Performance of a 60 kJ electric gun

CHEN Lin; DAI Ying-Min; SU Jian-Jun; FENG Shu-Ping; XIE Wei-Ping; WANG Hui; REN Jing; WU Shou-Dong; LI Ye

doi:10.11883/1001-1455(2010)03-0283-05

Volume 30 Issue 3

Nov. 2010

Turn off MathJax

Article Contents

Article Navigation > Explosion And Shock Waves > 2010 > 30(3): 283-287

CHEN Lin, DAI Ying-Min, SU Jian-Jun, FENG Shu-Ping, XIE Wei-Ping, WANG Hui, REN Jing, WU Shou-Dong, LI Ye. Performance of a 60 kJ electric gun[J]. Explosion And Shock Waves, 2010, 30(3): 283-287. doi: 10.11883/1001-1455(2010)03-0283-05

Citation:

CHEN Lin, DAI Ying-Min, SU Jian-Jun, FENG Shu-Ping, XIE Wei-Ping, WANG Hui, REN Jing, WU Shou-Dong, LI Ye. Performance of a 60 kJ electric gun[J]. Explosion And Shock Waves, 2010, 30(3): 283-287. doi: 10.11883/1001-1455(2010)03-0283-05

Citation:

PDF( 752 KB)

Performance of a 60 kJ electric gun

doi: 10.11883/1001-1455(2010)03-0283-05

Publish Date: 2010-05-25

Abstract

Abstract

A 100 kV/60 kJ electric gun was developed. The electrical character and geometric scale of the load,as well as the experimental setup,were presented. The experimental results indicate that the flyer has good integrality and high flatness. The electric gun can accelerate the 0.15-mm-thick Mylar flyer with the diameter of 18 mm (53 mg) to 8.1 km/s,and the 0.2-mm-thick Mylar flyer with the diameter of 12 mm (32 mg) to 9.6 km/s,respectively. The 60 kJ electric gun has high driving capability and can be used as an effective driver to carry out dynamic response of materials under high strain rates and some other relative investigations.
- mechanics of explosion| electric gun| flyer,
- bridge foil,