Volume 43 Issue 4
Apr.  2023
Turn off MathJax
Article Contents
ZHONG Donghai, GUO Xin, XIONG Xuemei, ZHENG Yuxuan, SONG Li. Direct-impact double-loading Hopkinson bar technique[J]. Explosion And Shock Waves, 2023, 43(4): 044101. doi: 10.11883/bzycj-2022-0210
Citation: ZHONG Donghai, GUO Xin, XIONG Xuemei, ZHENG Yuxuan, SONG Li. Direct-impact double-loading Hopkinson bar technique[J]. Explosion And Shock Waves, 2023, 43(4): 044101. doi: 10.11883/bzycj-2022-0210

Direct-impact double-loading Hopkinson bar technique

doi: 10.11883/bzycj-2022-0210
  • Received Date: 2022-05-16
  • Rev Recd Date: 2022-10-24
  • Available Online: 2022-10-26
  • Publish Date: 2023-04-05
  • When the conventional split Hopkinson pressure bar (SHPB) experimental method is used to realize large deformation of the specimen at a low strain rate, it is often necessary to employ an ultra-long compression bar system. However, the high cost of machining long bars and occupying large laboratory space limits the application and generalization of this technique. In this paper, a direct impact Hopkinson pressure bar double loading experimental technique is proposed. The stress wave in the transmission bar is reflected by the quasi-rigid wall at the end of the transmission bar to realize the double loading of the specimen. The influence of the size of the quasi-rigid mass on the double loading is further analyzed. The two-point wave separation method is used to separate and calculate the superimposed stress wave effectively, and the long duration loading of 1.2 ms is realized in the pressure bar system with a total length of 4 m, and the strain rate curve and stress-strain relationship of the specimen are obtained accurately. The finite element model of both direct-impact double loading and ultra-long Hopkinson bars are established. Numerical results indicate that this experimental technique can effectively achieve double loading of the specimen. Comparing the simulation results of direct-impact double loading Hopkinson bar with those of ultra-long Hopkinson bars, it is evident that the stress-strain relationships obtained by the two experimental devices are completely consistent. For direct-impact double loading Hopkinson bar, the stress-strain relationship calculated by the two-point wave separation technique is the same as that obtained by direct extraction method. Then, an experimental device of direct impact double-loading Hopkinson pressure bar has been set up, including a strike bar, a transmission bar and a rigid block. In addition, the dynamic compression experiment of aluminum alloy was carried out using this device, and the large deformation dynamic mechanical properties of aluminum alloy were tested under the strain rate of 102 s−1.
  • loading
  • [1]
    SONG B, SYN C J, GRUPIDO C L, et al. A long split Hopkinson pressure bar (LSHPB) for intermediate-rate characterization of soft materials [J]. Experimental Mechanics, 2008, 48(6): 809–815. DOI: 10.1007/s11340-007-9095-z.
    [2]
    ZHAO H, GARY G. A new method for the separation of waves. Application to the SHPB technique for an unlimited duration of measurement [J]. Journal of the Mechanics and Physics of Solids, 1997, 45(7): 1185–1202. DOI: 10.1016/S0022-5096(96)00117-2.
    [3]
    SHIM J, MOHR D. Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, Intermediate and High Strain Rates [J]. International Journal of Impact Engineering, 2009, 36(9): 1116–1127. DOI: 10.1016/j.ijimpeng.2008.12.010.
    [4]
    DHARAN C K H, HAUSER F E. Determination of stress-strain characteristics at very high strain rates [J]. Experimental Mechanics, 1970, 10(9): 370–376. DOI: 10.1007/BF02320419.
    [5]
    WULF G L. The high strain rate compression of 7039 aluminium [J]. International Journal of Mechanical Sciences, 1978, 20(9): 609–615. DOI: 10.1016/0020-7403(78)90019-X.
    [6]
    GORHAM D A, POPE P H, FIELD J E. An improved method for compressive stress-strain measurements at very high strain rates [J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1992, 438(1902): 153–170. DOI: 10.1098/rspa.1992.0099.
    [7]
    SHIOIRI J, SAKINO K, SANTOH S. Strain rate sensitivity of flow stress at very high rates of strain [M]//KAWATA K, SHIOIRI J. Constitutive Relation in High/Very High Strain Rates. Tokyo: Springer, 1996. DOI: 10.1007/978-4-431-65947-1_6.
    [8]
    ZHAO H, ELNASRI I, ABDENNADHER S. An experimental study on the behaviour under impact loading of metallic cellular materials [J]. International Journal of Mechanical Sciences, 2005, 47(4/5): 757–774. DOI: 10.1016/j.ijmecsci.2004.12.012.
    [9]
    LIU J G, HE S Y, ZHAO H, et al. Experimental investigation on the dynamic behaviour of metal foam: from yield to densification [J]. International Journal of Impact Engineering, 2018, 114: 69–77. DOI: 10.1016/j.ijimpeng.2017.12.016.
    [10]
    陈浩, 郭鑫, 宋力. 直接撞击式大变形霍普金森压杆实验技术 [J]. 宁波大学学报(理工版), 2018, 31(4): 70–73. DOI: 10.3969/j.issn.1001-5132.2018.04.012.

    CHEN H, GUO X, SONG L. A direct impact Hopkinson pressure bar technique for material testing in large deformation [J]. Journal of Ningbo University (Natural Science & Engineering Edition), 2018, 31(4): 70–73. DOI: 10.3969/j.issn.1001-5132.2018.04.012.
    [11]
    GILAT A, SEIDT J D, MATRKA T A, et al. A new device for tensile and compressive testing at intermediate strain rates [J]. Experimental Mechanics, 2019, 59(5): 725–731. DOI: 10.1007/s11340-019-00488-1.
    [12]
    WHITTINGTON W R, OPPEDAL A L, FRANCIS D K, et al. A novel intermediate strain rate testing device: The serpentine transmitted bar [J]. International Journal of Impact Engineering, 2015, 81: 1–7. DOI: 10.1016/j.ijimpeng.2015.02.009.
    [13]
    LINDHOLM U S. Some experiments with the split Hopkinson pressure bar [J]. Journal of the Mechanics and Physics of Solids, 1964, 12(5): 317–335. DOI: 10.1016/0022-5096(64)90028-6.
    [14]
    XIA K, CHEN R, HUANG S, et al. Controlled multipulse loading with a stuffed striker in classical split Hopkinson pressure bar testing [J]. Review of Scientific Instruments, 2008, 79(5): 053906. DOI: 10.1063/1.2928810.
    [15]
    巫绪涛, 胡时胜, 张芳荣. 两点应变测量法在SHPB测量技术上的运用 [J]. 爆炸与冲击, 2003, 23(4): 309–312.

    WU X T, HU S S, ZHANG F R. Application of two-point strain measurement to the SHPB technique [J]. Explosion and Shock Waves, 2003, 23(4): 309–312.
    [16]
    LUNDBERG B, HENCHOZ A. Analysis of elastic waves from two-point strain measurement [J]. Experimental Mechanics, 1977, 17(6): 213–218. DOI: 10.1007/BF02324491.
    [17]
    YANAGIHARA N. The new measuring method of impact force [J]. Bulletin of JSME, 1978, 21(157): 1085–1088. DOI: 10.1299/jsme1958.21.1085.
    [18]
    王礼立. 应力波基础 [M]. 2版. 北京: 国防工业出版社, 2005: 47–50.

    WANG L L. Foundation of stress waves [M]. 2nd ed. Beijing: National Defense Industry Press, 2005: 47–50.
    [19]
    OTHMAN R. Wave separation techniques [M]//OTHMAN R. The Kolsky-Hopkinson Bar Machine: Selected Topics. Cham: Springer, 2018: 183–203. DOI: 10.1007/978-3-319-71919-1_7.
    [20]
    JOHNSON G R, COOK W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures [J]. Engineering Fracture Mechanics, 1985, 21(1): 31–48. DOI: 10.1016/0013-7944(85)90052-9.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(11)

    Article Metrics

    Article views (433) PDF downloads(198) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return