Hopkinson压杆技术在中国的发展回顾

胡时胜; 王礼立; 宋力; 张磊

doi:10.11883/1001-1455(2014)06-0641-17

Hopkinson压杆技术在中国的发展回顾

doi: 10.11883/1001-1455(2014)06-0641-17

1.
中国科学技术大学近代力学系，安徽合肥 230027
2.
宁波大学力学和材料科学研究中心，浙江宁波 315211
3.
总参工程兵科研三所，河南洛阳 471023

详细信息

作者简介:
胡时胜(1945-), 男, 教授, 博士生导师

中图分类号: O347.1
计量
- 文章访问数: 5523
- HTML全文浏览量: 945
- PDF下载量: 1442
- 被引次数: 0
出版历程
- 收稿日期: 2014-09-10
- 刊出日期: 2014-11-25

Review of the development of Hopkinson pressure bar technique in China

1.
Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, Anhui, China
2.
Mechanics and Materials Science Research Center, Ningbo University, Ningbo 315211, Zhejiang, China
3.
The Third Engineering Scientific Research Institute of the Headquarters of the General Staff, Luoyang 471023, Henan, China

More Information

Corresponding author: Hu Shi-sheng, sshu@ustc.edu.cn

摘要

摘要: 简要回顾了Hopkinson压杆实验技术在中国的发展历程及推广应用。系统介绍了关于金属、高聚物、复合材料、脆性材料、混凝土及软材料、泡沫材料等材料的SHPB实验技术研究，并对相关材料的实验结果进行简要讨论。
- 固体力学 /
- 霍普金森压杆 /
- 实验技术 /
- 金属 /
- 高聚物 /
- 复合材料 /
- 脆性材料 /
- 混凝土 /
- 软材料 /
- 泡沫
Abstract: This paper briefly reviews the development and application of the Hopkinson pressure bar experimental technique in China.The research works on the SHPB experimental techniques related to metal, polymer, composite, brittle material, concrete, soft material and foam material are presented.The results of the SHPB tests are discussed.
- solid mechanics /
- Hopkinson pressure bar /
- experimental technique /
- metal /
- polymer /
- composite material /
- brittle material /
- concrete /
- soft material /
- foam material

HTML全文

图 1 J.Hopkinson的实验^[1]

Figure 1. The experiment by J.Hopkinson^[1]

下载: 全尺寸图片幻灯片

图 2 B.Hopkinson的实验^[2]

Figure 2. The experiment by B.Hopkinson^[2]

下载: 全尺寸图片幻灯片

图 3 原始的Kolsky杆

Figure 3. The original Kolsky bar

下载: 全尺寸图片幻灯片

图 4 常规的分离式Hopkinson压杆装置

Figure 4. The general split Hopkinson pressure bar apparatus

下载: 全尺寸图片幻灯片

图 5 5个单位给出的钛合金和紫铜的动态应力应变曲线

Figure 5. Compressive stress-strain curves for titanium alloy and pure copper by five units

下载: 全尺寸图片幻灯片

图 6 RTV630橡胶试件变形过程^[26]

Figure 6. High-speed deformation of an RTV630 rubber^[26]

下载: 全尺寸图片幻灯片

图 7 三向同步受压的围压装置^[39]

Figure 7. The confining pressure device for synchronous compression in three directions^[39]

下载: 全尺寸图片幻灯片

图 8 纯锆材料的绝热剪切破坏及剪切带^[50]

Figure 8. Adiabatic shearing bands of pure zirconium^[50]

下载: 全尺寸图片幻灯片

图 9 镁铝合金的剪切破坏现象^[51]

Figure 9. Shearing failure of magnesium-aluminum alloy^[51]

下载: 全尺寸图片幻灯片

图 10 测量混凝土层裂强度的实验方案^[80]

Figure 10. Schematic experimental setup measuring spalling strength of concrete^[80]

下载: 全尺寸图片幻灯片

图 11 冲击压剪实验装置示意图及试件界面受力分析^[83]

Figure 11. Schematic apparatus of compression shear experiment and analysis on stress at the specimen's interface^[83]

下载: 全尺寸图片幻灯片

图 12 冲击压剪实验装置示意图及试件界面受力分析^[84]

Figure 12. Schematic apparatus of compression shear experiment and analysis on stress at the specimen's interface^[84]

下载: 全尺寸图片幻灯片

图 13 改进的SHPB装置简图^[24]

Figure 13. Schematic of the modified SHPB setup^[24]

下载: 全尺寸图片幻灯片

图 14 在11 m/s的撞击速度下，C60-0素混凝土自由面反射的高速摄影结果^[88]

Figure 14. High-speed photographies for C60-0 concrete specimen subjected to the striker velocity of 11 m/s^[88]

下载: 全尺寸图片幻灯片

图 15 局部变形带发展过程^[89]

Figure 15. Development process of localized deformation band^[89]

下载: 全尺寸图片幻灯片

参考文献(89)

[1]	Hopkinson J. On the rupture of iron wire by a blow[C]//Proceedings of the Literary and Philosophical Society of Manchester, 1872, 11: 40-45.
[2]	Hopkinson B. A method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets[C]//Containing Papers of a Mathematical or Physical Character. London: Philosophical Transactions of the Royal Society, 1914, A213: 437-456.
[3]	Taylor G I. James Forrest lecture 1946: The testing of materials at high rates of loading[J]. Journal of the ICE, 1946, 26(8): 486-519.
[4]	Volterra E. Alcuni risultati di prove dinamiche sui materiali[J]. Rivista del Nuovo Cimento, 1948(4): 1-28.
[5]	Davies R M. A critical study of the Hopkinson pressure bar[J]. Philosophical Transactions of the Royal Society of London: Series A: Mathematical and Physical Sciences, 1948, 240(821): 375-457.
[6]	Kolsky H. An investigation of the mechanical properties of materials at very high rates of loading[J]. Proceedings of the Physical Society: Section B, 1949, 62(11): 676-700.
[7]	段祝平, 孙琦清, 杨大光, 等.高应变率下金属动力学性能的实验与理论研究:一维杆的实验方法及其应用[J].力学进展, 1980, 10(1).
[8]	王礼立, 胡时胜.钛合金TB-2在高应变率下的动态应力应变关系[J].爆炸与冲击, 1985, 5(1): 9-15. Wang Li-li, Hu Shi-sheng. The dynamic stress-strain relation of Ti-alloy TB-2 under high strain-rates[J]. Explosion and Shock Waves, 1985, 5(1): 9-15.
[9]	羡梦梅.聚合物复合材料在高应变率下的力学性能[J].工程塑料应用, 1989(3): 46-53. Xian Meng-mei. Dynamic mechanical properties of the high polymer and composite materials at high strain rates[J]. Engineering Plastics Application, 1989(3): 46-53.
[10]	杨道明, 于捷, 李紫桐, 等.高应变率下三种钢材性能及损伤机理的实验研究[J].兵工学报, 1992(3): 65-73. Yang Dao-ming, Yu Jie, Li Zi-tong, et al. An experimental study on the tensile properties and damage mechanism of three alloy steels at high strain rate[J]. Acta Armamentarii, 1992(3): 65-73.
[11]	杨桂通, 宋育兆.固体材料在高应变率条件下的TSHB实验技术[J].应用数学和力学, 1985, 6(5): 383-388. Yang Gui-tong, Song Yu-zhao. The TSHB technique for material testing at high rates of strain[J]. Applied Mathematics and Mechanics, 1985, 6(5): 383-388.
[12]	宋顺成, 田时雨. Hopkinson冲击拉杆的改进及应用[J].爆炸与冲击, 1992, 12(1): 62-67. Song Shun-cheng, Tian Shi-yu. Dynamic tensile testing of materials using the hollow Hopkinson bars instead of the solid Hopkinson bars[J]. Explosion and Shock Waves, 1992, 12(1): 62-67.
[13]	宋力, 胡时胜. SHPB实验中的端面凹陷修正[J].爆炸与冲击, 2010, 30(2): 203-208. Song Li, Hu Shi-sheng. Correction of end-face indentation in SHPB test[J]. Explosion and Shock Waves, 2010, 30(2): 203-208.
[14]	宋力, 胡时胜. SHPB数据处理中的二波法与三波法[J].爆炸与冲击, 2005, 25(4): 368-373. Song Li, Hu Shi-sheng. Two-wave and three-wave method in SHPB data processing[J]. Explosion and Shock Waves, 2005, 25(4): 368-373.
[15]	周风华, 王礼立, 胡时胜.高聚物SHPB试验中试件早期应力不均匀性的影响[J].实验力学, 1992, 7(1): 23-29. Zhou Feng-hua, Wang Li-li, Hu Shi-sheng. On the effect of stress nonuniformness in polymer specimen of SHPB tests[J]. Journal of Experimental Mechanics, 1992, 7(1): 23-29.
[16]	王志华, 马宏伟, 赵隆茂, 等.反分析法在泡沫金属材料动态性能实验中的应用[J].爆炸与冲击, 2006, 26(5): 410-415. Wang Zhi-hua, Ma Hong-wei, Zhao Long-mao, et al. Application of the inverse analysis to the experimental study on dynamic behavior of metallic foam materials[J]. Explosion and Shock Waves, 2006, 26(5): 410-415.
[17]	李夕兵, 刘德顺, 古德生.消除岩石动态实验曲线振荡的有效途径[J].中南工业大学学报:自然科学版, 1995, 26(4): 457-460. Li Xi-bing, Liu De-shun, Gu De-sheng. Effective method of elimilating the oscillation of rock dynamic stress-strain-strain rate curve[J]. Journal of Central South University of Technology: Natural Science, 1995, 26(4): 457-460.
[18]	卢芳云, Chen W, Frew D J.软材料的SHPB实验设计[J].爆炸与冲击, 2002, 22(1): 14-19. Lu Fang-yun, Chen W, Frew D J. A design of SHPB experiments for soft materials[J]. Explosion and Shock Waves, 2002, 22(1): 14-19.
[19]	孟益平, 胡时胜.混凝土材料冲击压缩试验中的一些问题[J].实验力学, 2003, 18(1): 108-112. Meng Yi-ping, Hu Shi-sheng. Some problems in the test of concrete under impact compressive loading[J]. Journal of Experimental Mechanics, 2003, 18(1): 108-112.
[20]	巫绪涛, 胡时胜, 孟益平.混凝土动态力学量的应变计直接测量法[J].实验力学, 2004, 19(3): 319-323. Wu Xu-tao, Hu Shi-sheng, Meng Yi-ping. Strain gauge measurement method of dynamic behavior for concrete[J]. Journal of Experimental Mechanics, 2004, 19(3): 319-323.
[21]	巫绪涛, 胡时胜, 田杰. PVDF应力测量技术及其在混凝土冲击实验中的应用[J].爆炸与冲击, 2007, 27(5): 411-415. Wu Xu-tao, Hu Shi-sheng, Tian Jie. Stress-measurement method by PVDF gauge and its application to impact test for concrete[J]. Explosion and Shock Waves, 2007, 27(5): 411-415.
[22]	Wang Li-li, Hu Shi-sheng, Yang Li-ming, et al. Development of experimental methods for impact testing by combining Hopkinson pressure bar with other techniques[J]. Acta Mechanica Solida Sinica, 2014, 27(4): 331-344.
[23]	刘耀东, 虞吉林, 郑志军.惯性对多孔金属材料动态力学行为的影响[J].高压物理学报, 2008, 22(2): 118-124. Liu Yao-dong, Yu Ji-lin, Zheng Zhi-jun. Effect of inertia on the dynamic behavior of cellular metal[J]. Chinese Journal of High Pressure Physics, 2008, 22(2): 118-124.
[24]	王宝珍.胡时胜.猪后腿肌肉的冲击压缩特性实验[J].爆炸与冲击, 2010, 30(1): 33-38. Wang Bao-zhen, Hu Shi-sheng. Dynamic compression experiments of porcine ham muscle[J]. Explosion and Shock Waves, 2010, 30(1): 33-38.
[25]	Wang L L, Labibes K, Azari Z, et al. Generalization of split Hopkinson bar technique to use viscoelastic bars[J]. International Journal of Impact Engineering, 1994, 15(5): 669-686.
[26]	Chen W, Lu F, Frew D J, et al. Dynamic compression testing of soft materials[J]. Journal of Applied Mechanics, 2002, 69(3): 214-223.
[27]	Ellwood S, Griffiths L J, Parry D J. Materials testing at high constant strain rates[J]. Journal of Physics E: Scientific Instruments, 1982, 15(3): 280-282.
[28]	王礼立, 杨黎明.固体高分子材料非线性黏弹性本构关系[C]//王礼立.余同希.冲击动力学进展.合肥: 中国科技大学出版社, 1992: 88-116.
[29]	Yang L M, Shim V P W. An analysis of stress uniformity in split Hopkinson bar test specimens[J]. International Journal of Impact Engineering, 2005, 31(2): 129-150.
[30]	Zhu Jue, Hu Shi-sheng, Wang Li-li. An analysis of stress uniformity for viscoelastic materials during SHPB tests[J]. Latin American Journal of Solids and Structures, 2006, 3(2): 125-148.
[31]	Zhu Jue, Hu Shi-sheng, Wang Li-li. An analysis of stress uniformity for concrete-like specimens during SHPB tests[J]. International Journal of Impact Engineering, 2009, 36(1): 61-72.
[32]	周国才, 胡时胜, 付峥.用于测量材料高温动态力学性能的SHPB技术[J].实验力学, 2010, 25(1): 9-15. Zhou Guo-cai, Hu Shi-sheng, Fu Zheng. SHPB technique used for measuring dynamic properites of material in high temperature[J]. Chinese Journal of Experimental Mechanics, 2010, 25(1): 9-15.
[33]	李玉龙, 索涛, 郭伟国, 等.确定材料在高温高应变率下动态性能的Hopkinson杆系统[J].爆炸与冲击, 2005, 25(6): 487-492. Li Yu-long, Suo Tao, Guo Wei-guo, et al. Determination of dynamic behavior of materials at elevated temperatures and high strain rates using Hopkinson bar[J]. Explosion and Shock Waves, 2005, 25(6): 487-492.
[34]	Chu Chao-hsiang, Wang Li-li, Xu Da-ben. A non-linear thermo-viscoelastic constitutive equation for thermoset plastics at high strain rates[C]//Chien Wei-Zang. Proceedings of the International Conference on Nonlinear Mechanics. Beijing: Science Press, 1985: 92-97.
[35]	施绍裘, 干苏, 王礼立.国产航空有机玻璃在冲击载荷下的热黏弹性力学响应[J].宁波大学学报:理工版, 1990, 3(2): 66-75. Shi Shao-qiu, Gan Su, Wang Li-li. The thermo-viscoelastic mechanical behavior of an aeronautical PMMA under impact loading[J]. Journal of Ningbo University: Natural Science and Engineering Edition, 1990, 3(2): 66-75.
[36]	Wang Li-li, Bao He-sheng, Lu Wei-xian. The dependence of adiabatic shear banding on strain-rate, strain and temperature[J]. Journal de Physique, 1988, 49(9): 207-214.
[37]	薛志刚胡时胜.水泥砂浆在主动围压下的动态力学性能[J].爆炸与冲击, 2008, 28(6): 561-564. Xue Zhi-gang, Hu Shi-sheng. Dynamic behavior of cement mortar under active confinement[J]. Explosion and Shock Waves, 2008, 28(6): 561-564.
[38]	施绍裘, 王礼立.材料在准一维应变下被动围压的SHPB试验方法[J].实验力学, 2000, 15(4): 377-384. Shi Shao-qiu, Wang Li-li. Passive confined pressure SHPB test method for materials under quasi-one dimensional strain state[J]. Chinese Journal of Experimental Mechanics, 2000, 15(4): 377-384.
[39]	张磊, 徐可立, 刘瑞朝, 等.一种霍普金森压杆主动围压实验的围压缸装置: 中国, CN202837089U[P]. 2013-3-27.
[40]	陈荣, 卢芳云, 林玉亮, 等.单脉冲加载的Hopkinson压杆实验中预留缝隙确定方法的研究[J].高压物理学报, 2008, 22(2): 187-191. Chen Rong, Lu Fang-Yun, Lin Yu-Liang, et al. Investigation of the pre-fixed gap in single-pulse loading technique of Hopkinson pressure bars[J]. Chinese Journal of High Pressure Physics, 2008, 22(2): 187-191.
[41]	田杰, 胡时胜.准静态压缩应力-应变曲线测量方法的探索[J].实验力学, 2005, 20(2): 265-269. Tian Jie, Hu Shi-sheng. Investigation on the method of measuring quasi-static compression stress-strain curve[J]. Journal of Experimental Mechanics, 2005, 20(2): 265-269.
[42]	Wang Li-li, Dong Xin-long. Positive and negative strain-rate effect for materials with damage and/or phase transformation at high strain rates[C]//Staudhammer K P, Murr L E, Meyers M A. Fundamental Issues and Applications of Shock-wave and High-strain-rate Phenomena. Amsterdam: Elsevier Science Ltd., 2001: 193-200.
[43]	Johnson G R, Cook W H. A constitutive model and data for metals subjected to large strain rates and high temperatures[C]//Proceedings of the Seventh International Symposium on Ballistics. The Hague, The Netherlands, 1983: 541-548.
[44]	Wang Li-li. A thermo-viscoplastic constitutive equation based on hyperbolic shape thermo-activated barriers[J]. Journal of Engineering Materials and Technology, 1984, 106(4): 331-336.
[45]	Zerilli F J, Armstrong R W. Dislocation mechanics based constitutive relations for material dynamics calculations[J]. Journal of Applied Physics, 1987, 61(5): 1816-1825.
[46]	徐天平, 王礼立, 卢维娴.高应变率下钛合金Ti-6Al-4V的热-黏塑性特性和绝热剪切变形[J].爆炸与冲击, 1987, 7(1): 1-8. Xu Tian-ping, Wang Li-li, Lu Wei-xian. The thermo-viscoplasticity and adiabatic shear deformation for a titanium alloy Ti-6Al-4V under high strain rates[J]. Explosion and Shock Waves, 1987, 7(1): 1-8.
[47]	包合胜, 王礼立, 卢维娴.钛合金在低温下的高速变形特性和绝热剪切[J].爆炸与冲击, 1989, 9(2): 109-119. Bao He-sheng, Wang Li-li, Lu Wei-xian. The high velocity deformation and adiabtic shearing of a titanium alloy at low temperature[J]. Explosion and Shock Waves, 1989, 9(2): 109-119.
[48]	张磊, 胡时胜, 吴家俊. α-钛合金TA6的动态力学性能和绝热剪切现象分析[J].实验力学, 2005, 20(4): 567-572. Zhang Lei, Hu Shi-sheng, Wu Jia-jun. Analysis of adiabatic shearing phenomenon and dynamic mechanical performance on TA-6 of α-titanium alloy[J]. Chinese Journal of Experimental Mechanics, 2005, 20(4): 567-572.
[49]	魏志刚, 李永池, 李剑荣, 等.冲击载荷作用下钨合金材料绝热剪切带形成机理[J].金属学报, 2000, 36(12): 1263-1268. Wei Zhi-gang, Li Yong-chi, Li Jian-rong, et al. Formation mechensim of adiabatic shear band in tungsten heavy alloys[J]. Acta Metallurgica Sinica, 2000, 36(12): 1263-1268.
[50]	肖大武, 李英雷, 胡时胜, 等.纯锆的压缩变形行为[J].稀有金属材料与工程, 2008, 37(12): 2122-2124. Xiao Da-wu, Li Ying-lei, Hu Shi-sheng, et al. Compression deformation behavior of puer zirconium[J]. Rare Metal Materials and Engineering, 2008, 37(12): 2122-2124.
[51]	胡昌明.镁铝合金的动态力学性能研究[D].合肥: 中国科学技术大学, 2003: .
[52]	Wang L, Dong X, Hu S, et al. A macro-and microscopic study of adiabatic shearing extension of mode-II crack at dynamic loading[J]. Journal de Physique IV, 1994, 4: 465-470.
[53]	唐志平, 朱兆祥, 王礼立, 等.高应变率下环氧树脂的力学性能[C]//第二届全国爆炸力学会议论文集.扬州, 1981.
[54]	杨黎明.王礼立.用Eshelby理论研究复合材料线黏弹性本构关系[J].爆炸与冲击, 1991, 11(3): 244-251. Yang Li-ming, Wang Li-li. An investigation on the linear viscoelastic constitutive relation for a composite on the basis of Eshelby's theory[J]. Explosion and Shock Waves, 1991, 11(3): 244-251.
[55]	Yang L M, Shim V P W. A visco-hyperelastic constitutive description of elastomeric foam[J]. International Journal of Impact Engineering, 2004, 30(8/9): 1099-1110.
[56]	Wang L L, Shi S Q, Chen J Y, et al. Influence of strain-rate and stress-state on dynamic response of cement mortar[J]. International Journal of Structural Stability and Dynamic, 2003, 3(3): 419-433.
[57]	王礼立, 张忠伟, 黄德进, 等.船撞桥的钢丝绳圈柔性防撞装置的冲击动力学分析[C]//洪友士.应用力学进展: 祝贺郑哲敏先生八十华诞.北京: 科学出版社, 2004: 172-180.
[58]	周风华, 王礼立, 胡时胜.有机玻璃在高应变率下的损伤型非线性黏弹性本构关系及破坏准则[J].爆炸与冲击, 1992, 12(4): 333-342. Zhou Feng-hua, Wang Li-li, Hu Shi-sheng. A damage-modified nonlinear visco-elastic constitutive relation and failure criterion of PMMA at high strain-rates[J]. Explosion and Shock Waves, 1992, 12(4): 333-342.
[59]	朱兆祥, 徐大本, 王礼立.环氧树脂在高应变率下的热黏弹性本构方程和时温等效性[J].宁波大学学报:理工版, 1988, 1(1): 58-68. Zhu Zhao-xiang, Xu Da-ben, Wang Li-li. Thermoviscoelastic constitutive equation and time-temperature equivalence of epoxy resin at high strain rates[J]. Journal of Ningbo University, 1988, 1(1): 58-68.
[60]	谭子翰, 徐松林, 章超, 等.不同温度下两种钨结构增强Zr-基非晶合金动态压缩性能研究[J].爆炸与冲击, 2013, 33(3): 225-230. Tan Zi-han, Xu Song-lin, Zhang Chao, et al. Dynamic compressive properties of two tungsten structure reinforced Zr-based metallic glass composites at different temperatures[J]. Explosion and Shock Waves, 2013, 33(3): 225-230.
[61]	刘剑飞, 胡时胜, 胡元育, 等.花岗岩的动态压缩实验和力学性能研究[J].岩石力学与工程学报, 2000, 19(5): 618-621. Liu Jian-fei, Hu Shi-sheng, Hu Yuan-yu, et al. Research on dynamic compressive testing and mechanics properties of granite[J]. Chinese Journal of Rock Mechanics and Engineering, 2000, 19(5): 618-621.
[62]	薛志刚, 胡时胜.水泥砂浆在主动围压下的动态力学性能[J].爆炸与冲击, 2008, 28(6): 561-564. Xue Zhi-gang, Hu Shi-sheng. Dynamic behavior of cement mortar under active confinement[J]. Explosion and Shock Waves, 2008, 28(6): 561-564.
[63]	陈柏生, 胡时胜, 马芹永, 等.冻土动态力学性能的实验研究[J].力学学报, 2005, 37(6): 724-728. Chen Bai-sheng, Hu Shi-sheng, Ma Qin-yong, et al. Experimental research of dynamic mechanical behaviors of frozen soil[J]. Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(6): 724-728.
[64]	李英雷, 胡时胜, 李英华. A95陶瓷材料的动态压缩测试研究[J].爆炸与冲击, 2004, 24(3): 233-239. Li Ying-lei, Hu Shi-sheng, Li Ying-hua. Research on dynamic behaviors of A95 ceramics under compression[J]. Explosion and Shock Waves, 2004, 24(3): 233-239.
[65]	胡时胜, 王道荣, 刘剑飞.混凝土材料动态力学性能的实验研究[J].工程力学, 2001, 18(5): 115-118. Hu Shi-sheng, Wang Dao-rong, Liu Jian-fei. Experimental study of dynamic mechancial behavior of concrete[J]. Engineering Mechanics, 2001, 18(5): 115-118.
[66]	胡时胜, 王道荣.冲击载荷下混凝土材料的动态本构关系[J].爆炸与冲击, 2002, 22(3): 242-246. Hu Shi-sheng, Wang Dao-rong. Dynamic constitutive relation of concrete under impact[J]. Explosion and Shock Waves, 2002, 22(3): 242-246.
[67]	巫绪涛, 胡时胜, 陈德兴, 等.钢纤维高强混凝土冲击压缩的试验研究[J].爆炸与冲击, 2005, 25(2): 125-131. Wu Xu-tao, Hu Shi-sheng, Chen De-xing, et al. Impact compression experiment of steel fiber reinforced high strength concrete[J]. Explosion and Shock Waves, 2005, 25(2): 125-131.
[68]	胡俊, 巫绪涛, 胡时胜. EPS混凝土动态力学性能研究[J].振动与冲击, 2011, 30(7): 205-209. Hu Jun, Wu Xu-tao, Hu Shi-sheng. Dynamic mechanical behavior of EPS concrete[J]. Journal of Vibration and Shock, 2011, 30(7): 205-209.
[69]	朱珏.混凝土类材料冲击本构特性的SHPB技术及Lagrange反解法的研究[D].合肥: 中国科学技术大学, 2006.
[70]	胡时胜, 刘剑飞, 王梧.硬质聚氨酯泡沫塑料本构关系的研究[J].力学学报, 1998, 30(2): 151-156. Hu Shi-sheng, Liu Jian-fei, Wang Wu. Study of the constitutive relationship of rigid polyurethane foam[J]. Acta Mechanica Sinica, 1998, 30(2): 151-156.
[71]	王鹏飞, 胡时胜.轴向尺寸对泡沫铝动静态力学性能的影响[J].爆炸与冲击, 2012, 32(4): 393-398. Wang Peng-fei, Hu Shi-sheng. Mechanical properties of foam aluminum with different sizes[J]. Explosion and Shock Waves, 2012, 32(4): 393-398.
[72]	王鹏飞, 徐松林, 郑航, 等.变形模式对多孔金属材料SHPB实验结果的影响[J].力学学报, 2012, 44(5): 928-932. Wang Peng-fei, Xu Song-lin, Zheng Hang, et al. Influence of deformation modes on SHPB experimental results of cellular metal[J]. Chinese Journal of Theoretical and Applied Mechanics, 2012, 44(5): 928-932.
[73]	王鹏飞, 徐松林, 李志斌, 等.高温下轻质泡沫铝动态力学性能实验[J].爆炸与冲击, 2014, 34(4): 433-438. Wang Peng-fei, Xu Song-lin, Li Zhi-bin, et al. An experimental study on dynamic mechanical property of ultra-light aluminum foam under high temperatures[J]. Explosion and Shock Waves, 2014, 34(4): 433-438.
[74]	胡时胜, 王正道, 赵立中.泡沫硅橡胶动态力学性能的实验研究[J].高分子材料科学与工程, 1999, 15(2): 113-115. Hu Shi-sheng, Wang Zheng-dao, Zhao Li-zhong. Experimental study of dynamic mechanical behaviors of sllicone rubber foam[J]. Polymer Materials Science and Engineering, 1999, 15(2): 113-115.
[75]	王宝珍, 胡时胜, 周相荣.不同温度下橡胶的动态力学性能及本构模型研究[J].实验力学, 2007, 22(1): 1-6. Wang Bao-Zhen, Hu Shi-sheng, Zhou Xiang-rong. Research of dynamic mechanical behavior and constitutive model of rubber under different temperatures[J]. Chinese Journal of Experimental Mechanics, 2007, 22(1): 1-6.
[76]	王宝珍, 胡时胜.猪后腿肌肉的冲击压缩特性实验[J].爆炸与冲击, 2010, 30(1): 33-38. Wang Bao-zhen, Hu Shi-sheng. Dynamic compression experiments of porcine ham muscle[J]. Explosion and Shock Waves, 2010, 30(1): 33-38.
[77]	王宝珍, 郑宇轩, 胡时胜.猪后腿肌肉的动态拉伸性能[J].爆炸与冲击, 2010, 30(5): 449-455. Wang Bao-zhen, Zheng Yu-xuan, Hu Shi-sheng. Dynamic tensile properties of porcine ham muscle[J]. Explosion and Shock Waves, 2010, 30(5): 449-455.
[78]	王鹏飞, 罗斌强, 胡时胜.套管式冲击拉伸实验装置的研制[J].实验力学, 2009, 24(6): 513-518. Wang Peng-fei, Luo Bin-qiang, Hu Shi-sheng. Development of the casing type impact tension experiment device[J]. Journal of Experimental Mechanics, 2009, 24(6): 513-518.
[79]	胡时胜, 邓德涛, 任小彬.材料冲击拉伸实验的若干问题探讨[J].实验力学, 1998, 13(1): 9-14. Hu Shi-sheng, Deng De-tao, Ren Xiao-bin. A study on impact tensile test of materials[J]. Journal of Experimenal Mechanics, 1998, 13(1): 9-14.
[80]	Zhang Lei, Hu Shi-sheng, Chen De-xing, et al. An experimental technique for spalling of concrete[J]. Experimental Mechanics, 2009, 49(4): 523-532.
[81]	李玉龙, 郭伟国, 贾德新, 等. 40Cr材料动态起裂韧性的实验测试[J].爆炸与冲击, 1996, 16(1): 21-30. Li Yu-long, Guo Wei-guo, Jia De-xin, et al. Experimental measurement of dynamic fracture initiation toughness of 40Cr steel[J]. Explosion and Shock Waves, 1996, 16(1): 21-30.
[82]	董新龙, 虞吉林, 胡时胜, 等.高加载率下Ⅱ型裂纹试样的动态应力强度因子及断裂行为[J].爆炸与冲击, 1998, 18(1): 62-68. Dong xin-long, Yu Ji-lin, Hu Shi-sheng, et al. Stress intensity factor and fracture behavior for mode Ⅱ crack specimen under high shear loading rate[J]. Explosion and Shock Waves, 1998, 18(1): 62-68.
[83]	崔云霄, 卢芳云, 林玉亮, 等.一种新的高应变率复合压剪实验技术[J].实验力学, 2006, 21(5): 584-590. Cui Yun-xiao, Lu Fang-yun, Lin Yu-liang, et al. A new combined compression-shear loading technique at high strain rates[J]. Journal of Experimenal Mechanics, 2006, 21(5): 584-590.
[84]	郑文, 徐松林, 蔡超, 等.基于Hopkinson压杆的动态压剪复合加载实验研究[J].力学学报, 2012, 44(1): 124-131. Zheng Wen, Xu Song-lin, Cai Chao, et al. A study of dynamic combined compression-shear loading technique based on Hopkinson pressure bar[J]. Chinese Journal of Theoretical and Applied Mechanics, 2012, 44(1): 124-131.
[85]	李玉龙, 郭伟国, 贾德新, 等.高g值加速度传感器校准系统的研究[J].爆炸与冲击, 1997, 17(1): 90-96. Li Yu-long, Guo Wei-guo, Jia De-xin, et al. An equipment for calibrating high shock acceleration sensors[J]. Explosion and Shock Waves, 1997, 17(1): 90-96.
[86]	王文军, 胡时胜.高g值加速度传感器的标定[J].爆炸与冲击, 2006, 26(6): 568-571. Wang Wen-jun, Hu Shi-sheng. Calibration of high shock acceleration sensors[J]. Explosion and Shock Waves, 2006, 26(6): 568-571.
[87]	张学舜, 沈瑞琪.火工品动态着靶模拟仿真技术研究[J].火工品, 2003(4): 1-4. Zhang Xue-shun, Shen Rui-qi. Study on dynamic tough-target analog simulation technique for initiating explosive devices[J]. Initiators and Pyrotechnics, 2003(4): 1-4.
[88]	张磊, 胡时胜, 陈德兴, 等.混凝土材料的层裂特征[J].爆炸与冲击, 2008, 28(3): 193-199. Zhang Lei, Hu Shi-sheng, Chen De-xing, et al. Spall characteristics of concrete materials[J]. Explosion and Shock Waves, 2008, 28(3): 193-199.
[89]	章超, 徐松林, 王鹏飞.基于数字图像相关方法对冲击载荷下泡沫铝全场变形过程的测试[J].实验力学, 2013, 28(5): 629-634. Zhang Chao, Xu Song-lin, Wang Peng-fei. Test of aluminum foam deforming process under impact load based on digital image correlation method[J]. Journal of Experimental Mechanics, 2013, 28(5): 629-634.