(1):29-34. doi: 10.3321/j.issn:1001-1455.2009.01.006
[4]	李常胜, 黄献聪, 李焱, 等.软体防弹衣穿透概率的分析[J].兵工学报, 2013, 34(1):20-24. doi: 10.11809/scbgxb2013.04.007 LI Changsheng, HUANG Xiancong, LI Yan, et al. Study on the probability of perforation for soft body armor[J]. Acta Armamentarii, 2013, 34(4):20-24. doi: 10.11809/scbgxb2013.04.007
[5]	FREITAS C J, MATHIS J T, SCOTT N, et al. Dynamic response due to behind helmet blunt trauma measured with a human head surrogate[J]. International Journal of Medical Sciences, 2014, 11(5):409-25. doi: 10.7150/ijms.8079
[6]	蔡志华, 包正, 王威, 等.枪弹冲击防弹头盔致头部非贯穿性损伤的数值模拟研究[J].兵工学报, 2017, 38(6):1097-1105. doi: 10.3969/j.issn.1000-1093.2017.06.008 CAI Zhihuan, BAO Zheng, WANG Wei, et al. Simulation of non-penetrating damage of head due to bullet impact to helmet[J]. Acta Armamentarii, 2017, 38(6):1097-1105. doi: 10.3969/j.issn.1000-1093.2017.06.008
[7]	孙幸福.防弹头盔研制技术及发展前景[J].中国个体防护装备, 2009(1):14-38. doi: 10.3969/j.issn.1671-0312.2009.01.005 SUN Xingfu. Developing technology and prospect of ballistic helmet[J]. China Personal Protective Equipment, 2009(1):14-38. doi: 10.3969/j.issn.1671-0312.2009.01.005
[8]	张国伟.终点效应及其应用技术[M].北京:国防工业出版社, 2006:2-3
[9]	王林, 李晓辉, 刘永付, 等.基于比动能标准的战斗部杀伤威力评价方法研究[J].测控技术, 2012, 31(增刊):88-90. http://d.old.wanfangdata.com.cn/Conference/7727442 WANG Lin, LI Xiaohui, LIU Yongfu, et al. Study of anti-personal warhead killing power based on the specific kinetic energy lethality criteria[J]. Measurement and Control Technology, 2012, 31(suppl):88-90. http://d.old.wanfangdata.com.cn/Conference/7727442
[10]	杨玉林, 赵国志, 王戈冰.装甲目标毁伤评估的等效靶方法[J].火力与指挥控制, 2003, 28(6):81-84. doi: 10.3969/j.issn.1002-0640.2003.06.024 YANG Yulin, ZHAO Guozhi, WANG Gebing. Surrogates for armor targets vulnerability assessment[J]. Fire Control and Command Control, 2003, 28(6):81-84. doi: 10.3969/j.issn.1002-0640.2003.06.024
[11]	张庆明, 黄风雷, 周兰庭.破片贯穿目标等效靶的极限速度[J].兵工学报, 1996, 17(1):21-25. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600175191 ZHANG Qingming, HUANG Fenglei, ZHOU Lanting. Limit velocity for the penetrarion of fragments into their targets[J]. Acta Armamentarii, 1996, 17(1):21-25. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600175191
[12]	米双山, 何剑斌, 张锡恩, 等.战斗损伤仿真中的等效靶与破片终点速度研究[J].兵工学报, 2005, 26(5):605-608. doi: 10.3321/j.issn:1000-1093.2005.05.007 MI Shuangshan, HE Jianbin, ZHANG Xien, et al. Equivalent target and terminal velocity of fragments in battle damage simulation[J]. Acta Armamentarii. 2005, 26(5):605-608. doi: 10.3321/j.issn:1000-1093.2005.05.007
[13]	刘鹏飞.破片特性对冲击起爆B炸药比动能阈值的影响[D].太原: 中北大学, 2017. http://cdmd.cnki.com.cn/Article/CDMD-10110-1017201882.htm
[14]	马红磊, 胡更开, 李树奎.97钨合金力学性能研究[J].兵器材料科学与工程, 2003, 26(6):39-41. doi: 10.3969/j.issn.1004-244X.2003.06.010 MA Honglei, HU Gengkai, LI Shukui. Mechanical properties of 97% tungstenalloy[J]. Ordnance Material Science and Engineerin, 2003, 26(6):39-41. doi: 10.3969/j.issn.1004-244X.2003.06.010