摘要:
针对跨介质航行体水平穿浪的运动稳定性问题,基于流固交界面载荷与位移的双向传递机制建立流固耦合数值模型,对椭球、半球和截锥三种头型航行体水平穿浪过程开展仿真,分析了头型对空泡形态、水动力特性、运动姿态及结构响应的影响规律。结果表明:穿浪后期航行体局部沾湿会改变空泡形态,易引起水动力载荷波动并降低姿态稳定性,其中椭球与半球头型在穿浪后期沾湿范围较大,所受影响更为显著。半球头型产生的空泡较大,阻力、升力和俯仰力矩的峰值较高,速度衰减明显,姿态波动较强,头部局部区域应力响应也较明显;椭球头型曲率沿轴向过渡较为平缓,阻力、升力和俯仰力矩峰值相对较低,速度保持能力较好,结构响应相对较小;截锥头型受锥面影响,姿态变化较弱,但头部几何突变易引起载荷波动,并在前端截面及锥面过渡区域形成应力集中和塑性应变,增加了局部结构损伤风险。
Abstract:
To investigate the motion stability of a cross‑medium vehicle during horizontal wave‑piercing, a fluid-structure interaction numerical model was built upon the two‑way transfer of loads and displacements across the fluid-structure interface. Simulations of horizontal wave‑piercing were performed for vehicles with ellipsoidal, hemispherical, and truncated‑cone noses, and the influence of nose shape on cavity morphology, hydrodynamic loads, motion attitude, and structural response was analyzed.The results show that local wetting in the later stage of wave‑piercing alters the cavity morphology and tends to cause fluctuations in hydrodynamic loads while weakening attitude stability. This influence is more evident for the ellipsoidal and hemispherical noses, which develop larger wetted areas during this stage. The hemispherical nose generates a larger cavity and higher peaks in drag, lift, and pitching moment, accompanied by more pronounced velocity attenuation, stronger attitude oscillation, and a clearer local stress response near the nose. The ellipsoidal nose, with its smoother axial curvature transition, helps reduce these peak loads, sustain a higher velocity, and produce a milder structural response. For the truncated‑cone nose, the conical surface limits attitude variation to some extent, yet the abrupt geometric transition at the nose readily induces load fluctuations. Stress concentration and plastic strain then occur in the front section and cone transition region, raising the risk of local structural damage.