Bai Chun-yu, Liu Xiao-chuan, Zhou Su-feng, Li Wei-ming, Shu Wan. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates[J]. Explosion And Shock Waves, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06
Citation:
Bai Chun-yu, Liu Xiao-chuan, Zhou Su-feng, Li Wei-ming, Shu Wan. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates[J]. Explosion And Shock Waves, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06
Bai Chun-yu, Liu Xiao-chuan, Zhou Su-feng, Li Wei-ming, Shu Wan. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates[J]. Explosion And Shock Waves, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06
Citation:
Bai Chun-yu, Liu Xiao-chuan, Zhou Su-feng, Li Wei-ming, Shu Wan. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates[J]. Explosion And Shock Waves, 2015, 35(4): 507-512. doi: 10.11883/1001-1455(2015)04-0507-06
In order to obtain dynamic tensile mechanical properties of metal materials under intermediate strain rate with servo-hydraulic machine, an indirect measurement method without changing the original structure of the testing maching is proposed to achieve accurate dynamic tensile load. The authentic dynamic behaviors are acquired at the plastic stage due to the oscillations of test data measured by the load cell integrated to the machine. In addition, the measurement of strain is solved in a non-contact mode relating to the digital image correlation method. The testing results indicate that both solutions developed in this paper can successfully test the mechanical properties in the dynamic tensile tests of metal materials.
LeBlanc M, Lassila D. A hybrid technique for compression testing at intermediate strain rates[J]. Experiment Techniques, 1996, 20(5): 21-24. doi: 10.1111/j.1747-1567.1996.tb00459.x
[5]
Ramzi O, Pierrick G. A modified servo-hydraulic machine fort esting at intermediate strain rates[J]. International Journal of Impact Engineering, 2009, 36(3): 460-467. doi: 10.1016/j.ijimpeng.2008.06.003
[6]
Lundberg B, Henchoz A. Analysis of elastic waves from two-point strain measurement[J]. Experiment Techniques, 1977, 17(6): 213-218. doi: 10.1007/BF02324491
[7]
Wallace D C. Flow process of weak shocks in solids[J]. Physical Review B, 1980, 22(4): 1487-1494. doi: 10.1103/PhysRevB.22.1487
[8]
Diot S, Guines D, Gavrus A. Two-step procedure for identification of metal behavior from dynamic compression tests[J]. International Journal of Impact Engineering, 2007, 34(7): 1163-1184. doi: 10.1016/j.ijimpeng.2006.07.003
[9]
余同希, 邱信明.冲击动力学[M].北京: 清华大学出版社, 2011: 37-49.
[10]
周生国.机械工程测试技术[M].北京: 北京理工大学出版社, 1993: 38-46.
[11]
Wood P K C, Schley C A. Strain rate testing of metallic materials and their modelling for use in CAE based automotive crash simulation tools[M]. Smithers Rapra Press, 2009: 412-424.
DownLoad:
